1)high carbon ferromanganese高碳锰铁
1.It analyses the behavior of remained ferroalloy in smelting process, proves that taking use of remained ferroalloy process notonly can greatly improve technological economic indexes in smelting high carbon ferromanganese and ferromanganese-silicon, but also can raise the productivity of furnace.通过留铁法在冶炼过程中的行为实践分析,证明留铁法冶炼高碳锰铁和锰硅合金不仅大大地改善了技术 经济指标,而且提高了电炉的生产能力。
2.Adopting microwave digestion technology to digest samples, the contents of Si, P, Cu and V in high carbon ferromanganese are determined with ICP-AES method, and the optimal work conditions are researched.采用微波消解技术消解样品,用ICP-AES法测定高碳锰铁中Si,P,Cu,V含量,研究该方法的最佳工作条件,通过对样品的分析试验、回收试验及精密度试验,证明该方法准确度高,精密度好,与化学法相比该方法快速、实用。
3.Based on the domestic manganese mineral resources and the common fluxe smelting processes for high carbon ferromanganese and Mn Si ferroalloy by submerged electric furnace, the main technological and economic indexes were compared and analyzed.根据我国锰矿资源条件 ,结合现行的熔剂法工艺在电炉中冶炼高碳锰铁和锰硅合金 ,通过对多项主要技术经济指标的对比和可行性分析表明 ,高硅酸性锰矿采用无熔剂法或少熔剂法工艺生产锰硅合金 ,既可提高锰和硅的回收率 ,增加铁合金产量 ,使锰矿资源得到更充分的利用 ;又可降低能耗和原料的消耗 ,使产品的生产成本降低 ,经济效益提
英文短句/例句
1.Investigation on Technology and Mechanism of High Carbon Ferromanganese Alloys by Pelletization-Reducing Smelting Process Using Manganese Ore Fines Containing High Combined Water高结晶水锰矿粉球团还原冶炼高碳锰铁合金工艺及机理研究
2.RESEARCH AND PRACTICE ON ENHANCE THE GAS YIELD INTO THE GASOMETER IN WET DUST COLLECTION OF ORE HEAT FURNACE对提高高碳锰铁电炉湿法除尘煤气入柜率的研究与实践
3.Guimeng alloys, an electric high-carbon, ferromanganese, low ferromanganese smelting sales.硅锰合金、电炉高碳、锰铁、低度锰铁冶炼销售。
4.Methods for chemical analysis of ferromanganese and blast furnace ferromanganese--The gravimetric method for the determination of carbon contentGB/T7730.7-1988锰铁及高炉锰铁化学分析方法重量法测定碳量
5.Methods for chemical analysis of ferromanganese and blast furnace ferromanganese--The infrared absorption method for the determination of carbon contentGB/T7730.5-1988锰铁及高炉锰铁化学分析方法红外线吸收法测定碳量
6.Methods for chemical analysis of ferromanganese and blast furnace ferromanganese--The gasometric method for the determination of carbon contentGB/T7730.6-1988锰铁及高炉锰铁化学分析方法气体容量法测定碳量
7.Study on Continuous Titration Detemination of Manganese and Iron in the Manganese Ore中碳锰铁矿中锰和铁的连续测定研究
8.As viewed from application of the technoogy of producing high-pure manganes carbonate using poor manganese, ferrisulphas and ammonium hydrogen carbonate as raw material is introduced.本文从应用的角度出发,介绍了以贫锰矿、酸亚铁、酸氢控等为原料,生产高纯碳酸锰的方法。
9.Found trace elements of iron, chromium, manganese and carbon.找到东西的成分是铁,铬,锰以及碳
10.Effect of Manganese Content on Structures and Properties of Low Carbon White Cast Iron锰对低碳白口铸铁组织与性能的影响
11.The effect of C and Mn contents on ferrite nucleation rate during Deformation-Enhanced Ferrite Transformation (DEFT) in low carbon (Mn) steels was investigated.研究了碳、锰含量对低碳(锰)钢形变强化铁素体晶粒数目变化的影响.
12.Carburization of Sponge Ferromanganese for Manganese Oxide Fines Containing Coal by Microwave Heating微波加热含碳氧化锰矿粉体还原过程中锰铁金属化物的渗碳行为
13.Methods for chemical analysis of ferromanganese and blast furnace ferromanganese--The potentiometric method for the determination of manganese contentGB/T7730.1-1987锰铁及高炉锰铁化学分析方法电位滴定法测定锰量
14.Research on Process of Manganese Carbonate Pure by Directly Acid Leaching of Soft Manganese Ore贫软锰矿直接酸浸生产高纯碳酸锰的工艺研究
15.Using Medium Mn-Ducpile Iron Instead of High Mn-Steel to Produce Pot Mill Scaleboard;用中锰球铁代替高锰钢生产球磨机衬板
16.An Investigation on Structure and Properties of Cr-Ni-Mn-Mo Low Carbon High Alloy Steel;铬镍锰钼低碳高合金钢组织性能研究
17.Modification of PAN Carbon Fiber Precursor Using Potassium PermanganatePAN基碳纤维原丝的高锰酸钾改性(英文)
18.Methods for chemical analysis of ferromanganese and blast furnace ferromanganese--The perchloric acid dehydration-gravimetric method for the determination of silicon contentGB/T7730.2-1987锰铁及高炉锰铁化学分析方法高氯酸脱水重量法测定硅量
相关短句/例句
high carbon ferromanganese alloys高碳锰铁合金
1.How to utilize the imported manganese ore fines containing high combined water to make good quality,and then to smelt high carbon ferromanganese alloys was studied.本研究主要以某进口高结晶水锰矿粉为原料,通过制取合格成品球团矿,进而通过电炉冶炼制取高碳锰铁合金,为国内有效利用此类锰矿粉提供合适的途径。
3)Medium carbon ferromanganese中碳锰铁
4)low carbon ferromanganese低碳锰铁
1.To reduce carbon content, taking the following measures such as increasing silicon conlent([Si]%>25%) in silicomanganese, reducing outside carbon content,operating in low basicity in smelting low carbon ferromanganese etc.为降低碳含量,在低碳锰铁生产过程中,通过提高锰硅合金中硅含量([Si]％>25%),减少外部增碳以及采用低碱度操作等措施,得到了理想的低碳锰铁生产工艺。
5)high carbon and high manganese steel高碳锰钢
6)High Manganese Carbon Steel高锰碳钢
延伸阅读
高碳锰铁高碳锰铁根据生产方法不同分为电炉高碳锰铁和高炉高碳锰铁。
