1)Titanium Content钛含量
1.Effect of Titanium Content on Mechanical Properties of Hot Rolled Plate of Nb-Ti Microalloying Q345A Steel;钛含量对Nb-Ti微合金化Q345A钢热轧板力学性能的影响
2.Effect of titanium alloying manner and titanium content on microstructure and mechanical properties of A356 alloys;加钛方式与钛含量对A356合金组织和性能的影响
英文短句/例句
1.Titanium Content Forecasting in Hot Metal Based on Univariate ARIMA Model单变量ARIMA模型的铁水钛含量预报
2.Note:Titanium content is the rest except of all impurities.注：钛含量由减量法减去表中杂质元素含量之和得到。
3.Determination of Titanium in Tin and Titanium Alloy by ICP-AES电感耦合等离子体发射光谱法测定锡钛合金中钛含量
4.Effect of MinimTitanium on Dynamic Transformation of Undercooled Austenite of Hot Rolled Steel Containing Vanadium微量钛对热轧含钒钢动态相变的影响
5.Effect of Aluminum Content on the Microstructure and Oxides in Titanium Micro-alloyed Steel铝含量对含钛钢中氧化物及凝固组织的影响
6.Effects of Impurities- Composition and Microstructure on Propertie of TA15 Titanium AlloyN、O、Fe的含量对TA15钛合金性能和组织的影响
7.Influence of HfO_2 contents in ZrO_2 raw material on the properties of Pb(Sb, Nb)O_3-Pb(Zr, Ti)O_3 piezoceramicsHfO_2含量对铌锑锆钛酸铅压电陶瓷性能的影响
8.Influence of Content of α-Al_2O_3 Fine Powder on Properties of MgO-based Investment Materials Cast Tiα-Al_2O_3细粉含量对MgO系铸钛包埋材料性能的影响
9.THE DETERMINATION OF TITANIA CONTENT IN THE CATALYST BY DISPLACEMENT TITRATION METHOD置换滴定法测定催化剂中二氧化钛的含量
10.Determination of Cu,Ni and Zr in Ti-based alloy by ICP-AESICP-AES法测定钛基合金中Cu、Ni和Zr的含量
11.Relating to or containing titanium, especially with valence4.钛的与钛有关的或含钛的，尤其是四价钛
12.Experi-ments showed that the titanium of different contents had varied influences on the structure and proper-ties of gray iron.试验表明,不同含量的钛对灰铸铁组织和性能产生不同的影响。
13.an alloy used to make high-energy permanent magnets; contains aluminum and iron and nickel plus cobalt or copper or titanium.一种用于制高能量永久磁铁的合金，含铝、铁、镍以及钴或铜或钛。
14.OBJECTIVE To establish an assay method for phenyl salicylate in compound titanium dioxide cream.目的:建立复方二氧化钛乳膏中水杨酸苄酯的含量测定方法。
15.The synthesised calcium titanate was used to prepare epoxy coatings with varying contents of the anticorrosion pigment.合成的钛酸钙与不同含量的防腐颜料用于制备环氧树脂涂料。
16.Heat Treatment Process for Rapidly Refining Cast Microstructure of TiAl Alloy with Low Aluminium Content快速细化低铝含量钛铝合金铸态组织的热处理工艺
17.An Ecological Survey and Research of Heavy Metal Contents on Vegetation at Panzhihua Lead/Titanium Mine Area in Sichuan Province攀枝花钒钛矿区植被群落调查及植物金属含量分析研究
18.THE INFLUENCE OF ZR CONTENT ON PROPERTIES OF Al_2O_3-BASED INVESTMENT MATERIALS金属锆粉含量对氧化铝质铸钛包埋材料性能的影响
相关短句/例句
Ti content钛含量
1.Effects of Ti content on austenite coarsening temperature in AH36 steel were studied with Gleeble 1500 thermal simulator.结果表明 :钛含量增加 ,钢的粗化温度提高 ,该钢合理的加热温度范围为12 0 0～ 12 5 0℃。
2.Effects of chemical composition and rolling schedule on mechanical properties of 10 Ti steel have been studied in order to optimize Ti content and stabilize mechanical properties by using mechanical test, phase-analysis, SEM and TEM etc.为了节约钢中钛含量,稳定力学性能,本文采用力学性能;相分析;扫描电镜、透射电镜等试验,研究了成分、轧制工艺对10Ti钢力学性能的影响机制。
3)total Ti content总钛含量
4)concentrations of tilanium and iron钛铁含量
5)effective titanium content有效钛含量
1.The influences of six kinds of conditioning heat treatments and different effective titanium contents on the behavior of austenite grain coarsening were studied.研究了6种预先热处理工艺及有效钛含量对18CrMmVB钢奥氏体晶粒长大行为的影响。
6)titanium analyzer钛含量分析仪
延伸阅读
5t钛还原蒸馏炉(遵义钛厂)5t钛还原蒸馏炉(遵义钛厂) 5t钛还原蒸馏联合炉(遵义钛厂)
