生坯密度,green density英语短句,例句大全

生坯密度,green density
1)green density生坯密度
1.The results show that more green density causes more densification but less linear shrinkage and higher burnout temperature causes more densification but less densification rate.发现生坯密度越大,排蜡后绝缘子线收缩越小,致密化程度大大提高;随排蜡温度升高,绝缘子致密化程度增大,致密化速率减小。
2.The effects of impact energy and compaction methods on the green density,the maximal impact force,the withdraw force and the radial springback were discussed.采用高速压制技术制备铁基制品,探讨了冲击能量及冲击速度与冲击行程之间的关系,并研究了冲击能量、压制方式对生坯密度、最大冲击力、脱模力和径向弹性后效的影响。
3.The effects of impact energy and impact times on the green density, the maximal impact force and the withdraw force of specimen were investigated.研究电解铜粉高速压制成形工艺,探讨冲击能量、压制次数对生坯密度、最大冲击力和脱模力的影响。

英文短句/例句

1.Effects of Injection Molding Parameters on Feedstock Density of Pure Copper Powder Injection Molding成型参数对纯铜粉末注射生坯密度的影响
2.THE INFLUENCE OF THE REAL DENSITY OF CALCINED COKE ON THE BULK DENSITY OF GREEN ELECTRODES煅后焦真密度对生坯电极体积密度的影响
3.high refractive index and low density optical lens blank高折射低密度光学镜片毛坯
4.Determination of Heat Flow Density in Fillet Radius Area of Billet Mold方坯结晶器角部弧形区热流密度测定
5.Effects of Different Argonr Atmosphere and Green Density on Combustion Synthesis of Ti_3AlC_2 Powders;不同气氛和素坯密度对燃烧合成Ti_3AlC_2粉体的影响
6.Influence of Secondary Cooling Water Distribution on Crater Shape of Continuously Cast Slab二冷水流密度分布对板坯液芯形状影响的研究
7.The Densification of W-Cu Green in Continuous Liquid Phase Sintering钨铜生坯在连续液相烧结中的致密化行为
8.Analysis of Different Technological Processes on the Clean Degree of Ultra-low Carbon SteelBOF-RH-CC生产超低碳钢板坯洁净度研究
9.With the increasement of material’s density ,the fracture strain trace position ascended and deformation safety region was enlarged.润滑和增大坯料密度可使断裂应变迹线上移,变形安全区增大。
10.Research on surface flattening technology of the precision forming for large curvature reflector panel大曲率高精度反射器面板精密成形坯料展开技术
11.EFFECT OF RESHAPING TECHNOLOGY OF PARTICLE ON DENSITY OF GREEN BODY OF SLIP CAST SiC颗粒的整形工艺对注浆成型碳化硅素坯密度的影响
12.Effect of Compact Density on Combustion Synthesis of W-C-Co System Based on Electric Field电场作用下压坯密度对W-C-Co体系燃烧合成的影响
13.Research on the Technology and Quality of Producing Rod Billets by Large Size Molybdenum Powder大粒度钼粉生产棒坯的工艺及质量研究
14.Practice of controlling the surface transverse crack of high-strength Niobium bearing steel for continuous casting slab控制高强度含铌连铸板坯表面横裂的生产实践
15.Optimization on Secondary Cooling Scheduling for 0.45C Steel Billet Casting at Nanjing Steel南钢小方坯连铸生产45钢二冷制度的优化
16.Measurement of the Solidified Shell Thickness in the Secondary Cooling Zone of Continuous Casting of Bloom大方坯连铸二冷区凝固坯壳厚度测试
17.Production practice on casting the round tube blank of steel 20 with round tube blank continuous caster圆坯连铸机浇铸20钢铸坯的生产实践
18.Through the combination with actual production and optimization of seconday cooling system,billet quality has been improved obviously.与现场生产实际结合,优化二次冷却制度,铸坯质量得到明显提高。

相关短句/例句

compact density生坯密度
1.Associated with the massproduction of sintered Nd-Fe-B magnets currently in China,an investigation is presented in this papers of the impact of compact density on microstructure and magnetic properties of sintered Nd-Fe-B magnets.结合国内烧结 Nd— Fe— B磁体工业生产过程 ,研究了压制成型时生坯密度变化对烧结 Nd—Fe— B磁体致密化程度、显微组织、取向度与磁性能的影响。
2.Associated with the mass-production of sintered Nd-Fe-B magnets currently in China, an investigation is presented in this paper of the impact of compact density on microstructure and magnetic properties of sintered Nd-Fe-B magnets.结合国内烧结Nd-Fe-B磁体工业生产过程,研究了压制成型生坯密度对烧结Nd-Fe-B磁体致密化程度、显微组织、取向度及磁性能的影响。
3)threshold compact density临界生坯密度
4)green apparent density生坯表观密度
5)green density压坯密度
1.Warm compaction behavior of 316L stainless steel was investigated, influences of processing parameters of warm compaction on green density of 316L stainless steel were studied.研究316L不锈钢的温压行为,分析温压工艺参数对压坯密度的影响。
2.It is found that the green density and sintered density of YBa_2Cu_3O_(7-δ) powders with different granularity varied differently with the variation of pressure.结果表明,不同粒度YBaCuO超导粉体的压坯密度、烧结密度(即烧结前后的致密度)随压力的变化规律不同。
3.Influences of processing parameters of warm compaction on green density of 420 stainless steel were studied.对420不锈钢粉末进行温压,探索温压工艺参数对压坯密度的影响,并对温压与室温模压(添加0。
6)compact density压坯密度
1.The effect of compact density on combustion synthesis of Fe-V-C mixture powders based in electric field was studied using Gleeble thermal simulation equipment.采用Gleeble热模拟机,在电场和大热流密度作用下,研究压坯密度对Fe-V-C三元系粉末压坯燃烧合成的影响。
2.Using Gleeble-1500D thermal simulation equipment, the effect of compact density on the low temperature combustion synthesis process of the compact of 55wt%(Ti+C)-45wt%Fe mixture powders was studied.采用Gleeble-1500D 热模拟机,在电场和大热流密度作用下,研究压坯密度对55%(Ti+C)-45%Fe(质量分数)粉末压坯低温燃烧合成过程的影响。
3.The paper analyzed the effect of sintering temperature,ball milling method and compact density on the density of MoSi2 disperslion-strengthened copper alloy.分析了烧结温度、球磨方式和压坯密度对MoSi2弥散强化铜合金烧结密度的影响。