压汞仪法,mercury intrusion porosimetry(MIP) method英语短句,例句大全

压汞仪法,mercury intrusion porosimetry(MIP) method
1)mercury intrusion porosimetry(MIP) method压汞仪法
2)mercury injection apparatus压汞仪
3)mercury porosimeter汞压测孔仪
4)mercury intrusion porosimetry压汞法
1.In this paper, the physical characteristics of rice husk and char particles prepared under different gasification processes were studied by physical adsorption/desorption measurements of N2 (-196℃), mercury intrusion porosimetry (414 MPa) and true density measurement (He).本文通过氮气等温吸附/脱附法(-196℃)、压汞法(414MPa)、真密度仪(He)等详细研究了在气化条件下谷壳的物理结构的演化,同时利用元素分析和傅里叶红外对颗粒化学结构进行分析。
2.Pore volume fractal dimensions of fly ash - cement paste at different ages and its pore volume fractal dimensions were determined by MIP(mercury intrusion porosimetry) on experiments.采用压汞法对不同龄期粉煤灰-水泥浆体的孔分形结构进行了实验研究,测定了复合浆体孔体积分形维数,探讨了孔体积分形维数与孔隙率,孔表面积、平均孔径、孔分布及宏观力学性能的关系。
3.In this study, the mercury intrusion porosimetry (MIP) tests were performed on the natural sedimentary diatomaceous soil to investigate the relationship between the change in entrance pore size distribution and the applied stress level.采用压汞法研究了不同固结压力作用下具有强结构性的天然沉积硅藻土的微观孔隙入口孔径分布与应力水平的关系。

英文短句/例句

1.mercury intrusion pore size distribution压汞法孔隙大小分布
2.The micropore content was measured by mercury porosimeter.用压汞法测定了拉伸丝的微孔含量。
3.Nitrogen Adsorption Method and Mercury Injection Method Determination the Pore Structure of Alumina Carrier氮气吸附法和压汞法测定Al_2O_3载体孔结构
4.Investigation of Pore Structures of C/C Composite Plates by Mercury Intrusion Method压汞法分析C/C复合材料平板的孔隙结构
5.Fractal study of low permeability reservoir based on constant-rate mercury injection基于恒速压汞法的低渗透储层分形研究
6.Test methods for the characteristics of getter-mercury dispenser--Method for peel off test of getter-mercury dispenserGB/T6626.4-1986释汞吸气剂性能测试方法释汞吸气剂压粉牢固度的检验方法
7.capillary pressure withdrawal curve退汞毛细管压力曲线
8.shows pressure by the height of a column of mercury.由汞柱的高度测量气压。
9.Silicon epitaxial layers--Determination of carrier concentration--Mercury probe Voltage-capacitance methodGB/T14146-1993硅外延层载流子浓度测定汞探针电容-电压法
10.Simultaneous determination of the content of Methyl mercury,Ethyl mercury and Inorganic mercury in water samples by HPLC-ICP-MSHPLC-ICP-MS法测定水样中的甲基汞、乙基汞和无机汞
11.Test methods for the characteristics of getter-mercury dispenser--Test method for mercury content of getter-mercury dispenserGB/T6626.2-1986释汞吸气剂性能测试方法释汞吸气剂含汞量的测试方法
12.Test methods for the characteristics of getter-mercury dispenser--Test methods for mercury yield characteristic of getter-mercury dispenserGB/T6626.1-1986释汞吸气剂性能测试方法释汞吸气剂释汞特性的测试方法
13.RESEARCH ON DETERMINATION OF COD IN HIGH CHLORIDE WATER BY MERCURY-FREE,HIGH-SILVER,LOW-PRESSURE DIGESTION METHOD COMPARED WITH CHLORINE EMENDATION METHOD无汞高银低压消解法与氯气校正法测定高氯水体中化学需氧量的比较研究
14.Simultaneous Determination of Lead and Mercury in PVC by Sealing Digestion AFS-230E高压密封罐消解双光道原子荧光光谱同时测定PVC中铅和汞的方法研究
15.Measure of mercury spectroscopy in mercury-cefazolin sodium system;汞-头孢唑林钠体系中汞的分光光度法测定
16.Direct Determination of Mercury in Cutting Fluid and Machining Process Waste Fluid切削液和机床排泄物中汞的测定-直接测汞法
17.Decrease of consumption and pollution of mercury in PVC Industry by calcium carbide method电石法聚氯乙烯生产中汞消耗与汞污染的降低
18."Pressure Rating to 250 PSI, Vacuum to 28"Mercury"压力等级为250PSI,真空下为28英寸汞柱。

相关短句/例句

mercury injection apparatus压汞仪
3)mercury porosimeter汞压测孔仪
4)mercury intrusion porosimetry压汞法
1.In this paper, the physical characteristics of rice husk and char particles prepared under different gasification processes were studied by physical adsorption/desorption measurements of N2 (-196℃), mercury intrusion porosimetry (414 MPa) and true density measurement (He).本文通过氮气等温吸附/脱附法(-196℃)、压汞法(414MPa)、真密度仪(He)等详细研究了在气化条件下谷壳的物理结构的演化,同时利用元素分析和傅里叶红外对颗粒化学结构进行分析。
2.Pore volume fractal dimensions of fly ash - cement paste at different ages and its pore volume fractal dimensions were determined by MIP(mercury intrusion porosimetry) on experiments.采用压汞法对不同龄期粉煤灰-水泥浆体的孔分形结构进行了实验研究,测定了复合浆体孔体积分形维数,探讨了孔体积分形维数与孔隙率,孔表面积、平均孔径、孔分布及宏观力学性能的关系。
3.In this study, the mercury intrusion porosimetry (MIP) tests were performed on the natural sedimentary diatomaceous soil to investigate the relationship between the change in entrance pore size distribution and the applied stress level.采用压汞法研究了不同固结压力作用下具有强结构性的天然沉积硅藻土的微观孔隙入口孔径分布与应力水平的关系。
5)mercury intrusion压汞法
1.In order to characterize quantitatively the microstructure of freeze-dried material, the computational method of surfacefractal dimentsion through mercury intrusion is introduced.研究表明:采用压汞法能够简便和合理地获得冻干物料的表面分形维数,可采用表面分形维数对冻干物料内部孔隙结构的粗糙和复杂程度特性进行定量描述;冻干物料的表面分维值主要与物料的孔隙分布特性有关,小孔的体积份额越大,物料的表面分形维数也越大。
2.In order to represent structure and shape of pores in freeze-dried materials quantitatively, based on mercury intrusion, two fractal models of porous media were employed to characterize pores in freeze-dried bovine muscle and cured beef.为了定量表征冷冻干燥物料孔隙结构和形貌特性,采用两种多孔介质分形模型,通过压汞法研究冻干牛肉和冻干腊牛肉孔隙结构的分形特性。
6)mercury porosimetry压汞法
1.Pore diameter in coal samples,its cubage and surface area at different temperatures and mercury press acting on the pores were measured by mercury porosimetry method.采用压汞法技术定量测定了在不同温度与压力下煤样的孔径、孔容积与煤的表面积的值;用分形理论对煤在定压变温条件下结构参数进行分形特征描述,并对用孔径与孔容两种分形维度的值表示煤的孔隙结构的合理性进行了比较。
2.Experiments were made using both nitrogen adsorption method (NAM) and mercury porosimetry method (MPM) to analyze the pore distribution o.实验分别使用氮气吸附法和压汞法对同一泥页岩进行孔径分析。
3.The characteristics of porous structure of expanded graphite(EG) were studied by using mercury porosimetry and image analysis.利用压汞法和图像分析法研究了膨胀石墨的孔结构,压汞法可测量膨胀石墨中微米量级以下的孔隙结构参数,对微米量级以上的孔可以利用图像分析法进行测量,膨胀石墨制备参数对膨胀石墨的孔结构有显著影响,其中插层电量越大孔径尺寸越大,孔径分布越宽;膨化温度越高,孔径尺寸越大,孔径分布也越宽。