1)multibioprocess复合生物工艺
1.The effect of micro-electrolysis of scrap iron and carbon with subsequential multibioprocess on the wastewater of a chemical plant which uses pharmaceutical and dye wastewater to produce sodium thiosulfate has been studied.研究铁炭微电解预处理与复合生物工艺对某一利用制药与染料工艺废水生产大苏打厂排放的高杂混合化工废水的处理效果。
2)bio-combined process生物复合工艺
1.The results show that increasing HRT can improve the removal efficiency of bio-combined process and 6h is the best HRT.试验中以哈尔滨市文昌污水处理厂原污水为试验原水,研究了HRT对生物复合工艺污染物去除效果的影响。
2.The results show that increasing the reflux ratio can improve the removal efficiency of bio-combined process.试验中以哈尔滨市文昌污水处理厂原污水为试验原水,研究了低温条件下污泥回流比对生物复合工艺污染物去除效果的影响。
英文短句/例句
1.Experimental Study on Treatment of Municipal Wastewater in Cold Region with Combined Biological Process;生物复合工艺处理寒冷地区城市污水试验研究
2.A Study on Fabrication of β-TCP/HAP Bioceramics and Its Properties;β-TCP/HAP复合生物陶瓷工艺研究
3.Experimental Research on Nitrogen and Phosphorus Removal with Biofilm-SBR Hybrid Process;生物膜-SBR复合工艺脱氮除磷试验研究
4.Process and Practical Application of Multi-ply Composite Biotreatment多段复合生物处理工艺及其应用实例
5.Studies on Purification Technology of the Integrated System of Membrane Bioreactor-Constructed Wetland;膜生物反应器—人工湿地复合系统净化工艺研究
6.Study on the scouring and bleaching process for linen rove with compound enzymes复合生物酶法煮练亚麻粗纱工艺的研究
7.Forming Technology of Bamboo Fiber Reinforced Biodegradable Plastic Composites生物可降解竹纤维增强塑料复合材料成型工艺
8.WORKING CHARACTERISTICS OF THE HYBRID BIOLOGICAL AERATED FILTER复合式曝气生物滤池工艺特性对比研究
9.Effect of Technologic Parameters on Phases of Bioceramic Coating Prepared by Laser Rapid Forming激光快速成形工艺参数对生物陶瓷复合涂层物相组成的影响
10.Study on Performance and Process Application of Hybrid-hydrolysis and Biofilter;“复合水解池－生物滤池”工艺的特性研究与工程实施
11.Application of A/O-MBR compound biological denitrification process to the wastewater treatment of synthetic ammoniaA/O-MBR复合生物脱氮工艺在合成氨废水处理中的应用
12.Optimized technology for aerobic fermentation of dairy manure to produce bioorganic fertilizer by inoculating compound microbes添加复合菌剂好氧发酵牛粪生产生物肥料的工艺优化
13.A Study on the Characteristics and Operational Performance of Hybrid Biofilm-Activated Sludge Process;活性污泥和生物膜复合工艺的特性及运行效能研究
14.Study on Micro-electrolysis, Fenton Reagent and Immobilized Microorganism Technique Combination Processes in Dyeing Wastewater Treatment;微电解-Fenton试剂—固定化生物技术复合工艺处理染料废水的试验研究
15.Study on Landfill Leachate Treatment by Biological Contact Oxidation and Electrocoagulation;生物接触氧化—电絮凝复合工艺处理垃圾渗滤液试验研究
16.Influence of Processing Factors on the Flexural Properties of C_((f))/HA-PMMA Bio-Composites工艺因素对C_((f))/HA-PMMA生物复合材料弯曲性能的影响
17.Preparation of the porous scaffolds of chitosan-gelatin/APTES modified bioglass壳聚糖-明胶/APTES改性生物活性玻璃复合支架的制备工艺
18.Application of Compound Biological Treatment Technology in Technical Renovation of Wastewater Treatment Plant复合生物处理工艺在污水处理厂技术改造中的应用
相关短句/例句
bio-combined process生物复合工艺
1.The results show that increasing HRT can improve the removal efficiency of bio-combined process and 6h is the best HRT.试验中以哈尔滨市文昌污水处理厂原污水为试验原水,研究了HRT对生物复合工艺污染物去除效果的影响。
2.The results show that increasing the reflux ratio can improve the removal efficiency of bio-combined process.试验中以哈尔滨市文昌污水处理厂原污水为试验原水,研究了低温条件下污泥回流比对生物复合工艺污染物去除效果的影响。
3)combined alternate-flow biological process复合式交替流生物工艺
4)A/O hybrid biofilm processA/O复合式生物膜工艺
1.A study on the anoxic phase of the A/O hybrid biofilm process was carried out intensively.对A/O复合式生物膜工艺的缺氧段进行了深入研究,并以物料平衡理论为基础,结合莫诺方程和Fick定律,建立了相应的底物降解和微生物增殖的动力学模型。
5)biofilm-Composite Technology电生物膜复合工艺
6)composite biotreatment process复合生物处理工艺
1.The theory of facultativepond and the composite biotreatment process which derive from facultativepond were introduced.简要介绍兼性塘的基本原理及由此衍生而来的复合生物处理工艺,由于采用多段串联设计,污染物在反复经历好氧、兼氧及厌氧环境的过程中得到去除,同时,产生的剩余污泥也被降解消化怠尽。
延伸阅读
高聚物基复合材料模压工艺高聚物基复合材料模压工艺compression molding of polymer matrix composites 高聚物基复合材料模压工艺。ompression mold-i眼of pol卿er matrix eomposites在封闭的模腔内，借助加热和压力固化成型复合材料制品的方法。是广泛使用的一种制造复合材料制品的工艺方法。用它制造的产品质量高，成本低，操作人员技能对产品质量影响不大。所用原材料极为广泛，但最适于使用片状模塑料的团状模塑料。 用模塑料成型制品时，装入模内的模塑料，由于与模具表面接触加热，粘度迅速减小，在3一7 MPa成型压力下，就可以平滑地流到模具的各个角落。模塑料遇热之后，迅速凝胶和固化。依据制品的尺寸和厚度，成型时间从几秒钟到几分钟。 模压工艺特别适用于制造大批量以及精度和重复性要求比较高的制品，如广泛用于生产家用制品、机壳、电子设备和办公室设备的外壳、卡车门和轿车仪表板等汽车部件，也用于制造连续纤维增强制品，但是纤维阻止了预浸料在模内的流动。这类材料主要用于生产壁厚不变、曲率比较小的部件。当生产批量为几千件以上时，一般使用钢模，或表面作适当处理的钢模。在生产批量比较少或产品开发阶段，模具也可以用高强度环氧树脂浇铸而成。(刘其贤)
