接触单元,contact element英语短句,例句大全

接触单元,contact element
1)contact element接触单元
1.Simulation studies on stability of slope with contact element;接触单元对边坡稳定分析影响的仿真研究
2.The computing model of adopting contact element to simulate the pile-soil’s reciprocity;引入接触单元模拟桩土共同作用
3.Automatic generation of 3D finite element mesh and contact elements for helical gears;斜齿轮三维有限元网格和接触单元的自动生成

英文短句/例句

1.A Mixed Element of Displacement and Force of Coulomb Friction Contact库仑摩擦接触问题的位移─力混合接触单元
2.(5) the impulse model, the dynamic contact model, the initialdisplacement model, ect.（3）接触单元法：（4）动接触力法：（5）冲量模型，动接触模型，初始位移法等。
3.Seismic Finite-Element Analysis of Buried Pipeline Based on Contact-Element基于接触单元的埋地管线有限元抗震分析
4.FEA of complex mechanism based on contact element method基于接触单元法的复杂机构有限元分析
5.Study on Contact Element in Geotechnical Simulation and Relative Parameters;岩土工程仿真中接触单元和相关参数研究
6.Additionally, the stressand displacement of contact element are analysed, and the contact condition between“soft adapter” and rockfill dam are studied.另外,还分析了接触单元的受力、变形情况,研究“软接头”与堆石坝之间的接触情况。
7.Application of Contact Element Method in Simulating Thermal Stress during Solidification of Casting接触单元在铸件铸造过程应力数值模拟中的应用
8.Secondly, the three nodes contact element obeying the elastic Coulomb friction constitutive model is presented.并介绍了服从弹性库仑摩擦本构模型的三结点接触单元。
9.Theory and Research of Frictional Contact Element on Concrete Diaphragm Wall in Earth-Rock Dam;土石坝防渗墙体与坝体间摩擦接触单元理论研究
10.2. EX PARTE CONTACTS（二）单方面接触。
11.Double-nodes Element & Contact Method for the Status Analysis of Dams with Cracks双节点单元和接触算法分析带缝大坝性态
12.Mechanical Behavior Analysis of Concrete-Rock System Using Interface Element采用接触面单元分析砼-岩系统的力学行为
13.Penalty Element and The 3-D Contact Interface Element Are Applied To The interaction of Pile Groups-Soil-Pile Cap;罚单元、接触元在承台-桩-土三者共同作用中的应用
14.Remark：When selecting braking unit, main contactor shall be choosen also.备注：选择制动单元时必须同时配上主接触器进行保护。
15.A Finite Element Approach for Axisymmetric Contact Problems and Its Application in Pile Foundation Engineering;轴对称接触问题的有限单元法及其在桩基工程中的应用
16.Sensitivity Analysis of Tangential Stiffness Coefficient for Contact Surface Element of Different Medium不同介质接触面单元切向劲度系数的敏感性分析
17.FRAME CONTACT LIFT (SINGLE POST)框架接触顶起点(单点)
18.The cone penetration process is numerically simulated by using the large-strain finite element method and a simple theory of interface.采用大变形有限元和简单的接触面理论,数值模拟了静力触探的探入过程.

相关短句/例句

contacting element接触单元
1.Using the Non-linear analysis technology of ANSYS software,the three-dimension finite element model of radial tyre of R15 type of 60 series is built with three-dimension volume element,layer element and contacting element.采用ANSYS软件非线性分析技术,通过三维体单元、层单元和接触单元,建立了60系列的R15型子午线轮胎的三维有限元模型。
2.The contacting simulative analytical model of a pair of herringbone gear used in warship was established,and let the result of calculation be compared with Hertz theory,therefore explained the accuracy,effectiveness and reliability of the contacting element on gear contact stress analysis.建立了一对舰用人字齿轮接触仿真分析模型,并将计算结果与赫兹理论比较,说明了接触单元在齿轮接触应力分析上的精确性、有效性和可靠性。
3)contact elements接触单元
1.Analysis on the vibration of Three Gorges hydropower house on the basis of double-node contact elements;基于接触单元的三峡电站厂房振动分析
2.Also,during the inverse calculating process,contact elements were used to simulate the longitudinal joints of the dam.根据混凝土重力坝坝顶水平位移观测资料,采用逐步回归方法分离出了坝顶水平位移的水压分量;以大坝和基岩的弹性模量识别反问题作为优化问题,利用改进的遗传算法,并借助接触单元模拟坝体纵缝进行了有限元反演分析。
4)interface element接触单元
1.Contacted interface elements are set between pile elements and soil elements.对苏州河河口水闸的整体设计作了简要介绍,采用空间Biot非线性固结有限元模型,考虑地基的固结过程,在有关位置设置软弱化接触单元,计算分析了挡潮和挡河两种工况下地基的变形对水闸结构的影响、闸墩和混凝土沉箱闸底板随时间变化的变形规律以及基础桩受力等共同作用问题。
2.In this paper a practical local mesh densification method, which can deal with the problems in the field of soil project FEM that usually includes interface element and multi-loads is given.针对土工有限元计算中,通常网格中包含接触单元,并且考虑多级加载的实际情况,文中给出了一种实用的网格局部加密算法,该算法简单实用,加密后的网格有较好的半带宽,并且合理解决了多级加载对网格编号的特殊要求。
3.A new three dimension nonlinear interface element for modeling joints is presented.提出了一种新的模拟结构缝或接触问题的三维非线性接触单元 ,在本构关系上 ,模型同时考虑了已被大量实验证实的接触面法向和切向的非线性特性 ,法向采用了考虑法向变形的双曲线模型 ,切向采用了考虑应变硬化的双曲线模型。
5)contact element method接触单元法
1.The interaction between the casting and core was disposed by using the contact element method in numerical simulation, which improved traditional method for disposing casting /model boundary conditions.模拟中采用接触单元法处理铸件与砂芯之间力的作用,改进了传统的铸件/铸型边界条件处理方法。
6)interface element接触面单元
1.Integration algorithm of constitutive equation for zero-thickness interface element and its verification;弹塑性无厚度接触面单元的本构积分算法及验证
2.The Goodman interface elements were defined to contribute a nonlinear numerical model for the coupling finite elements and interface elements.采用三维非线性有限元法进行单桩的工作性能分析,在桩土之间引入Goodman接触面单元,建立有限元—接触面单元相耦合的非线性数值模型。
3.The 3-D beam element was used for simulating the stressdeformation characteristics of concrete thin-walled cylindrical piles,and the thin layer interface element was used for simulating the interaction between soil and piles.用三维梁单元模拟混凝土薄壁筒桩的受力变形特征,用薄层接触面单元模拟桩与土体之间的相互作用,薄壁圆筒表面上的结点线位移用梁单元出口结点的线位移和转角位移表示,根据静力平衡条件提出了由接触面约束内力和桩上作用荷载求解桩体内力的计算公式,从而建立了桩土相互作用的有限元分析方法。