钴铁氧体,cobalt ferrite
1)cobalt ferrite钴铁氧体
1.Synthesis of cobalt ferrite nanoparticles and effect of doped lanthanum on magnetic properties of cobalt ferrite钴铁氧体纳米粒子制备及其镧掺杂的磁性能研究
2.In this paper, the developed history and representative methods of nanostructured ferrite were introduced, and Cobalt ferrite (CoFe2O4), Barium ferrite (BaFe12O19) and their La dopping system mostly was studied by Sol-Gel.本文介绍了铁氧体纳米粉体的发展历史和典型的制备方法,重点研究了在溶胶凝胶法制备钴铁氧体(CoFe2O4)、钡铁氧体(BaFe12O19)纳米粉体的过程中工艺条件对粒径及其均匀性等物理性能的影响,在此基础上制备了尖晶石型纳米级钴铁氧体、M型钡铁氧体及其掺镧(La)体系,并对它们进行了充分的表征。
3.Results show that cobalt ferrite thin films have spinel structure,and the Fe_3O_4 underlayer promotes the crystallization of cobalt ferrite film while decreasing the perpendicular anisotropy and the out-of-p.采用射频磁控溅射在基片 Si(100)和 Fe_3O_4 (20nm)/Si(100)上制备了钴铁氧体(CoFe_2O_4)薄膜,制备的薄膜在空气气氛中进行300~1000℃的退火处理,采用 XRD、VSM 分析了薄膜的微结构以及磁性能。
英文短句/例句

1.Properties of Mn-doped Cobalt Ferrite Prepared by Layered Precursors Method层状前体法制备锰掺杂钴铁氧体的性能
2.Controllable Fabrication of Cobalt Ferrtie magnetic Hollow Spheres and Studies on Their Applications钴铁氧体磁性空心球的可控制备及应用研究
3.Preparation and Magnetic Properties of CoFe_2O_4 Nanoparticles Doped by Rare Earth Ions稀土掺杂纳米钴铁氧体的制备及其磁性能研究
4.Preparation of Co-ferrite doped with Nd~(3+) from spent lithium ion batteries through hydrothermal method废旧锂离子电池水热法制备钕掺杂钴铁氧体
5.Studies on the Micro-structure and Magnetic Properties of Cr Substituted Co_xFe_(3-x)O_4 Ferrite Nanoparticles;掺杂钴铁氧体Co_xFe_(3-x)O_4纳米微晶结构与磁性研究
6.Study on Low-temperature Hydrothermal Synthesis and High-frequency Electromagnetic Properties of NiZnCo-ferrite镍锌钴铁氧体的水热低温合成与高频电磁性能研究
7.Synthesis of micron-tube and nanoparticles of Co/Fe spinel ferrite in hard template method硬模板法合成钴铁氧体微米磁管及磁性纳米粒子
8.Synthesis of cobalt ferrite nanoparticles and effect of doped lanthanum on magnetic properties of cobalt ferrite钴铁氧体纳米粒子制备及其镧掺杂的磁性能研究
9.Study on Temperature Dependence of Magnetomechanical Effect in Metal-bonded Cobalt Ferrite Composites Under Applied Torque扭矩作用下钴铁氧体粘型结复合材料中磁-机效应与温度的关系研究
10.Preparation and Microwave Absorbing Property of Cobalt and Nickel Ferrite Nanopowders纳米钴、镍铁氧体的制备与吸波性能
11.The preparation of the ultrananocrystalline of the alumina dopped nano zinc-cobalt ferrite超纳米态氧化铝掺杂钴锌铁氧体的制备
12.In order to improve the resistivity of oxidation, dysprosium cobalt ferrite magnetic fluids were prepared.为了提高磁流体的抗氧化能力,制备了镝钴铁氧磁流体。
13.Magnetic Properties of CoZnNi Ferrite Films via a Single-Source Precursor Route层状前体法制备钴锌镍铁氧体薄膜及其性能研究
14.Studies on Preparation and Microwave Absorption Properties of Cobalt-Based Metals Coated Strontium Ferrite Composite Powders;钴基金属包覆锶铁氧体复合粉末的制备和吸波性能研究
15.Preparation of Nano-barium Ferrite/CoNi Alloy Magnetic Coating by Composite Electrodeposition复合电沉积制备纳米钡铁氧体/钴镍合金磁性镀层
16.Preparation,Electromagnetic and Microwave Absorption Properties of Spinel Nanocrystalline Co-Zn Ferrite尖晶石型纳米晶钴锌铁氧体的制备及其电磁和微波吸收性能
17.Electrodeposition of Fe-Co Alloy from an Ionic Liquid离子液体电沉积铁钴合金工艺的研究
18.HYDROTHERMAL SYNTHESIS AND MAGNETIC PROPERTIES OF CoFe_2O_4 NANO-POWDER铁酸钴纳米粉体的水热合成及其性能
相关短句/例句

Co ferrite钴铁氧体
1.Firstly, Co ferrite nanoparticles were prepared with the method of solid-state reaction.首先采用低热固相法制备了球形磁性纳米粒子钴铁氧体
2.Firstly,Co ferrite nanoparticles were prepared with the method of solid-state reaction.采用低热固相反应法制备了球形磁性纳米粒子钴铁氧体;以钴铁氧体作为磁核,生物可降解材料壳聚糖作为骨架物质,制得了磁性壳聚糖微球。
3)vectolite['vekt?,lait]铁钴氧体
4)iron cobalt ferrite铁钴铁氧体
5)cobalt nickel ferrite钴镍铁氧体
6)zinc cobalt ferrites锌钴铁氧体
延伸阅读

含钴黄铁矿回收钴含钴黄铁矿回收钴recovery of cobalt from pyrite containing cobalt 鼻厂一,.…烹~(一,巴月郭宁 从含钻黄铁矿回收钳的流程含钻黄铁矿的工厂。该厂于1968年建成投产,1981年达到年产钻1500t。含钻黄铁矿的典型化学成分(%)是:Co 0.67,Ni 0.37,Cu 0.28,Fe 48.4,5 40.3。精矿先经氧化焙烧,再硫酸化焙烧,焙砂经过浸出、浓密、洗涤后,向浸出液通入硫化氢,钻便呈硫化钻沉淀。硫化钻先经加压浸出,接着用加压氮气还原法生产纯度大于99.8%的钻粉。全流程钻的总回收率约80%。 中国从含钻黄铁矿回收钻的硫酸化焙烧一段法工艺于1966年实现了工业化。此外,先氧化焙烧,焙砂配入含钻黄铁矿再进行硫酸化焙烧的二段法工艺也于1980年投入工业生产。这两种焙烧方法都能获得相当好的技术经济指标。 氧化焙烧一烧渣氮化培烧氯化焙烧根据原料的性质及下一步处理方法的不同可分为中温氯化焙烧和高温氯化焙烧(又称氯化挥发焙烧)。氯化剂可以是氯气,也可以用食盐、氯化钙等固体氯化剂。 中温氯化焙烧温度通常为 873~923K,不使拟提取的金属氯化物挥发出来。含钻黄铁矿首先进行氧化焙烧,所得烧渣再与一定量的氯化剂混合进行氯化焙烧,使钻、铜、镍等有价金属转变为可溶性盐,而铁仍呈不溶性氧化物状态存在。当焙砂用水或其他浸出剂浸出时,钻、镍、铜进入溶液,铁则残留于浸出渣中,从而达到钻、镍、铜等与铁分离的目的。焙烧过程中金属的氯化反应主要依靠食盐等氯化剂被二氧化硫和三氧化硫分解产生的氯化氢和原子氯,其化学反应如下:hongu huongtiekuang huish0U gu含钻黄铁矿回收钻(reeovery。f cobalt frompyrite containingeobalt)采用火法和湿法联合工艺将含钻黄铁矿中的钻与镍、铜等分离并制成钻产品的过程。德国杜依斯堡(D ulsburgor)铜厂是最先从含钻黄铁矿中提取钻的厂家。 含钻黄铁矿中的钻品位通常很低,但总量很大,是不容忽视的钻资源、含钻黄铁矿主要产于扎伊尔和赞比亚,中国钻储量的70写在黄铁矿中。含钻黄铁矿主要赋存于磁铁矿矽卡岩的高温矿床以及某些含铜黄铁矿型矿床中,由于钻替代了铁的硫化物中的铁离子而成为类质同象体,难于分选。含钻黄铁矿主要成分(%)为:Co 0.2一0.7,Ni 0.1一0.2,Cu 0.5一1.5,Fe.40一 55,5 30一35。 含钻黄铁矿经氧化焙烧脱硫之后称为烧渣。烧渣中的钻、镍、铜、铁主要呈氧化物状态存在。 从含钻黄铁矿及其烧渣中回收钻均采用火法与湿法相结合的冶炼工艺,一般经过焙烧、浸出、浸出液净化和钻产品制取等过程(见图)。