1)solid state sintering固相烧结
1.The history and recent development of solid state sintering theory of advanced ceramics are introduced systemically.系统介绍了陶瓷材料固相烧结理论的历史和研究进展,综述了用来描述烧结前期、中期和后期的烧结理论和烧结模型。
2.Based on the obtained results,the mechanisms of SiC solid state sintering and liquid phase sintering are discussed.回顾了 50年来SiC烧结领域研究所取得的成果 ,在这些成果的基础上 ,探讨了SiC固相烧结及液相烧结的烧结机理 ,并对不同烧结条件下 ,SiC烧结体的微观结构及物理化学性能进行了比较。
3.Aluminium titanate was synthesized from waste aluminum slag,which was a by-product of anodizing oxidation surface treating,and TiO_2 by solid state sintering method.用阳极氧化法处理铝型材产生的超细含铝废渣和TiO2为主要原料通过固相烧结合成钛酸铝结构材料,探讨V2O5添加剂对钛酸铝(Al2TiO5)的纯度及微观结构的影响。
英文短句/例句
1.Preparation, Structure, Photoluminescence and Electrical Resistivity of Solid Sintered Porous SiC;固相烧结多孔SiC的制备、结构、光致发光和电阻率
2.Effect of Polyethylene Glycol on the Properties of Silicon Carbide Ceramics不同含量PEG对固相烧结碳化硅陶瓷性能的影响
3.Research on preparation and properties of magnetic abrasive by conventional solid-state sintering method常压固相烧结法制备磁性磨料及其性能的研究
4.Raman Spectroscopic Study of Zr_(1-x)Hf_xW_2O_8 by Fast Solid State Reaction高温快速固相烧结合成Zr_(1-x)Hf_xW_2O_8的Raman光谱研究
5.Microstructures-evolution Observation of Boron Carbide Ceramic during Sintering Process by Synchrotron Radiation X-Ray Computed Tomography碳化硼固相烧结微观结构演化的同步辐射CT观测
6.Influence of Mechanical Alloying on Fe-Cu Compound Powders Solid State Sintering and Performance;机械合金化对Fe-Cu复合粉末固相烧结及性能的影响
7.Solid-state reaction synthesis and sintering of 2MgO·TiO_22MgO·TiO_2的固相反应合成与烧结
8.Gel Solid State Synthesis Technique for Producing Ultra-Fine Y-TZP Powder with Low Specific Surface Area and High Sintering Ability低比表面积高烧结活性Y-TZP超细粉体凝胶固相反应合成技术
9.miniature solid-sintered tantalum capacitor微小型固体烧结钽电容器
10.Research on the Technology of Fe-based Powder Compact Sintering-Solid Boronizing铁基粉末压坯烧结—固体渗硼技术研究
11.Research on Related Regulation between Sinter Bond-phase Microstructure and Sinter Quality;烧结矿粘结相的微观组织结构与烧结矿质量的相关规律研究
12.Influence of phase change of dispersed-phase particle in SRM chamber on throat insert erosion固体发动机燃烧室离散相颗粒相变对喉衬烧蚀的影响
13.Study on New Technology of Chromite Pellet Sintering and Agglomeration Mechanism;铬铁矿粉球团烧结新工艺及固结机理研究
14.Application of Cooled Agglomerated Pellet with Ferruginous Gas Mud in Sintering Process of Baotou Steel含铁尘泥冷固结球团在包钢烧结生产中的应用
15.Study of phase composition and microstructure of molybdenum +PCS sintering bodiesMo+PCS烧结体的相组成和组织结构研究
16.The Numerical Simulation of Gas-Solid Flow and Combustion in Chamber of Four Wall Tangentially-fired Pulverized Coal Boiler;四墙切圆煤粉燃烧室内湍流气固两相流动与燃烧数值模拟的研究
17.Fundamental Research of High-Temperature Phase Desulfurization during Coal Combustion;煤燃烧脱硫过程中高温物相固硫基础研究
18.Experimental Studies on High-Temperature Phase Desulfurization During Coal Combustion;煤燃烧过程中高温物相固硫的实验研究
相关短句/例句
solid phase sintering固相烧结
1.The carburising reaction of V to form VC take place under solid phase sintering at 850 ℃, and the in-situ synthesis VC particulate is fine, so the size is smaller than 0.讨论了烧结温度对VC颗粒大小和分布的影响,在850℃固相烧结时,钒的碳化反应能够完成,而且VC颗粒不易长大,原位生成小于0。
2.Pressureless sintering includes solid phase sintering and liquid phase sintering, which were both studied in the thesis, but the solid phase sintering was researched in detail.无压烧结技术包括固相烧结和液相烧结两种途径,本文对这两种工艺均进行了研究,并重点倾向于前者。
3.The results show that based on the carbon additives and the sinter temperatures,there are three kinds of sintering mechanisms:solid phase sintering,supersolidous liquid phase sintering and liquid phase sintering.结果表明,根据配碳量和烧结温度不同,存在固相烧结、超固相线液相烧结、液相烧结三种烧结方式,其碳化物尺寸分别为5μm、10μm、15μm左右;固相烧结试样相对密度和硬度只有90%和50HRC左右,而两种液相烧结试样的相对密度和硬度均可达99%和60HRC以上。
3)solid-phase sintering固相烧结
1.Using different grain grading α-Al2O3 as primary raw material,porous ceramic matrix was fabricated by solid-phase sintering in this paper.本文采用不同颗粒级配的α-Al2O3为骨料,以固相烧结法制备样品,采用扫描电镜分析试样的平均孔径;用真空法测显气孔率和吸水率;用机械拉力试验机测抗压强度。
2.The samples of Mn-Zn ferrite were prepared by solid-phase sintering method.采用固相烧结法制备Mn-Zn铁氧体样品,分别探讨了成型压力、预烧温度、烧结气氛、烧结温度对样品的致密性、相、结构及微结构的影响。
3.Using solid-phase sintering,superimposing different amounts ultra-fine tourmaline in diatomite porous ceramic, a new environmental material-diatomite-based porous functional ceramic was obtained.采用固相烧结法,在硅藻土基多孔陶瓷的配料里添加不同量的超细电气石粉,制备了一种新型环境材料-硅藻土基多孔功能陶瓷。
4)sintering['sint?ri?]固相烧结
1.Microstructure evolution of aluminum powder during sintering;铝粉固相烧结过程中的微结构演化
2.Microstructure-evolution of the silicon nitride ceramics sample during sintering process was in-vestigated by a synchrotron radiation X-ray computed tomography(SR-CT) technique.利用同步辐射CT(SR-CT)技术,在氮化硅陶瓷样品烧结过程中对其进行实时投影成像,并应用滤波反投影算法和数字图像处理技术,得到了样品在整个烧结过程中内部微结构演化的二维和三维重建图像,实现了对陶瓷固相烧结过程实时、无损的观测。
3.Microstructures-evolution of the boron carbide ceramic sample during sintering process was investigated by synchrotron radiation X-ray computed tomography(SR-CT) technique.利用同步辐射CT(SR-CT)技术,在碳化硼陶瓷样品烧结过程中对其进行实时投影成像,并应用滤波反投影算法和数字图像处理技术,得到了样品在整个烧结过程中内部微结构演化的二维和三维重建图像,实现了对陶瓷固相烧结过程实时、无损的观测。
5)solid-state sintering固相烧结
1.Moreover,a two-step solid-state sintering process of milled Ti/Al composite powders was investigated.并在此基础上,探讨了球磨Ti/Al复合粉的两步固相烧结工艺。
2.The metallic nitrides Mn_3(Cu_(1-x)Ge_x)N were prepared by solid-state sintering in the pure nitrogen atmosphere at 1073 K.在氮气保护下于1073 K用固相烧结法制备了Mn_3(Cu_(1-x)Ge_x)N化合物。
6)solid state sintered technology固相烧结法
1.Piezoelectric ceramic was fabricated by solid state sintered technology, and it was dispersed into PVDF polymer matrix homogeneously through solution mixing method to form PZN-PZT/PVDF 0-3 piezoelectric composites, then its properties were investigated.通过固相烧结法制备PZN-PZT压电陶瓷,采用溶液共混法将PZN-PZT陶瓷粉均匀分散于PVDF有机基体中,制备了PZN-PZT/PVDF 0-3型压电复合材料,测试并研究了材料的性能。
2.33 O 3] and their powders were fabricated using solid state sintered technology.采用固相烧结法合成了 PZN- PZT(铌锌锆钛酸铅 )三元系压电陶瓷烧结块材和粉末 ,并采用 XRD、SEM等测试方法对其结构和性能进行了分析。
延伸阅读
固相烧结solidstatesintering：在固态状态下进行的烧结。
