平均剪切速率,average shear rate英语短句,例句大全

平均剪切速率,average shear rate
1)average shear rate平均剪切速率
1.Compared with double helical ribbon impeller,the double helical ribbon and screw impeller can increase the average shear rate and average velocity in the stirred tank to some extent.0;搅拌雷诺数以及流体的流变指数对非牛顿流体搅拌流场的无因次速度、循环量数均有不同程度的影响;与双螺带搅拌桨相比,双螺带-螺杆搅拌桨能在一定程度上提高全槽平均剪切速率和平均速度。
2)shear averaging剪切平均
1.Then the moving target is focused by the shear averaging method once the information of the target s position is .该方法在运动目标具有方位向速度或距离向加速度时可获得比传统DPCA更好的检测效果,并通过剪切平均的方法实现运动目标的聚焦。
3)shear rate剪切速率
1.Study on relationship of viscosity and shear rate of potato starch size;马铃薯淀粉浆料的粘度与剪切速率关系的研究
2.Experimental investigation of the apparent viscosity and the shear rate of gelled propellant in straight round pipe;凝胶推进剂直圆管中剪切速率与表观粘性实验研究
3.Impact of shear rate on microstructure of PA 6/PP blends剪切速率对PA 6/PP共混物微观结构的影响

英文短句/例句

1.Studies on the Mechanics Behaviour of Joints under Different Shearing Velocity;不同剪切速率下节理的力学特性研究
2.Study on Melt Viscosity of PP and FEP/PP Blends at Low Shear RatesPP及FEP/PP低剪切速率下熔体粘性研究
3.Determination of viscosity of coatings at a high rate of shearGB/T9751-1988涂料在高剪切速率下粘度的测定
4.The apparent viscosity at the point decreases distinctly with shear rate increasing.随着剪切速率的增加,转相点的视粘度明显下降.
5.Effects of Shear Rate on Mechanical Behavior of Structured Loess剪切速率对结构性黄土力学性状的影响
6.Impact of shear rate on microstructure of PA 6/PP blends剪切速率对PA 6/PP共混物微观结构的影响
7.A STUDY OF RHEOLOGICAL PROPERTIES OF MOLTEN POLYETHYLENE TEREPHTHALATE--Part Ⅱ:Rheological Properties of PET Melt at High Shear Rate聚酯熔体流变性能的研究——高剪切速率下熔体的流变性能
8.INFLUENCE OF SILICA NANOPARTICLES ON THE COALESCENCE OF IMMISCIBLE PDMS/PIB BLENDS UNDER LOW-RATE SHEAR FLOW纳米SiO_2对PDMS/PIB不相容共混物在低剪切速率下凝聚行为的影响
9.Study on the Law of the Influence of Temperature and Shear Rate on Viscosity of Yanchang Crude Oil温度及剪切速率对延长原油粘度的影响规律研究
10.Research on the Rational Shearing Speed of High-speed Precision Shearing for Metal Bar金属棒料高速精密剪切适宜剪切速度的研究
11.Adiabatic Shear Bands of 4Cr5MoSiV1 Steel Formed by High Speed Cutting高速切削4Cr5MoSiV1钢形成的绝热剪切带
12.Formation mechanism and elimination of heavy sparks with the 3~# high-speed flying shear3号飞剪高速剪切大火花的成因及解决办法
13.Cause Analysis of Big Spark of Motor of Flying Shear at High Speed Cutting and Its Countermeasures飞剪高速剪切时大火花的成因及解决办法
14.The ratio of the magnitude of an applied shear stress to the velocity gradient that it produces; that is, a measure of a noncrystalline material's resistance to permanent deformation.剪切应力数值与其产生应变速率的比值叫粘性，用来衡量非晶材料抵抗永久变形的能力。
15.Research on spatial simulation method of soil equivalent shear wave velocity土层等效剪切波速空间模拟方法研究
16.The adiabatic shear bands of U-5.7Nb at high strain rate高应变率下U-5.7Nb合金的绝热剪切变形
17.Research on Rational Shearing Temperature of High Speed Precision Shearing for Bar under Clamping State基于夹紧状态的棒料高速精密剪切适宜剪切温度的研究
18.Effects of dynamic shear modulus ratio and velocity on surface ground motion and their equivalent relations动剪切模量比与剪切波速对地震动影响及等量关系研究

相关短句/例句

shear averaging剪切平均
1.Then the moving target is focused by the shear averaging method once the information of the target s position is .该方法在运动目标具有方位向速度或距离向加速度时可获得比传统DPCA更好的检测效果,并通过剪切平均的方法实现运动目标的聚焦。
3)shear rate剪切速率
1.Study on relationship of viscosity and shear rate of potato starch size;马铃薯淀粉浆料的粘度与剪切速率关系的研究
2.Experimental investigation of the apparent viscosity and the shear rate of gelled propellant in straight round pipe;凝胶推进剂直圆管中剪切速率与表观粘性实验研究
3.Impact of shear rate on microstructure of PA 6/PP blends剪切速率对PA 6/PP共混物微观结构的影响
4)shearing rate剪切速率
1.The experimental results show that the apparent viscosity of semi-solid A356 alloy increases with increasing the fraction solid, but decreases with increasing the shearing rate in the steady-state.结果表明：半固态A356合金的稳态表观粘度(η_a)随着固相分数(f_s)的增加而增加,但随剪切速率(γ)的增大而减小,当f_s达到某一临界值之后,η_a迅速增加,可用方程η_a=2。
2.The influence of molecular weight, shearing rate and temperature on the rheologic behavior of domestically manufacturing linear PPS (i.以国产线性聚苯硫醚树脂为原料,研究了分子质量、剪切速率、温度对PPS树脂流变行为的影响。
3.The diameter, flow, shearing rate ,draw ratio and pressure difference were calculated.讨论了"┃·"异形喷丝板的设计、纺丝工艺及后加工工艺,计算出喷丝板毛细孔的当量直径、单孔流量、剪切速率、喷丝头拉伸比,验证了喷丝孔的结构参数是影响可纺性的关键因素。
5)specific shear rate高速率剪切
1.The shear rate and temperature of the fluid in the wellbore and fracture is different,the depth of wellbore and the length of time that the fluid withstands specific shear rate are important to its final viscosity.液体在井筒和裂缝中的剪切速率与温度都是不同的,液体经历高速率剪切的时间长短不同,对液体的最终粘度造成的影响也不同,室内实验应考虑到井筒中高速率剪切对压裂液粘度的影响,模拟现场不同施工阶段进行液体性能评价,以便更真实地预测施工过程中液体粘度的变化,使液体满足现场施工要求。
6)high shear rate高剪切速率