1)disc[英][d?sk][美][d?sk]阀瓣
1.Siphon breaking valve which has single cavity body and double disc in structure;单腔双阀瓣式虹吸破坏阀
2.By analyzing the disc of 10 in.通过对双瓣止回阀阀瓣的有限元分析,介绍了有限元分析法在阀门强度和刚度分析方面的应用。
英文短句/例句
1.To reverse the seat disc, unscrew the disc screw and disassemble the disc washer and disc rubber from the disc holder assembly.为了翻转阀座阀瓣,则要拧松阀瓣螺丝,从阀瓣固定器总成拆解阀瓣垫圈和阀瓣橡胶。
2.Lift out the disc holder assembly from the body of the valve.从阀门的阀体内提起阀瓣固定器总成。
3.All valve seats and seat discs shall be replaceable.所有阀门阀座和阀座阀瓣应该是可更换的。
4.sprinkler alarm valve clapper喷水灭火系统报警阀阀瓣
5.Disc is guided by the mating surface of the seat.可通过所匹配的阀座表面导引阀瓣。
6.The disc is stem guided on all sizes.所有通径阀门的这种阀瓣是通过阀杆引导的。
7.Seat discs shall be reversible to extend check valve life.阀座阀瓣应该是双向的,能够延长止回阀寿命。
8.Optional disc configuration which provides line contact between spherical disc and conical body seat.备选阀瓣结构,在球形阀瓣和锥体阀座之间具有线接触作用。
9.In order to gain access to the seat and clapper rubber ring, you must compress the spring (#3) that surrounds the clapper shaft (#1).为了接近阀座和阀瓣橡胶环,必须压缩环绕阀瓣轴(1号)的弹簧(3号)。
10.The bottom of the disc is guided by the body seat ring for maximum disc stability in throttling applications.阀瓣底部由阀体阀座环引导,最大限度提高阀瓣在节流应用中的稳定性。
11.Kits include: Disc& Spring assembly, Cover O-ring and lubricant.组件包括:阀瓣和弹簧总成,阀盖O形环和润滑剂。
12.The Fig. 1710 Balancing valve is a non-rising stem design incorporating a parabolic (plug) shaped disc.型号1710平衡阀为暗杆结构,配置抛物线(塞)形阀瓣。
13.Theoretical and Experimental Research on Calibration of Slide Valve Membrane Sensor of Safety Valve安全阀阀瓣膜传感器标定的理论与实验研究
14.This prevents stem from scoring and galling and provides longer disc seal and body life.这种结构避免阀杆刮伤和磨损,延长阀瓣密封和阀体的使用寿命。
15.To clean; remove bottom plug, seat spring, strainer and seat disc.因此要清洗,拆卸底部塞、阀座弹簧、过滤器和阀座阀瓣。
16.Do not allow any pipe dope into valve body in order to avoid damage to disc and seat.不要让任何管道粘接剂流入阀体内,以避免损坏阀瓣和阀座。
17.Disc– machined seating surface is mated to seat ring for positive shutoff.(4) 阀瓣-机加工阀座表面,配置阀座环,实现积极有效的关闭。
18.Iron globe valves most commonly use semi-plug bronze disc/seat design.铸铁截止阀通常采用半插入式青铜阀瓣/阀座结构。
相关短句/例句
valve clack阀瓣
1.Different configurations of valve clack affecting the local flowing resistances in the regulator of ZVF;ZVF型调节阀中不同阀瓣型线对局部流阻的影响
3)flap valve瓣阀
1.The structural design of flap valve for natural circulation in CARR;CARR堆自然循环瓣阀的结构设计
4)clack[英][kl?k][美][kl?k]瓣,瓣阀
5)nuclear valve clack核阀阀瓣
6)butterfly valve蝶阀;瓣阀
延伸阅读
溢流阀、顺序阀、减压阀的比较
溢流阀
减压阀
顺序阀
控制油路的特点
通过调整弹簧的压力控制进油路的压力,保证进口压力恒定,p2=0
通过调整弹簧的压力控制出油口的压力,保证出口压力p2稳定
直控式-通过调定调压弹簧的压力控制进油路压力;夜控式-由单独油路控制压力
出油口情况
出油口与油箱相连
出油口与减压回路相连
出油口与工作回路相连
泄漏形式
内泄式
外泄式
内泄式
进油口状态及压力值
常态
常闭(原始状态)
常开(原始状态)
常闭(原始状态)
工作状态
进出油口相通,进油口压力为调整压力
进油口压力低于出油口压力,出油口压力稳定在调定值上
进出油口相通,进油口压力允许继续升高
联接方式
并联
串联
实现顺序动作式串联作卸荷阀用时并联
功用
定压、溢流或安全作用限压、稳压、保压
减压、稳压
不控制系统的压力,只利用系统的压力变化控制油路的通断
进油腔压力p1控制阀芯移动
出油腔压力p2控制阀芯移动
进油腔压力p1控制阀芯移动