软化性,Softness
1)Softness[英]['s?ftnis][美]['s?ftn?s]软化性
英文短句/例句

1.Softening resistance of CuCrZr alloy fabricated by equal channel angular pressing等径角挤压制备CuCrZr合金的抗软化性
2.Dynamic response of reinforced pavement considering softening of clay考虑软土软化特性的软基加筋道路动力响应
3.suppurative perichondritis of auricle化脓性耳郭软骨膜炎
4.hypophosphatemic osteomalacia低磷酸盐血性骨软化症
5.nutritional encephalomalacia雏鸡营养性脑软化病
6.having the property of softening or fusing when heated and of hardening and becoming rigid again when cooled.有软化或熔化的特性,当加热时变软、冷却时变硬。
7.Degradation of Soil Structure and Anisotropic Plasticity Evolution of Natural Clay;软粘土结构性、塑性各向异性及其演化
8.The cartilaginous cranium of an embryo before ossification.软骨颅胚胎在骨化作用之前的软骨性头颅
9.Study on dynamic stress-strain relationship of soft clay considering degradation of stiffness under cyclic loading考虑软化特性的软黏土动应力-应变关系研究
10.Analysis and FEM Stimulation of the Dilatancy and the Plastic Softening Deformation in Soft Rock Tunnel;软岩巷道围岩扩容—塑性软化变形及有限元分析
11.Cork Expansion Process and Analysis of Volatile Constituents in Cork Flooring软木膨化工艺及软木地板挥发性成分的研究
12.Cyclic-degradation-pore pressure generation model for anisotropic consolidated clay各向异性固结软粘土的循环软化-孔压模型
13.Analytic solution to deformation of soft rock tunnel considering dilatancy and plastic softening of rock mass考虑岩体扩容和塑性软化的软岩巷道变形解析
14.INTRINSIC TIME CONSTITUTIVE THEORY OF ROCK HARDEN AND SOFTEN CHARACTERISTICS岩石硬化及软化特性的内时本构理论
15.Humanization and Intelligentization:Future of Instructional Software;人性化与智能化——教育软件的未来
16.Modeling Variability in Software Product Family面向软件产品家族的变化性建模方法
17.testing method for vicat softening point of thermoplastics热塑性塑料软化点 (维卡) 试验方法
18.Improving the Performance of Software DSM Systems;软件分布式共享存储系统的性能优化
相关短句/例句

plastic softening塑性软化
1.Analytic solution to deformation of the rock tunnel considering the dilatancy and plastic softening of rock mass;隧道工程围岩扩容和塑性软化的变形解析
2.Analytic solution to deformation of soft rock tunnel considering dilatancy and plastic softening of rock mass考虑岩体扩容和塑性软化的软岩巷道变形解析
3.Based on the review of existing constitutive models of rock interfaces and joints, a nonlinear elasto-plastic softening constitutive model is developed by combining the nonlinear elastic model, the elasto-plastic model, and the degraded evolutionary equation where the degradation of the rock interfaces and joints is determined.在总结评述现有岩体结构面本构模型的基础上,将非线性弹性模型和弹塑性模型结合起来,并采用起伏角磨损演化方程来定量描述结构面的磨损软化,建立了岩体结构面非线性弹性-塑性软化本构模型。
3)softening[英]['s?fn][美]['s?fn?]软化性能
1.Experimental studies on rock softening properties in Danjiangkou Reservoir area;丹江口水库区岩石软化性能试验研究
4)softening behavior软化特性
1.Computation and analysis on bearing capacity of foundation with strain-softening behavior;考虑材料软化特性的地基承载力分析计算
2.In order to study the dynamic response of reinforced pavement on soft clay under traffic loading,cyclic triaxial tests were conducted to investigate the effects of initial deviator stress and load cycles on the softening behavior of clay.结果表明,软土的软化特性对软基加筋道路的动力响应有重要影响。
5)linear softening线性软化
1.The paper derives a very simple size effect formula based on the rupture condition of fictitious crack model of linear softening materials under complex loads.根据线性软化材料在复杂荷载作用下的虚裂纹模型的开裂条件,导出了一个非常简单的尺寸效应公式,进而导出了一个在复杂荷载下预测混凝土构件抗拉强度的新公式,并广泛地收集试验结果与理论结果相比较,结果表明,对普通混凝土的线性软化方程是能满足它的断裂强度因子的。
6)soften temper性情软化
延伸阅读

荷重还原软化性荷重还原软化性softening property under load during reduction hezhong huonyuan ruanhuaxjng荷重还原软化性(softening property underload during reduetion)铁犷石在荷重和升温还原条件下发生软化收缩的特性。铁矿石被加热还原生成大量FeO,它容易与矿石中510:、CaO、A12O3等脉石矿物形成低熔点的液相。随着温度的升高,液相数量增加。当升高到一定温度后,矿石在荷重条件下开始变形、收缩、软化。继续升温,则继续软化收缩,直至熔化滴落。在高炉炼铁过程中,从软化开始发生熔滴,即在炉内形成了软熔带。软熔带中的透气性差,还原和传热过程受到限制。因此,要求软熔带薄一些,位置低一些。软熔带的厚度和位置同矿石的软化性在高炉内和熔滴性有直接关系。矿石的软化温度高、软化温度区间窄,则高炉内的软熔带薄,在炉内位置低,透气性好,所以矿石的荷重还原软化性是评价铁矿石高温冶金性能的主要指标之一。不同矿石具有不同的荷重还原软化性,并可用专门的装置测定。 测试方法20世纪60年代以前,研究矿石软化性的方法是取一定数量和粒度的矿石置于增涡中,试样上加一定的荷重,在一定升温速度下加热,测定其收缩率同温度的关系。用软化开始温度和软化区间为评价矿石软化性的指标。但是,测试温度不超过1200℃,试验气氛和试样还原程度不予控制,升温制度和荷重的控制也无统一的规范,装置的自动化水平较低。到6。年代,出现了一些新的测试装置和方法。为了控制试样的还原程度,先将试样预还原到不同的还原度,然后在N:气氛下进行加热,测定不同温度下的收缩率,以比较不同矿石的软化性。为了测定矿石在软化收缩时的透气性和还原性的变化,研制了一种荷重还原透气性测定装置。但是,这种装置由于使用耐热金属反应管,测试温度只能达到1050一1100℃,而且测定是在恒温下进行。为使测试条件同高炉内相近,采用了程序升温和在高温下通入NZ+CO混合气,用高A12O3管代替金属管,使测试温度可提高到1350一140。℃。 评价指标评价矿石荷重软化性有3项指标:(1)软化开始温度。表示软化开始的判据、无统一规定,一般以开始收缩时的温度或收缩率为4%或10%时的温度为软化开始温度。(2)软化终了温度。也无统一的判据。20%和25%收缩率曾被用作软化终了的判据,后来改为40%的收缩率。一般认为,软化终了即为熔化开始,由于铁矿石是一个含多种氧化物的复杂体系,不存在明确的熔化温度,只有一个温度区间,所以熔化开始温度常以通过试样层的气流压差陡升时的温度来表示。(3)软化区间。即软化终了温度和软化开始温度之间的温度差。温差大表示软化区间长,软熔带的透气性不好。