K形节点,K-joint英语短句,例句大全

K形节点,K-joint
1)K-jointK形节点
2)overlap K-jointsK形搭接节点
1.It is really difficult to solder the hidden weld of overlap K-joints.针对K形搭接节点内隐藏焊缝不易施焊的现实状况,为了弥补现有规范设计公式统一按内隐藏焊缝全焊考虑而可能带来的安全隐患,用有限元手段分析比较了内隐藏焊缝不焊对节点破坏模式、受力性能等的影响。

英文短句/例句

1.Research on the Structure Behavior and Ultimate Capacity Design of Overlap Tubular K-Joints;圆钢管结构K形搭接节点受力性能及设计方法研究
2.Research on Strength of Welds in Overlaped RHS K(N)-joints;矩形管K（N）型搭接节点焊缝计算研究
3.RESEARCH ON FORCED PERFORMANCE AND ULTIMATE CAPACITY OF OVERLAPPED TUBULAR K-JOINTK形圆钢管搭接节点受力特点及极限承载力分析研究
4.Research on Static Behaviour of Unstiffened Overlapped Circular Hollow Section K-Joints;平面K型圆钢管搭接节点静力性能研究
5.The Nonlinear Analysis on the Steel Tubular Lap K-joint Ultimate Bearing Capacity;K型钢管搭接节点极限承载力的非线性分析
6.Nonlinear Finite Element Analysis of Overlap Tubular K-Joints Made of Square Chord and Circular BracesK型方圆钢管搭接相贯节点非线性有限元分析
7.Nonlinear finite element analysis of72 overlap tubular K-joints and18 zero-gap K-joints is carried out.对72个K型圆钢管搭接节点和18个零间隙节点进行了非线性有限元分析。
8.Static Behaviour of Overlapped KT-Type SHS Joints;直接焊接KT型搭接方管节点静力性能的研究
9.Experimental study on ultimate bearing capacity of CFST directly-welded K-joints钢管混凝土K形相贯节点极限承载力试验研究
10.Axial Force Calculation Model of Circular Hollow Steel Member in Truss with Overlapped Unstiffened Joints搭接节点圆钢管桁架结构轴力计算模型
11.Improved design formulae for the ultimate capacity of unstiffened overlapped CHS joints圆钢管搭接节点极限承载力计算公式的改进
12.Finite Element Analysis on Static Behavior of Directly Welded K-Type and KK-Type Chs-Joints直接焊接K型、KK型圆钢管节点静力性能的有限元分析
13.Parametric Analysis and Design of the Ultimate Strength of Tube-gusset Plate ConnectionsK型钢管—板连接节点受力性能与极限承载力研究
14.EXPERIMENTAL STUDY OF STRESS CONCENTRATION FACTOR FOR COMPLETELY OVERLAPPED K-JOINTS完全叠接K型管节点的应力集中系数的试验研究
15.It was finally known from energy consumption analysis of joints that, generally speaking, all specimens possessed good capability of energy consumption.由搭接节点耗能分析可知，总体看来各试件具有良好的耗能能力。
16.Research on the In-Plan Effective Length Factor of Brace in SHS Truss with Overlap Joints;采用搭接节点的方管桁架支杆平面内计算长度系数研究
17.The Static Property Research of Non-overlapping Spatial KK-joints with Vertical Bars加竖杆的空间KK型圆管无搭接节点的静力性能研究
18.Use this shape to connect nodes in a node tree diagram.使用此形状可在节点树图表中连接节点。

相关短句/例句

overlap K-jointsK形搭接节点
1.It is really difficult to solder the hidden weld of overlap K-joints.针对K形搭接节点内隐藏焊缝不易施焊的现实状况,为了弥补现有规范设计公式统一按内隐藏焊缝全焊考虑而可能带来的安全隐患,用有限元手段分析比较了内隐藏焊缝不焊对节点破坏模式、受力性能等的影响。
3)K-jointsK型节点
1.As one of the most fundamental joint configurations in tubular structures, The ultimate capacity of planer gap tubular K-joints is insufficient sometimes, which limit the project application of steel tube-truss.然而,在实际工程中K型节点的极限承载力有时不足,限制了钢管结构在工程上的应用。
2.Thus, an analytical parametric study was conducted to investgate the behavior of uniplanar K-joints and multiplanar KK-joints.在此基础上,通过变参数分析考查了平面K型和空间KK型节点受力性能和节点破坏模式,研究了几何参数、主管应力比η、加劲构造等因素对节点受力性能和极限承载力的影响规律;同时,对于KK型节点,还考虑考虑了腹杆加载比例P2/P1的影响。
4)K-jointK型节点
1.Study on Collision Behavior of K-joint in Offshore Jacket Platform;海洋导管架平台K型节点碰撞性能研究
2.Experiment on Force Performance of Concrete-filled Rectangular Steel Tube K-joints;矩形钢管混凝土K型节点受力性能试验
5)single K-joint单K节点
1.Experimental research on single K-joint in roof truss with welded box section members used in the National Stadium;国家体育场焊接方管桁架单K节点试验研究
6)CHS overlapped K-jointK形圆钢管搭接节点
1.In this paper,the length of welds at CHS overlapped K-joint is studied.以K形圆钢管搭接节点的相贯线焊缝长度为对象,首先推导出搭接节点三条相贯线的空间方程,然后给出了这三条焊缝的精确MATLAB程序化计算方法,最后考虑实际工程的需要提出了节点焊缝长度的简化计算公式。