1)MnSi20MnSi
1.The model of static recrystallization of 20MnSi steel and its application in hot continuous rolling of bars;20MnSi钢静态再结晶模型及其在棒材热连轧中的应用
2.The practice of production 460MPa reinforced bar by remained heat treated 20MnSi;20MnSi轧后余热处理生产460MPa英标钢筋实践
20MnSi steel20MnSi钢
1.Effect of annealing temperature on microstructure of 20MnSi steel processed by equal channel angular pressing;退火温度对20MnSi钢ECAP变形组织的影响
2.20MnSi steel was successfully processed by equal channel angular pressing(ECAP) of four passes with route C at room temperature,and the influences of ECAP pass on microstructures and mechanical properties were examined.采用C方式等径弯曲通道变形(Equal Channel Angular Pressing,简称ECAP)对20MnSi钢进行了4道次室温变形,研究了变形道次对显微组织和力学性能的影响。
3.The effects of Nb on the austenization and static recrystallization behavior of 20MnSi steel are investigatedThe grain growth behavior is researched through austenite grain growth experimentsThe heat simulation experiments on static recrystallization are carried out with the Gleeble-1500 machineThe influence rules of Nb on 20MnSi steel static recrystallization are obtained研究了微合金元素铌对20MnSi钢奥氏体化和静态再结晶的影响规律,得出了铌对20MnSi钢奥氏体晶粒长大行为的影响规律。
3)20MnSi bars20MnSi钢筋
1.This paper analyses the cause of early fracture of 20MnSi bars in tensile test by the methods of metallographic and scanning electron microscopes.采用金相和扫描电镜等手段分析了20MnSi钢筋在力学性能检验中出现早期断裂的原因。
4)MnSi steel bar20MnSi棒材
5)20MnSi reinforced bar20MnSi螺纹钢
1.The bending strength of 20MnSi reinforced bar were measured, the effect factors were analysed, and the measures to improve proposed.对20MnSi螺纹钢冷弯性能进行测试,分析其影响因素,并提出了改善螺纹钢冷弯性能的措施。
6)MnSi screw-thread reinforcement20MnSi螺纹钢筋
延伸阅读
MnSi_(2)~χ中的调制结构MnSi_(2)~χ中的调制结构 —M—nSi 2～，中的询制结构 中岛科学院仓璃矸究所供稿
