1)austenitic stainless steel奥氏体不锈钢
1.Research on intergranular atuack of Fe-17Mn-13Cr-0.3N austenitic stainless steel;Fe-17Mn-13Cr-0.3N奥氏体不锈钢的晶间腐蚀研究
2.Effect of Magnetic Field of the Pulse on the Quenched Structure of Austenitic Stainless Steel;脉冲磁场对奥氏体不锈钢液淬组织的影响
3.Chemical cleaning of austenitic stainless steel and passivation;奥氏体不锈钢设备的化学清洗和钝化
英文短句/例句
1.Krupp austenitic steel克虏伯奥氏体不锈钢
2.Boronizing of ZG1Cr18Ni9 austenite stainless steelZG1Cr18Ni9奥氏体不锈钢的渗硼
3.Study on Active Screen Plasma Nitriding of Austenitic Stainless Steel;奥氏体不锈钢活性屏离子渗氮的研究
4.Study on Wear and Corrosion Properties of New Type Austenitic Stainless Steel;新型奥氏体不锈钢磨损、腐蚀性能研究
5.Strain Hardening of Cryogenic Vessels from Austenitic Stainless Steels;应变强化奥氏体不锈钢低温容器研究
6.Study on Stress Corrosion Cracking of Austenite Stainless Steel Bellows;奥氏体不锈钢波纹管的应力腐蚀研究
7.A Study on the Welding Technology of the Aoshi 18-8 Typed Stainless Steel;18-8型奥氏体不锈钢焊接工艺研究
8.Study on Fatigue Properties of a New Type Austenitic Stainless Steel 24Mn18Cr3Ni0.62N奥氏体不锈钢24Mn18Cr3Ni0.62N疲劳性能的研究
9.Welding and Properties of Cr15Mn9Ni1N Austenitic Stainless Steel Welded JointsCr15Mn9Ni1N奥氏体不锈钢的焊接及接头性能
10.Effect of Hydrogen on Mechanical Properties of 304L Austenitic Stainless Steel氢对304L奥氏体不锈钢力学性能的影响
11.Continuously Casting Practice of N08904 Super Austenitic Stainless SteelN08904超级奥氏体不锈钢的连铸实践
12.Constitutive characteristic of hot deformation for Cr15Mn9Cu2Ni1N austenitic stainless steelCr15Mn9Cu2Ni1N奥氏体不锈钢的热变形本构特性
13.Corrosion Behavior of Plasma Carburfzed Coating on Austenite Stainless Steel奥氏体不锈钢离子渗碳后的腐蚀行为
14.Analysis on fatigue fracture of high nitrogen austenitic stainless steel at room temperature高氮奥氏体不锈钢室温疲劳断口分析
15.Discussion on Cutting of Austenite Stainless Steel 1Cr18Ni9Ti奥氏体不锈钢1Cr18Ni9Ti的机械加工探讨
16.Numerical Simulation of Grain Growth in Nb-Alloyed Austenitic Stainless Steel含铌奥氏体不锈钢晶粒长大数值模拟
17.The Study on the Solid Solution Nitriding of the Austenitic Stainless Steel and Its Bonding with Carbon Steel;奥氏体不锈钢固溶渗氮及与碳钢复合的研究
18.The MN Test Evaluate the Biocompatibility of AUSI and Fe Stainless Steels;微核实验评价奥氏体不锈钢与铁素体不锈钢的生物相容性
相关短句/例句
austenite stainless steel奥氏体不锈钢
1.Effect of Breakdown Process on Surface Cracking of Billet of Free Cutting Austenite Stainless Steel;开坯工艺对易切削奥氏体不锈钢坯表面开裂的影响
2.Development of High Nitrogen Austenite Stainless Steel 1Mn15Cr17Ni2N;1Mn15Cr17Ni2N高氮奥氏体不锈钢的研制
3.Effect of aging treatment on corrosive wear characteristics of σ strengthening austenite stainless steel;时效处理对σ相强化奥氏体不锈钢腐蚀磨损特性的影响
3)austenitic stainless steels奥氏体不锈钢
1.High nitrogen low-nickel austenitic stainless steels are a new type of stainless steels which can ac- quire the stable austenite by using nitrogen element as a substitute for nickel element.高氮低镍奥氏体不锈钢是一种以氮代镍来获得稳定奥氏体组织的新钢种,它不但可以提高不锈钢的综合性能、节约镍资源,而且可以解决含镍较高的不锈钢用于人体时造成的镍过敏问题,在生物医学领域应用潜力巨大。
2.Results show that with the concentration of nitrogen increasing, the ductile property at low temperature decreases rapidly while the DBTT increases, which are at 140 K and 210 K respectively; one feature of brittle fracture is peeled off layers in high nitrogen austenitic stainless steels when impacted at 83 K.对Fe 24Mn 13Cr 1Ni 0 44N和Fe 24Mn 18Cr 3Ni 0 62N两种高氮奥氏体不锈钢分别进行了低温冲击断裂的试验研究 研究结果表明:随着氮的质量分数的提高,奥氏体不锈钢的低温冲击韧度快速降低,韧脆转变温度升高,两者的韧脆转变温度分别为140K和210K;高氮奥氏体不锈钢在83K时会产生层状剥离式的脆性断裂;高氮奥氏体不锈钢随温度的降低,断裂模式的变化规律为:拉长或等轴形韧窝→浅坑形韧窝→脆断刻面和韧窝混合型→脆断刻面为主,层状剥离出
3.By using the equipment of dynamic tensile and SEM, the microstructures of two kinds of high nitrogen austenitic stainless steels are observed.利用动态拉伸台和SEM对两种高氮奥氏体不锈钢进行了动态拉伸的微观形貌原位观察 实验表明滑移和孪生在高氮奥氏体中同时存在;随着形变量的增加,晶粒内部的滑移线加宽,逐步成为微裂纹;而晶界的结合力较强,没有观察到沿晶断裂;氮的加入会产生固溶强化和间隙强化,增大点阵滑移的阻力,从而降低奥氏体不锈钢的塑性 随着氮含量的增加,试样的延伸率降
4)stainless steel奥氏体不锈钢
1.Behavior of an austenitic stainless steel in simulated PEMFC environment;一种奥氏体不锈钢在模拟PEMFC环境中的特性
2.The specimens were taken from forged 0Cr19Ni9N stainless steel which was industrially produced.从工业化生产的 0Cr19Ni9N奥氏体不锈钢大锻件实物中取样 ,研究了粗大原始组织的高温再结晶。
3.This paper deals with the structure of carbochromized austenite stainless steels by TEM and X-ray diffraction techniques.采用透射电镜和Ｘ射线衍射技术研究了奥氏体不锈钢碳铬共渗层的组织结构。
5)austenitic steel奥氏体不锈钢
1.The tests on the micro structure and mechanical performance of Incoloy 800H alloy which has been in high-temperature and high-pressure environment service of H_2-presence for 100,000 hours and comparison of the test results with characteristics of hydrogen induced cracking of austenitic steel ha.文章通过试验研究了高温高压临氢环境下、服役约100 kh的Incoloy 800H合金钢的微观组织和力学性能,并将试验结果与氢致奥氏体不锈钢损伤典型特征比较,发现长期服役在高温高压临氢工况下,氢致Incoloy 800H力学性能下降和微观组织损伤轻微,即Incoloy 800H合金钢抗氢损伤性能优良。
2.When the austenitic steel head is formed by cold spinning, some austenitic structure is turned to martensitic steel in the cold forming process.奥氏体不锈钢封头旋压成型后,部分奥氏体组织因冷变形转化为马氏体,与材料中残留的部分α组织共同导致封头呈磁性,采用热处理等方法可以消除磁性。
6)SUS301 austenite stainless steelSUS301奥氏体不锈钢
延伸阅读
奥氏体不锈钢分子式：CAS号：性质：在常温下具有奥氏体组织的不锈钢。含铬18%和镍8%的不锈钢是最典型的奥氏体不锈钢，它常被称为18-8不锈钢。这种不锈钢在很宽的温度范围内都具有很高的强韧性，富于延展性，容易轧制和压缩等冷加工，它的耐蚀性和耐酸性，都优于铁素体不锈钢和马氏体不锈钢。添加钼和铜的镍铬系奥氏体不锈钢具有更好的耐蚀性和耐酸性，而且耐盐酸和卤化物腐蚀性也大为改善。除铬镍系奥氏体不锈钢之外，还有铬镍锰系以及不含镍和铬的铁锰铝系奥氏体不锈钢。由于奥氏体不锈钢具有全面、良好的综合性能，在工业上获得了广泛应用。
