1)cross wedge rolling楔横轧
1.Numerical simulation on cross wedge rolling of shaft parts with eccentric section;偏心圆截面轴类零件的楔横轧成形数值模拟
2.Method of codification and retrieval for products of cross wedge rolling;楔横轧轧件的编码与匹配方法
3.Research on simulating manufacture of numerical control milling for cross wedge rolling tool;楔横轧模具数控铣削仿真加工研究
英文短句/例句
1.Forming principle of heavy section shrinkage cross wedge rolling by single wedge楔横轧一次楔大断面收缩率成形机理
2.Analysis of factors affecting rolling force in rolling zone of eccentric shafts with cross wedge rolling偏心轴楔横轧轧制区轧制力影响因素分析
3.Technological Experimental Research for Cross Wedge Rolling Technology of Pin Valve of Oil Pump油泵油嘴针阀体楔横轧工艺试验研究
4.Simulation and analysis of camshaft’s precise forming by flat-type cross wedge rolling凸轮轴板式楔横轧精确成形过程仿真
5.The system for 3D-moding of cross wedge rolling die based on STL基于STL的楔横轧模具三维建模系统
6.Simulation and Experimental Study on Rolling Worm Shaft in Cross Wedge Rolling and Cross Rolling楔横轧与横轧组合轧制蜗杆轴的数值模拟与实验研究
7.Study on Accurate Shaping Curve of Inside Right-angle Step of Cross Wedge Rolling楔横轧内直角台阶精确轧齐曲线的研究
8.Study on the influence law of the rolling curve affected by rolling radius during cam shaft cross wedge rolling楔横轧凸轮轴轧制半径对辊形曲线影响的规律
9.Research on material flow trait during cross wedge rolling process楔横轧变形过程中轧件内部金属流动的规律
10.Study on the quality effect of rolled piece internal part in two rolls cross wedge rolling by J.T.S methodJ.T.S法对改善二辊楔横轧轧件心部质量的研究
11.The Mathematic Model of Workpiece Deformation Region of Cross Wedge Rolling楔横轧轧件变形区几何形状的数学模型
12.Analysis on rolling stability of heavy section shrinkage cross wedge rolling大断面收缩率楔横轧稳定轧制问题分析
13.Analysis of Factors Affecting Instantaneous Speed Ratio between Workpiece and Roller of CWR楔横轧轴类零件轧件与轧辊瞬时速比影响因素分析
14.THE CALCULATION OF PRECISE EVEN CURVE OFVERTICAL STEP IN CROSS WEDGE ROLLING楔横轧成形直角台阶精确截齐曲线的计算
15.Mathematical model of the shaping process of inside right-angle step on cross wedge rolling楔横轧内直角台阶成形过程的数学模型
16.The Research on Facility and Technique of Forming Connecting-rod Billet in Cross Wedge Rolling Processing;连杆坯料楔横轧成形的设备与工艺研究
17.Finite Element Simulation and Analysis of Shaft Deformation by Cross Wedge Rolling;楔横轧阶梯轴成形过程的有限元仿真与分析
18.Research on Cross Wedge Rolling of Cone-shaped Shaft Parts Based on Numerical Simulation基于数值模拟的锥形轴类件楔横轧成形研究
相关短句/例句
CWR楔横轧
1.By using FEM(finite element method),the influences of t he model-parameters and the division of cross section reduced ratio on the interio r defects have been researched during the CWR(cross wedge rolling)process wit h two work steps, and the process design of two kinds of shafts used in one car ’s gear-box is improved.利用有限元数值模拟研究了楔横轧工艺参数及二次轧制中不同变形量分配对轧件内部空心缺陷的影响,并对某汽车变速箱一轴和二轴的成形工艺进行了改进设计,对改进前后所得到的楔横轧轧件进行超声波探伤和低倍组织实验研究。
2.Reasonable choice of roller diameter is a key techonology of Cross Wedge Rolling(CWR)forming large-sized shafts.合理选择轧辊直径是楔横轧成形大型轴类件的重要技术指标,采用ANSYS/LS-DYNA有限元分析软件,对楔横轧轧制大型轴类件进行模拟,分析轧辊直径对楔横轧大型轴类件应力应变影响规律,阐明轧辊直径对于楔横轧大型轴类件轧件质量的影响程度,研究结果为实现大型轴类件楔横轧经济化生产提供理论依据。
3.The application of this technology in process and die design for cross wedge rolling (CWR) will promote the technical development and technology transfer of CWR.在楔横轧工艺开发和模具设计中应用CAD／CAE／CAM技术，有利于促进楔横轧工艺的发展和推广应用。
3)Multi-wedge cross wedge rolling楔横轧多楔
1.Equal diameter axis formed in Multi-wedge cross wedge rolling(MCWR)was numerically simulated and analyzed utilizing the finite element method(FEM)software ANSYS/LS-DYNA.利用有限元软件ANSYS/LS-DYNA,对楔横轧多楔成形等直径轴进行了数值模拟与分析。
4)MCWR多楔楔横轧
5)wedge rolling楔形横轧
1.Design and calculation of wedge rolling die for aluminum alloy connecting rod pretreated blank;铝合金连杆预制件楔形横轧模具的设计计算
6)warm cross wedge rolling温楔横轧
1.Evolution of pearlite microstructure during warm cross wedge rolling;高碳钢中珠光体在温楔横轧过程中的组织演变
延伸阅读
楔横轧crosswedgerolling：带有楔形模具的两个（或三个）轧辊，以相同的方向旋转，棒料在它的作用下反向旋转的轧制称为楔横轧。
