1)arc voltage电弧电压
1.The controlling research of arc voltage of shielded metal arc welding;手工电弧焊电弧电压控制的研究
2.Effect of arc voltage on arc stability of MIG welding;电弧电压对混合气体保护焊电弧稳定性的影响
3.Study on analyzing droplet transfer characterization by arc voltage fluctuation value;电弧电压变化量分析熔滴过渡特征的研究
2)arc pressure电弧压力
1.High-frequency pulse modulated variable polarity welding power and its arc pressure;高频脉冲变极性焊接电源及电弧压力分析
2.Analysis of twin-electrode TIG coupled arc pressure;双钨极氩弧焊耦合电弧压力分析
3.The results indicate that the T-TIG welding can avoid the defects of undercut and humping effectively in high current and high speed region on the basis of low arc pressure.与常规钨极氩弧焊的对比分析表明,由于双钨极氩弧焊降低了电弧压力,提高了焊丝的熔敷率,因而在大电流高速度焊接时,极大地减少了凹坑、咬边等缺陷,实现了良好的焊缝成形,从而改善了常规钨极氩弧焊不适合大电流高速度焊接的不足,拓宽了钨极氩弧焊的使用范围,提高了焊接生产率。
英文短句/例句
1.Analysis of different welding conditions on variable polarity plasma arc pressure变极性等离子电弧压力的影响因素分析
2.low idle voltage arc-welding power supply低空载电压的弧焊电源
3.Synthesis of carbon nanotubes at different pressure by arc discharge and its characterization不同压力下碳纳米管的电弧法合成及其表征(英文)
4.Objection to “Elimination of Arcing Ground Over-voltage” by Arc Quenching Coil对消弧线圈“消除弧光接地过电压”的异议
5.Research and Simulation on Ground Arc Over-voltage of Wuhai Power System;乌海电网弧光接地过电压研究与仿真
6.Research on the Algorithms of Edge Detection on the Image of Apparatus Arc;低压电器电弧图像边缘检测算法研究
7.Secondary Arc Spectrum Characteristics on EHV Transmission Lines超高压输电线路的潜供电弧频谱特性
8.Research on low voltage electrical apparatus switching arc's image gathering and enhancement低压电器开关电弧的图像采集与增强
9.Arc Ignition and Arc Extinguishing in Power Circuit Breaker电力开关中电弧的产生机理及其灭弧措施
10.Research on arc erosion of AgMeO contact with low voltage resistive load and small current at 50Hz and 400Hz50Hz和400Hz低压阻性小电流电弧对AgMeO触头电弧侵蚀的研究
11.Arc welding transformer against electric shock deviceGB/T10235-1988弧焊变压器防触电装置
12.The Research of Welding Arc Physical Characteristic in Hyperbaric TIG Welding;干式高压TIG焊接电弧物理特性的研究
13.Study of CrAlN Film Deposited by Pulsed Bias Arc Ion Plating;脉冲偏压电弧离子镀CrAlN薄膜性能研究
14.Fundamentals of Pulsed Bias Arc Ion Plating;脉冲偏压电弧离子镀的工艺基础研究
15.The Measurement of Disturbance Voltage and Radiated Emission for Arc Welding Equipment弧焊设备骚扰电压和辐射发射的测量
16.Simulation of PF arc grounding over-voltage based on MODELS基于MODELS的工频弧光接地过电压的仿真
17.Improvement of Hydraulic System for ZH-3000 Vacuum Consumable Electro-arc FurnaceZH-3000真空自耗电弧炉液压系统改进
18.Comparison of secondary arc extinction methods for UHV transmission lines特高压线路熄灭潜供电弧的方法比较
相关短句/例句
arc pressure电弧压力
1.High-frequency pulse modulated variable polarity welding power and its arc pressure;高频脉冲变极性焊接电源及电弧压力分析
2.Analysis of twin-electrode TIG coupled arc pressure;双钨极氩弧焊耦合电弧压力分析
3.The results indicate that the T-TIG welding can avoid the defects of undercut and humping effectively in high current and high speed region on the basis of low arc pressure.与常规钨极氩弧焊的对比分析表明,由于双钨极氩弧焊降低了电弧压力,提高了焊丝的熔敷率,因而在大电流高速度焊接时,极大地减少了凹坑、咬边等缺陷,实现了良好的焊缝成形,从而改善了常规钨极氩弧焊不适合大电流高速度焊接的不足,拓宽了钨极氩弧焊的使用范围,提高了焊接生产率。
3)arcing voltage起弧电压
1.In order to solve the problem of high energy consumption in the process,the factors which affect arcing voltage of micro-arc oxidation on aluminum alloy were studied.针对目前微弧氧化技术中存在的电能消耗高的问题,对影响铝合金微弧氧化起弧电压的因素进行了研究,分析溶液成分和含量、工艺条件等因素对起弧电压的影响。
2.The influences of concentration of NaOH on the arcing voltages,characteristics of spark spot of the sample in microarc oxidation,the rate of c.通过改变NaOH的浓度研究其对微弧氧化的临界起弧电压、微弧氧化过程中试样表面火花形态、陶瓷膜的生长速率及陶瓷膜厚度的影响。
4)arc voltage弧电压
1.The torch can bring higher arc voltage with lower fluctuation by elongating the arc.该喷枪能够提高电弧电压并减小电弧电压波动。
5)arc starting voltage启弧电压
6)Arc extinction by voltage电压消弧
延伸阅读
标准操作冲击电压波形(见冲击电压发生器)标准操作冲击电压波形(见冲击电压发生器)standard switching impulse voltage waveform b .oozhun CooZuo ChongJld，onyo boxlng标准操作冲击电压波形(standard switchingimpulse voltage waveform)见冲击电压发生器。
