1)transformation induced plasticity相变诱发塑性
1.The elongation of the steel can be enhanced considerably due to strain induced martensite transformation and transformation induced plasticity (TRIP) when it is deformed at a temperature between M s and M d.该钢在 Ms~ Md 温度之间形变 ,应变诱导相变 ,相变诱发塑性 (TRIP) ,其力学性能指标特别是伸长率大幅度提高。
2.The steels show high strength as well as comprehensive plasticity because of strain induced phase transformation and transformation induced plasticity (TRIP) happened in the retained austenite in the steels.在不含Cr,Ni的SiMn结构钢中,因残余奥氏体的应变诱导相变和相变诱发塑性,可得到良好的强度与塑性配合的综合性能·通过对二种成分SiMnTRIP钢力学性能的比较及其组织分析,探讨了TRIP效应提高结构钢力学性能的机理·结果表明,含有一定Mn合金元素的TRIP结构钢,当Si含量小于20%时,含Si量愈高,其力学性能愈好
3.When the steel changed in form between M s and M d,its tensibility enhanced considerably due to strain induced martensite transformations and transformation induced plasticity (TRIP) of retained austenite.该钢在MsMd温度之间形变时,因残留奥氏体的应变诱导马氏体相变和相变诱发塑性TRIP,延伸率大幅度提高。
英文短句/例句
1.Strain Hardening Exponent Calculating Model for Transformation Induced Plasticity Steels相变诱发塑性钢的应变硬化指数计算模型
2.Microstructure and Properties of 800 MPa Cold Rolled TRIP Steel800MPa级冷轧相变诱发塑性钢的组织与性能
3.Effect of Annealing in Two-phase Region on Microstructure and Mechanical Properties of TRIP Steels两相区退火对相变诱发塑性钢显微组织与力学性能的影响
4.Study on the Microstructure and Properties of Low Carbon Low Silicon TRIP Steel Containing Vanadium;含钒低碳低硅相变诱发塑性钢的组织和性能的研究
5.Microstructure Control of Hot Rolled C-Si-Mn TRIP Steel Based on Dynamic Transformation of Undercooled Austenite基于动态相变的C-Si-Mn系热轧相变诱导塑性钢
6.Microstructure and Mechanical Properties of Fe24Mn0.5C TWIP SteelFe24Mn0.5C形变孪晶诱发塑性钢的显微组织和力学性能
7.Rheological and Phase Transition Properties of Thermoplastic Starch Under the Plasticization of Glycerol甘油增塑热塑性淀粉的流变相变性质
8.An Experimental Study about the Correlation between Hippocampal Plasticity and Epileptogenesis of the Temporal Lobe Epilepsy;颞叶癫痫发生与海马可塑性改变的相关性研究
9.Study on New High Strength and Super High Strength TRIP Steels;高强度和超高强度相变塑性钢的开发和研究
10.Study of Twinning Induced Plasticity with Addition of Nitrogen or Niobium;氮、铌合金化孪生诱发塑性(TWIP)钢的研究
11.Indentation-induced Plasticity,Damage and Fracture in Si and GaAs Single Crystals压痕诱发GaAs和Si晶体塑性、损伤与断裂
12.Interaction of UV Radiation with Temperature and Influence of It on the Ethanol Production-enhancing Mutation in Yeast;酵母紫外线诱变后培养温度与酒精发酵性状变异相关性研究
13.Relationship of P300,Electroencephalography,Apoprotein B and myelinopathy脑白质变性与诱发电位P300、脑电图、血浆载脂蛋白B的相关性研究
14.Fracture Mechanism of Fe-24Mn-0.5C TWIP Steel under Dynamic Conditon动态条件下Fe-24Mn-0.5C孪晶诱发塑性钢的断裂机制
15.The relation analysis between VEP change and visual acuity recovery about 30 eyes after contusion眼挫伤30例视力的恢复与视觉诱发电位变化相关性的分析
16.Deformation of steel ingot with liquid core during rolling belongs to deformation of two-phase (solid and liquid)is a new domain of plastic deformation.液芯轧制的变形属于两相(固相、液相)变形,是塑性变形的新领域。
17.THE SEISMOGENIC MODEL OF SECOND-ORDER PHASE TRANSITION OF WATER FOR RESERVOIR INDUCED EARTHQUAKES水库诱发地震的水二级相变孕震模型
18.FATIGUE PROPERTIES OF LOW CARBON LOW SILICON TRIP STEEL相变塑性钢的低周疲劳性能和裂纹扩展速率
相关短句/例句
transformation-induced plasticity相变诱发塑性
1.Strain-induced transformation and transformation-induced plasticity behavior of retained austenite was discussed through observing the microstructures and examining the mechanical properties of both steels.通过显微组织观察,力学性能分析,探讨了两种钢的应变诱导相变和相变诱发塑性行为。
2.The behaviour of TRIP (transformation-induced plasticity) effect was discussed through observing microstructure, analyzing fracture morphology and comparing it with the mechanical properties of high-Si TRIP steels.无硅TRIP钢采用临界区加热等温淬火热处理,获得铁素体,贝氏体及大量稳定残余奥氏体的三相组织·通过对其显微组织观察,断口形貌分析,与高硅TRIP钢力学性能的相互比较,探讨了无硅TRIP钢相变诱发塑性的行为·结果表明:无硅TRIP钢在拉伸变形过程中,应变诱导相变,相变诱发塑性;其拉伸断口形貌呈韧性断口特征;经790℃加热在400℃等温5min时,抗拉强度达到754MPa,延伸率达到36%,综合性能(强塑积)达到27144MPa%的最高值
3.The behaviour of transformation-induced plasticity were discussed through observing the microstructure, and analyzing the mechanical properties of TRIP steel replacing Si by Al.通过对其显微组织观察、力学性能分析,探讨了以A1代Si的TRIP钢的相变诱发塑性的行为。
3)TRIP[英][tr?p][美][tr?p]相变诱发塑性
1.68Mn (mass%) TRIP steel have been investigated at room temperature.6×10-6s-1时,高碳硅锰TRIP钢伸长率由14%~15%提高到22%左右;屈服强度由1015MPa提高到1198MPa;抗拉强度由1448MPa提高到1546MPa;拉伸试样中残留奥氏体量减少,这表明在低应变速率下应变诱导相变、相变诱发塑性能充分进行。
4)TRIP steel相变诱发塑性钢
1.The FLD and mechanical properties under high speed impact for low carbon TRIP steel were studied.对抗拉强度600 MPa级的低碳相变诱发塑性钢(TRIP钢)进行了拉伸、成形、高速冲击拉伸和激光焊接试验。
5)transformation induced plasticity (TRIP)相变诱发塑性(TRIP)
6)transformation induced plasticity (TRIP)steel相变诱发塑性TRIP钢
延伸阅读
λ相变分子式:CAS号:性质:低温时,液态氦(4He)有两个不同的液相,He-I和He-II。He-I是一个正常液体,而He-II是一个超流体,因为它流动时没有黏度。He-I和He-II之间的相转变是连续性相变,也称λ相变。
