1)Fe-Ni alloyFe-Ni合金
1.Under different temperature and reactants concentration,Fe-Ni alloy whisker is prepared in a solution of mixed ferrous and nickelous salt,using KBH4 as a reducing agent and polyethylene glycol as a dispersant agent.采用液相还原法通过在不同反应温度和反应物浓度条件下,以KBH4为还原剂,在二价铁、镍盐的水溶液中加入适量的表面活性剂还原出晶须状的Fe-Ni合金。
2.Based on the mechanism of LSP inducing residual stress field, in this paper, the residual stress field of Fe-Ni alloy was simulated and then experimental research was made on LSP of Fe-Ni alloy.本文从激光冲击波诱导残余应力场的机理出发,对激光冲击强化Fe-Ni合金残余应力场进行了数值模拟,并对Fe-Ni合金进行了激光冲击强化的试验研究,主要取得了如下研究成果:阐述了激光冲击波的形成机制,分析了约束模式下的Fabbro模型及其修正模型,根据弹塑性动力学、冲击波理论,探讨了激光冲击波的传播机理和材料在一维应变压缩下的本构关系。
3.Based on the classical nucleation theory and the time-dependent nucleation theory, the thermodynamics and the kinetics for the competitive nucleation of the metastable 8 and the stable phases y have been calculated, the critical condition that the metastable phase appeared in Fe-Ni alloy was brought forward.采用BCT模型分析了过冷熔体中晶体的生长方式以及凝固组织的演化规律,借助经典形核理论和瞬态形核理论详细讨论了过冷Fe-Ni合金的合金中亚稳相δ与稳定相γ竞争形核的热力学及动力学机制,提出了过冷Fe-Ni合金中形成亚稳相的临界条件。
英文短句/例句
1.Solidification Microstructures and Magnetic Properties of Undercooled Fe-Ni Alloys;深过冷Fe-Ni合金的凝固组织与磁性能
2.Study of Carbusintering Process of Fe-Ni Alloy Powder Materials;Fe-Ni合金粉末材料渗碳烧结的研究
3.The Mechanical Alloying of Fe-Ni-Al and Fe-Ni-Ce Systems;Fe-Ni-Al和Fe-Ni-Ce三元合金的机械合金化研究
4.Studies on Technology and Basic Mechanism of Plating Ni-Fe、Ni-Fe-Cr Alloy Foil and Ni-Cr Alloy;Ni-Fe、Ni-Fe-Cr合金箔及Ni-Cr合金电沉积工艺和基础理论研究
5.The Studies of Structure and Properties of Electrodeposited Nano Fe-Ni Alloys and Amorphous Fe-Ni-W Alloys;电沉积Fe-Ni纳米合金与非晶态Fe-Ni-W合金结构及性能研究
6.Studies on Brazing Diamond with Ni-Fe Filler Metal;Ni-Fe二元系合金钎焊金刚石的研究
7.Design and Preparation of Fe-Ni Soft Magnetic Alloy Absorbing Materials;Fe-Ni软磁合金吸波材料的设计与制备
8.Study on the Elongation of W-Ni-Fe Heavy Tungsten Alloys;W-Ni-Fe高密度合金的延伸率研究
9.Study on the Properties of Fe-Mn-Si-Cr-Ni-C Shape Memory Alloy;Fe-Mn-Si-Cr-Ni-C形状记忆合金性能研究
10.The Study on High Damping Mn-Cu-Ni-Fe Alloy;高性能Mn-Cu-Ni-Fe阻尼合金的研究
11.Microstructure Characterization and Magnetic Propertie of Ni-Fe Alloy Coating;Ni-Fe合金镀层的结构表征与磁性能
12.Research on Nanocrystalline WC-8(Fe、Co、Ni)RE Cemented Carbide;纳米WC-8（Fe、Co、Ni）RE硬质合金研究
13.The Effect of Y Addition on the Properties of Fe-Ni Amorphous Alloys;Y添加对Fe-Ni基非晶合金的性能影响
14.Study on Low-Carbon Fe-W(Mo)-Co(Ni) Alloys;低碳Fe-W(Mo)-Co(Ni)合金研究
15.Martensitic Transformation of Ni-Fe-Ga Magnetic Shape Memory AlloyNi-Fe-Ga磁性形状记忆合金马氏体相变
16.Studies on Phase Interface Reaction of Fe-Ni-Ti Ternary SystemFe-Ni-Ti三元合金体系相界面反应研究
17.The electrodeposition process and property of nanocrystalline Ni-Fe alloys纳米晶Ni-Fe合金电沉积工艺及性能
18.CO_2 Corrosion Resistance of Fe-Cr-Ni-Mo Alloy 27-7MoFe-Cr-Ni-Mo合金27-7Mo的抗CO_2腐蚀性能
相关短句/例句
Fe Ni alloyFe-Ni合金
3)Ni-Fe alloyNi-Fe合金
1.Electrochemical behaviors of Ni-Fe alloy codeposition;Ni-Fe合金共沉积的电化学行为
2.Progress of Ni-Fe alloy plating;Ni-Fe合金电镀的研究进展
3.Corrosion resistance and destruct process of Ni-Fe alloy coatings by electrodeposition were studied by weight loss,anodic polarization curve and EIS techniques.本文采用失重、阳极极化和电化学阻抗谱等方法研究了电沉积Ni-Fe合金镀层腐蚀性能和镀层的破坏过程。
4)Fe-Ni-Al alloyFe-Ni-Al合金
1.Oxidation behavior of Fe-Ni-Al alloy at 900 ℃;Fe-Ni-Al合金在900℃时的氧化行为研究
5)Ni-Fe-P alloyNi-Fe-P合金
1.Ni-Fe-P alloy has been electrolessly deposited from a alkaline bath containing boric acid as a buffer agent and sodium citrate as a complexing agent.以硼酸为缓冲剂,柠檬酸钠为络合剂,在弱碱性体系中化学沉积Ni-Fe-P合金。
6)Fe-Ni-Cr alloyFe-Ni-Cr合金
1.Electrochemical behaviors of electrodepositing Fe2+,Ni2+,Cr3+ solely and Fe-Ni-Cr alloy have been studied by linear potential scan and cyclic voltammetry and the alloy plating were characterized by means of SEM and XRD in this study.利用线性电势扫描法和循环伏安法分别讨论了配位剂对Fe2+、Ni2+、Cr3+单独电沉积和Fe-Ni-Cr合金共沉积电化学行为的影响,并采用SEM和XRD技术对合金镀层表面形貌和结构进行了表征。
2.Fe-Ni-Cr alloy electrodepositing experiment on iron substrate in chlorid-sulfate solution by barrel plating was performed.在氯化物-硫酸盐混合体系中,在铁基上进行滚镀Fe-Ni-Cr合金实验,结果表明:滚镀所得的Fe-Ni-Cr合金镀层铬的含量只有2%左右,难以提高,且镀层表面质量不佳,常出现滚桶眼子印现象。
3.The progress of Fe-Ni-Cr alloy plating is summarized.概述电镀Fe-Ni-Cr合金的发展进程,从电沉积Fe-Ni-Cr合金的基本条件、镀液体系、电镀的类型以及镀层晶体结构类型等几个方面对电镀Fe-Ni-Cr合金的特点进行阐述。
延伸阅读
W-Ni-Fe alloy分子式：CAS号：性质：一类重要的钨基重合金。它们是在钨中添加镍、铁而组成的合金，以及在这个基础上再加入其他金属元素的合金。加入的镍铁比一般为7：3或1：1。这类合金应用极广，已经成为用量最大的主要钨基重合金。其特点是烧结密度高，强度与塑性均较好，有一定的铁磁性。合金作为一般应用，如配重、平衡锤、防辐射屏蔽装置等，都直接使用烧结合金；但如作为要求高机械性能的应用时，合金则需变形加工及热处理以达到强化。
