carbide network网状碳化物
1.Effect of Water Cooling Process after Continuous Rolling on Carbide Network ofΦ60 mm Rod of GCr15 Bearing Steel;连轧后水冷工艺对GCr15轴承钢Φ60 mm棒材网状碳化物的影响
2.A technology combining ultra-fast cooling with slow cooling after high temperature finishing rolling was created against the serious precipitation of carbide network.针对国内某钢厂连轧生产线上出现的网状碳化物严重析出问题,提出高温终轧后超快速冷却与缓冷相配合技术,在精轧机后安装超快速冷却器,对60 mm棒材高温终轧后超快速冷却到一定温度后缓冷,从而抑制了网状碳化物的析出,使过冷奥氏体完全发生伪共析转变而得到细片层间距的珠光体型组织-索氏体,并促进珠光体形核减小珠光体球团直径,减小C原子扩散能力细化了珠光体片层间距,得到了利于球化退火的理想组织。
3)spheroidal carbide球状碳化物
1.It was found that there was a large amount of spheroidal carbide in the microstructure after normalizing or forging,which is quite different from the traditional technique for carbide spheroidizing of high.采用作者研究发明的新型球化剂,对超高碳钢钢水孕育处理,使铸态获得球状石墨的球墨铸钢;并分析了球墨铸钢铸态、退火、正火、锻造后的组织特征,同时观察到球墨铸钢正火、锻造处理可获得大量的球状碳化物现象,与传统的高碳钢碳化物球状工艺有显著的差异。
4)spherical carbide球状碳化物
1.The results show that the spheroidization effect is better and better with the increasing of drawing deformation magnitude,the uniformity and roundness of spherical carbide are improved obviously;the annealing effect is not obvious after larger .结果显示:随着拉拔量的增加,其球化效果越来越好,球粒状碳化物的均匀性和圆整度有了明显改善;较大拉拔塑性变形后钢丝进行球化退火,其退火效果变化不明显,球状碳化物的均匀性和圆整度已经稳定。
5)sheet carbide片状碳化物
6)zonal carbonide带状碳化物
延伸阅读
平面网状聚合物分子式：CAS号：性质：如果线型高分子链只沿着二维方向进行交联，则形成立体交联，则形成平面网状结构。实际上，交联一般总是沿三维方向运行，而形成立体交联结构。但用特殊方法合成的梯形高分子则具有平面网状结构。
