1)hardened layer硬化层
1.Constructions controlling the cracking on waterproofing concrete roof and hardened layer;防水混凝土屋面及硬化层施工裂缝控制
2.The results show that when the thickness of hardened layer is 0.为了确定钛合金表面扩散焊接轴承钢硬化层的合适厚度,利用先进的纳米显微力学探针测量了材料的弹性模量。
3.Being a kind of integrated structural parts,different thickness of Ni hardened layer has great effect on distribution of internal stress and dimensional stability.作为一种整体结构件,在实际应用中镍硬化层的厚度对部件的内应力分布以及尺寸稳定性有着重要的影响。
英文短句/例句
1.and with constant working current,the lower scanning speed,the deeper harden layer depth and the higher hardness.工作电流不变,扫描速度越低,硬化层深度越深、硬度越高。
2.Study of Nodular Cast Iron's Laser Hardened Layer and Its Wear Resistance;球墨铸铁的激光硬化层及其耐磨性的研究
3.Properties of 45 carbon steel hardened by micro-plasma微弧等离子45钢表面淬火硬化层性能分析
4.The Initial Gastrointestinal Perfusion Research in Cirrhosis by Multi-slice CT;肝硬化胃肠多层螺旋CT灌注初步研究
5.A Study of Micro-hardness of Fe-Zn Alloy Obtained by Electroless Plating化学镀Fe-Zn镀层的显微硬度实验研究
6.Esophageal motility problems can occur in patients with progressive systemic sclerosis (scleroderma) because the submucosa becomes fibrotic.系统性硬化（硬皮病）病人食管蠕动障碍，因为黏膜下层纤维化。
7.The 16-slices Spiral CT Study of Liver Volume and Hepatic Perfusion in Liver Cirrhosis;肝硬化体积与血流灌注变化的16层螺旋CT研究
8.The lack of deep hardening in these alloys negates their use.这些合金缺乏深层硬化能力使它们无法利用。
9.Study on Technology of Hard and Thick Top-coal Weakening in Fully Mechanized Caving Faces in Binchang Mining District;彬长坚硬厚煤层综放开采顶煤弱化技术研究
10.The Renal Perfusion Change in Cirrhosis Assessed by MSCT;多层螺旋CT对肝硬化患者肾脏血流灌注研究
11.Perfusion Research of Pulmonary Microvascular by MSCT in Patients of Hepatic Cirrhosis;肝硬化患者肺微循环多层螺旋CT灌注研究
12.Effects of Different Atmospheres on The Thickness And Hardness of Strenghened Coating;环境介质对脉冲放电强化层厚度和硬度的影响
13.Fragility of Hard Anodized Film of Al and Its alloys and Countemeasures;铝及铝合金硬质阳极氧化膜层的脆性及其对策
14.Study on Impregnated Diamond Bit's Optimal Design for Hard Formation适合坚硬地层孕镶金刚石钻头优化设计研究
15.The Study of Atherosclerotic Plaques by 64-slice CT Coronary Artery Angiography64层螺旋CT冠状动脉粥样硬化斑块研究
16.Influence of Paratoluene Sulphonic Acid-hardened Furan Resin Sand on the Surface Layer Microstructure of Nodular Iron Castings磺酸硬化呋喃树脂砂对球铁件表层组织的影响
17.Position Solving of Nonlinearity Harden Stress Neutrosphere at Wide Plate Bending宽板弯曲时非线性硬化应力中性层位置的求解
18.Micro Hardness Analysis for Micro-arc Oxidation(MAO) Films on AZ91D Die-casting Magnesium AlloyAZ91D压铸镁合金微弧氧化膜层的显微硬度分析
相关短句/例句
hardening layer硬化层
1.The microstructure and property of remelting hardening layer at different paramenters was analyzed by scanning electron microscope and microhardeness sclerometer and abrasion test-machine and salt-mist test-machine.利用扫描电镜、显微硬度计、磨损试验机和盐雾试验机研究了不同工艺下熔凝硬化层显微组织及性能。
2.The relation between the processing parameters and the size of hardening layer the micro-hardness is investigated.研究了40Cr钢表面激光淬火工艺参数与硬化层尺寸以及显微硬度的关系,分析了激光硬化层的显微组织。
3.The Al concentration distribution in aluminized layer,microstructure and some properties of surface hardening layer were studied.研究了渗层的铝浓度分布，硬化层的显微特性及有关性能。
3)hardened case硬化层
1.Based on the three-dimensions transient temperature distribution model, the paper analyzes the effects of different combination of laser power and scanning velocity on the hardened case's uniformity.以三维瞬态温度场分布模型为基础 ,对激光相变硬化中不同激光功率和扫描速度组合对硬化层分布均匀性的影响进行了理论研究。
2.According to the uniformity of the hardened case, the technique of using curved rectangular beam in laser hardening is put forward.针对改善激光硬化层均匀性问题,提出了采用曲边矩形光斑进行激光淬火的方法,并对该光斑扫描作用下工件内的温度场及硬化层进行理论模拟。
3.According to the feature of the temperature distribution induced by laser scanning, the simple formulas for the fast calculation of the hardened case are set up.根据激光扫描时工件内温度场及硬化层的分布特征 ,提出了简便实用的硬化层预测计算公式。
4)hardened-depth硬化层深
1.Nondestructive testing of metal hardened-depth is an important problem to be solved in machinery industry.金属表面硬化层深的检测一直是机械工业部门急需解决的问题，涡流法作为一种无损检测方法相较于以往的破坏性检测有更高的可靠性和经济效益。
5)depth of hardening硬化深层
6)depth of hardened layer硬化层深度
1.When the grinding parameters are constant, the depth of hardened layer and.结果表明:硬化层完全硬化区均由细小的孪晶马氏体和板条马氏体组成,且硬化层的组织形貌及显微硬度无显著变化,但硬化层略粗马氏体相的出现位置有所差异;在磨削用量恒定时,顺磨硬化层的深度以及最大残余压应力均大于逆磨硬化层;在磨削功率恒定时,采用逆磨方式可以获得更深的硬化层;与干磨相比,湿磨硬化层表面残余压应力有所提高,但其硬化层深度减少了约30%。
延伸阅读
硬化分子式：分子量：CAS号：性质：见变定。
