1)alloy coating合金涂层
1.Based on the technology of Co-B and Co-P alloys nanocrystalline coatings, the ternary Co-Ni-B and Co-Ni-P nanocrystalline alloy coatings were obtained, and the deposit rate and microstructure of ternary nanocrystalline alloys were investigated.在化学沉积钴硼、钴磷合金纳米晶涂层制备工艺的基础上,制备了钴镍硼、钴镍磷纳米晶合金涂层,研究了三元纳米晶合金的沉积速率和显微组织结构。
2.Results showed that satisfactory alloyed layer could be also formed on steel castings without adding fusing agent into alloy coating.研究表明,合金涂层中不加熔剂也能形成质量较好的合金层;铸型中合金膏块相对厚度是决定铸件表面合金层厚度的主要因素;浇注温度提高,合金颗粒适当增大,有利于增加合金层厚度;铸钢合金层的耐激冷激热性能好。
3.The Ni-based alloy coating and Ni-clad WC ceramic coating were prepared and characterized by abrasive wear resistance test.对镍基合金涂层和Ni/WC陶瓷涂层进行耐磨实验,结果表明:两种涂层存在不同的磨损特性,WC陶瓷颗粒在涂层及其表面的均匀分布可提高涂层的耐磨性,硬度和韧性的相互匹配是提高材料耐磨性的有效方法。
英文短句/例句
1.Thermal spraying--Self-fluxing alloy coatingsGB/T16744-1997热喷涂自熔合金涂层
2.The Study and Application of NiCr Coating by Arc-spraying;电弧喷涂NiCr合金涂层的研究与应用
3.Development of Cold Gas Dynamic Sprayed Al-Pb Alloy Coatings;冷气动力喷涂Al-Pb合金涂层的研究
4.Laser Cladding of Cu-Zr-Al Alloy Coating on the Magnesium Alloy;镁合金表面激光熔覆Cu-Zr-Al合金涂层
5.Study of Cladding Al-Alloy Coating on AZ91 Mg Alloy SurfaceAZ91镁合金表面熔覆铝合金涂层的研究
6.Study on the Electrochemical Corrosion Properties of Arc-sprayed Pseudo Zn-Al Alloy Coating电弧喷涂Zn-Al伪合金涂层电化学腐蚀性能研究
7.Effects of deformation strengthening on arc-sprayed pseudo-alloy coating电弧喷涂Zn-Al-Cu伪合金涂层形变强化效应研究
8.Structure and Properties of FeCrMoSnPBSiC Amorphous Alloy Coating by Plasma Spraying等离子喷涂FeCrMoSnPBSiC非晶合金涂层的结构和性能
9.PERFORMANCE OF ELECTRIC ARC SPRAYED COATINGS ON MAGNESIUM ALLOY镁合金表面电弧喷涂金属耐蚀涂层性能研究
10.Study on the Bonding Performance of Plasma Sprayed Ceramic Coatings on Aluminum Alloys Substrate;铝合金基体等离子喷涂陶瓷涂层结合性能研究
11.Oxidation Behavior of Thermal Sprayed NiCrAl Coating and Thermal Barrier Coating on Titanium Alloy Surface钛合金表面热喷涂NiCrAl涂层和热障涂层的氧化性能
12.The Study of Wear Resistance of Tungsten/Nickel-Base Alloy Composite Coatings;WC/Ni基合金复合涂层耐磨性研究
13.The Chemical Deposition Alloy/electroless Composite Coating with Nanometer Particles;化学沉积合金/纳米粒子化学复合涂层
14.Preparation of Composite Ceramic Incombustible Coating for Aluminum Alloy Surface铝合金表面复合阻燃陶瓷涂层的制备
15.Study on Plasma Spray Welding of Ni-Based Alloy WC Composite Coatings等离子喷焊镍基合金碳化钨复合涂层
16.Study on the Arc Spraying Process and Properties of Aluminum Coating on AZ91D Magnesium Alloy;镁合金表面电弧喷涂铝工艺及涂层性能的研究
17.Cold Spray Process for Magnesium Alloy and Properties of Coating;镁合金表面冷喷涂技术及涂层性能的研究
18.Investigation of Arc-sprayed Aluminium Coating on 6061 Al Alloy and Its Sealing Treatments铝合金电弧喷涂纯铝涂层及封孔方法研究
相关短句/例句
pseudo alloy coating伪合金涂层
1.The result shows that compared with pseudo alloy coatings,low-carbon martensite coating presents superior mechanical,anti-wear and machining properties which can be applied to engine components remanufacturing like crankshaft etc.实验结果表明,与伪合金涂层相比,低碳马氏体涂层呈现出更优异的力学性能、耐磨性能和机械加工性能。
2.Effects of heat treatments on structure and properties of Mg-A1 Pseudo Alloy Coatings were studied.本文采用电弧喷涂技术在6061铝合金基材表面制备纯铝涂层,并采用环氧树脂封孔;采用镁铝异质丝材电弧喷涂制备了四种不同镁含量的Mg-Al伪合金涂层,并对涂层进行热处理和环氧树脂封孔。
3)NiCrBSi alloy coatingNiCrBSi合金涂层
1.In virtue of electron energy spectrometer, X-ray diffractometer and scanning electron microscope, the effects of rare earth yttrium on chemical composition and structure of the vacuum fusion sintering NiCrBSi alloy coating were studied.利用电子能谱仪、X射线衍射仪、扫描电子显微镜等研究了稀土Y对真空熔结NiCrBSi合金涂层化学组成和组织结构的影响。
4)316L alloy coating316L合金涂层
1.A 316L alloy coating was prepared by high velocity oxygen fuel thermal spraying technique (HVOF) on A3 carbon steel.利用超音速热喷涂技术在碳钢基体上制备出了 316L合金涂层 ,研究了该涂层在实际炼油环境中的冲蚀行为。
5)NiCr alloy coatingNiCr合金涂层
6)NiCrWTi alloy filmNiCrWTi合金涂层
延伸阅读
氟碳涂层铝合金装饰板制成的铝合金幕墙建筑物氟碳涂层铝合金装饰板制成的铝合金幕墙建筑物 J氟碳涂层铝合金装饰板制成的铝合金幕墙建筑物
