凝固速率,solidification rate英语短句,例句大全

凝固速率,solidification rate
1)solidification rate凝固速率
1.The empirical results indicate that the increase of solidification rate can achieve intermetallic particles reinforced phase with ideal morphological features in Al-Ni alloy.实验结果表明,提高凝固速率可以使Al-Ni合金获得理想形貌的金属间化合物强化相。
2.Exporimental results show that the stress- rupture life of DZ22 at 980℃ and 220 MPa was increased from 71 hours and 50 nunutes to 168 hours and 5 minutes at relatively high solidification rate.本文采用ＺＭＬＭＣ超高梯度定向凝固法（ＺＭＬＭＣ法），研究了两种凝固速率下ＤＺ２２合金的高温力学性能和组织。
3.The dendritic arm spacings and microsegregations of directionally solidified superalloy DZ22 at various solidification rates have been studied with the help of a ZMLMC directional solidification equipment.采用新研制的超高梯度定向凝固装置，研究了不同凝固速率下定向凝固高温合金ＤＺ２２的枝晶臂间距和枝晶偏析。

英文短句/例句

1.The impurities present have an important effect on the rate of setting.存在的杂质对凝固速率有很大的影响。
2.RELATIONSHIP BETWEEN METAL-DIE INTERFACIAL HEAT TRANSFER COEFFICIENT AND CASTING SOLIDIFICATION RATE IN HIGH PRESSURE DIE CASTING PROCESS压铸过程中铸件-铸型界面换热系数与铸件凝固速率的关系
3.Effects of Cooling Rate on Solidification Structure of Zn-3.5Mg Alloy冷却速率对Zn-3.5Mg合金凝固组织的影响
4.Effect of cooling rate on solidification structure in high temperature brittle zone of 1Cr18Ni9Ti steel冷却速率对1Cr18Ni9Ti钢高温脆性区凝固组织的影响
5.Microstructure of Al-Ni-Y Ternary Alloy with Directional Solidification Under Different Stretching VelocitiesAl-Ni-Y三元合金不同拉伸速率的定向凝固组织
6.Solidified structural characteristics of rapid solidified Sn2.5Ag0.7Cu solder alloy快速凝固Sn2.5Ag0.7Cu钎料合金凝固组织特征
7.Study on Co Free and over Stoichiometric AB_5 Type Hydrogen Storage's High Rate Discharge Performance;快速凝固过化学计量比无钴AB_5型储氢合金高倍率放电性能的研究
8.Effect of Drawing Rate on Microstructure Evolution of Ti-47.5Al-2Cr-2Nb-0.2B Alloys under Directional Solidification抽拉速率对Ti-47.5Al-2Cr-2Nb-0.2B合金的定向凝固组织的影响
9.EFFECTS OF WITHDRAWAL RATE ON MICROSTRUCTURE AND STRESS RUPTURE PROPERTIES OF A Ni_3Al-BASED SINGLE CRYSTAL SUPERALLOY IC6SX拉晶速率对Ni_3Al基单晶合金IC6SX凝固组织和高温持久性能的影响
10.EFFECT OF COOLING RATE ON γ' PRECIPITATE OF DZ4125 ALLOY UNDER HIGH THERMAL GRADIENT DIRECTIONAL SOLIDIFICATION高温度梯度定向凝固冷却速率对DZ4125合金γ′相的影响
11.Melt Spinning Processing Equipment and the Structure of Mg-5%Zn Alloy Produced by RSP;单辊快速凝固装置与Mg-5%Zn合金快速凝固组织
12.fixed frequency cyclotron固定频率回旋加速器
13.high natural frequency accelerograph高固有频率自记加速计
14.the quality of being characterized by a fixed principle or rate.有固定的规则或速率。
15.The Efficiency and Feasibility of Externally Bonded FRP Strengthening Concrete Bridge Girder;外贴FRP加固混凝土桥梁的加固效率与可加固性
16.INFLUENCE OF WITHDRAWING RATE TRANSITION ON THE PRIMARY DENDRITE ARM SPACING AND MICROSEGREGATION OF DIRECTIONALLY SOLIDIFIED SINGLE CRYSTAL SUPERALLOY DD3抽拉速率跃迁对定向凝固单晶高温合金DD3一次枝晶间距和微观偏析的影响
17.Rapid Solidification and Special Coating of Highly Undercooled DD3 Superalloy;DD3高温合金的深过冷快速凝固及其快速凝固用特殊涂层
18.Microstructure Evolution of Cu-12.58%Mg Hypereutectic Alloy at Constant and Abruptly Increasing Velocities in Directional Solidification定向凝固恒速和跃迁加速下Cu-12.58%Mg过共晶合金的凝固组织演变

相关短句/例句

rate/quick quenching速率/快速凝固
3)rapid solidification快速凝固
1.Rapid Solidification of Cu-10Ag Alloy Droplets by Ultrasonic Arc Spray Atomization;超音速电弧喷射雾化Cu-10Ag合金熔滴的快速凝固
2.Carbide and its stability in FGH95 superalloy powders during rapid solidification;快速凝固FGH95合金粉末中的碳化物及其稳定性
3.Microstructure evolution of hypereutectic Al-Si alloy during rapid solidification;过共晶Al-Si合金快速凝固组织演变
4)solidification rate凝固速度
1.Influence of solidification rate on solid-liquid interface in unidirectional solidification microstructure of austenitic stainless steel凝固速度对奥氏体不锈钢定向凝固组织及其固液界面稳定性的影响
2.The percentage of RE in the matrix increases with the increase of solidification rate; the carbides in directional solidification microstructure are refined by RE added in high chromium cast iro.研究表明,稀土主要位于高铬铸铁的基体组织中,随凝固速度的增加,稀土在基体中的含量增加;稀土对高铬铸铁定向凝固组织中的碳化物具有细化作用,并随凝固速度的增加,定向凝固高铬铸铁组织细化程度提高,同时稀土的加入使高铬铸铁的抗拉强度明显提高。
3.The microstructure and its evolution of directionally solidified Cu-Cr alloy were investigated under the condition of different solidification rates,by use of optical microscope and SEM.在高梯度定向凝固装置上制备Cu-1·0%Cr(质量分数)合金,用金相显微镜、扫描电镜进行微观组织的观察,研究定向凝固速度对Cu-Cr合金微观组织形貌的影响。
5)rapidly solidification快速凝固
1.Microstructure and property of Mg_(80)Cu_(15)Y_5 alloy by rapidly solidification and hot extrusion热挤压快速凝固Mg_(80)Cu_(15)Y_5合金棒材的组织与性能
2.The effects of rapidly solidification on the microstructure and the corrosion behavior of Mg-5Zn-1Y-0.研究了快速凝固Mg-5Zn-1Y-0。
6)melt spinning快速凝固
1.3～1) are prepared by means of vacuum arc melting followed by high temperature annealing and quenching or melt spinning method.0)在常规熔铸、高温退火+淬火及快速凝固不同制备条件下的组织结构和电化学性能。
2.4 were prepared using conventional cast, rapid solidification (melt spinning) and annealing processes.4 在常规熔铸、快速凝固、退火处理不同制备条件下的组织结构和电化学性能。