形变强化,deformation strengthening英语短句,例句大全

形变强化,deformation strengthening
1)deformation strengthening形变强化
1.Microstructure and properties of W-35wt% Cu powders composite consolidated by deformation strengthening;W-35% Cu粉末形变强化复合材料组织及性能研究
2.Effects of microstructure and properties of 93W -4. 9Ni -2. 1Fe alloys by deformation strengthening;形变强化对93W-4.9Ni-2.1Fe合金组织及性能的影响
3.Structural effect of deformation strengthening on the initiation of fatigue crack;形变强化对疲劳裂纹萌生的组织效应

英文短句/例句

1.Kinetics of deformation enhanced ferrite transformation (DEFT)will all be retarded by carbon and Mn elements.碳、锰元素延迟形变强化相变动力学。
2.Influence of deformation temperature on the critical strain for completion of DEFT变形温度对形变强化相变完成时临界应变量的影响
3.Study of Structure Ultrafinement of Micro-alloyed Steel Based on Deformation Enhanced Transformation;基于形变强化相变的微合金钢组织超细化研究
4.Effects of deformation strengthening on arc-sprayed pseudo-alloy coating电弧喷涂Zn-Al-Cu伪合金涂层形变强化效应研究
5.The effect of C and Mn contents on ferrite nucleation rate during Deformation-Enhanced Ferrite Transformation (DEFT) in low carbon (Mn) steels was investigated.研究了碳、锰含量对低碳(锰)钢形变强化铁素体晶粒数目变化的影响.
6.Study on Retransformation Strengthen of the Deformation Close Grain of the AZ31 Magnesium Alloy;AZ31镁合金变形细晶再变形强化研究
7.Strengthening Mechanisms and Hot Deformation Characteristics of MP159 Alloy;MP159合金的强化机理和热态变形特性
8.Plastic Deformation and Strengthening & Toughening of Magnesium Alloy AZ80;AZ80镁合金的塑性变形与强韧化
9.FE Simulation of Deformation and Residual Stress for Surface Rolling;滚压强化变形及残余应力的数值仿真
10.Converting Idea and Strengthening Mining Administration;转变观念树形象强化矿管上水平
11.Research on Variable Force Crankshaft Rolling and Deformation Rule;曲轴变力圆角滚压强化及变形的规律研究
12.Influence of Strain Rate on Grain Refinement by Plastic Deforming;应变速率对强塑性变形晶粒细化的影响
13.stress-formation diagram胁强[应力]-形变图
14.CHIP?BREAKING BY FORCING CHIP DEFORMATION?TO REALIZE AUTOMATIC MACHINING强化切屑变形实现自动化切削加工的断屑研究
15.Alloy Phases Control and Chemical Components Optimization of ZK60 Magnesium Alloy;高强度变形镁合金ZK60合金相的控制与成分优化
16.Study on the Strength-toughness and Effect Factors of Deformation Fe-base Alloys;形变Fe-基合金的强韧化及影响因素的研究
17.The Research of the Deformation in the Rolling Process for Strengthen Crankshaft;曲轴圆角滚压强化工艺中曲轴变形的研究
18.Study on Technology of Strengthening-toughening and Electromagnetic Suspension Continuous Casting for Wrought Magnesium Alloys变形镁合金强韧化与电磁—悬浮连铸技术的研究

相关短句/例句

strain hardening形变强化
1.It was confirmed by tensile test at liquid nitrogen temperature that the change of C,Cr,Ni and Mn from upper limit to lower limit gives significant difference both in formation of deformation-induced martensite and strain hardening.在液氮内的拉伸结果表明:C、Mn、Cr和Ni的含量从标准范围的上限降到下限,显著增大形变诱发马氏体相变倾向和形变强化能力,尤其是C、Mn、Cr和Ni的含量接近下限的钢在室温下拉伸形成ε马氏体和α′马氏体,其中α′马氏体快速形成使流变应力迅速上升;此外发现,在液氮温度下,变形早期ε马氏体与α′马氏体同时存在,α′马氏体的体积分数累积到约70%后,ε马氏体消失。
2.solid solution strengthening, strain hardening, grain boundaries strengthening, dispersion strengthening, etc and the investigations on strengthening mechanism are reviewed.回顾和总结固溶强化、形变强化、晶界强化及弥散强化等常用铂强化方法及其强化机制的研究进展 ,介绍典型强化铂材料如铂铑合金、ZGSPt(Pt Rh)、ODSPt(Pt Rh)和DPHPt(Pt Rh)等弥散强化材料的主要性能和用途 ,为选择和开发更好的铂强化方法、推动强化铂的应用提供参考。
3.The erosion-wear resistance of the newly developed 28Cr cast iron was investigated with varying erosion velocities, and the strain hardening mechanism of the austenitic matrix of the iron was emphatically discussed.利用高速液/固双相流冲蚀磨损试验机模拟不同试验条件,对改性28Cr高铬铸铁进行了不同冲蚀速度下的抗冲蚀磨损性能研究,着重讨论了该材料奥氏体基体的形变强化机理。
3)work hardening形变强化
1.The work hardening property of 16Mn U shaped steel after intercritical hardening is studied in this paper.研究了１６ＭｎＵ型钢亚温淬火后的形变强化性能，结果表明：１６ＭｎＵ型钢经８２０℃×３０ｍｉｎ水淬＋２００℃回火后，具有较好的形变强化性能，适合于工程应用。
4)mechanical hardening形变强化
1.Microstructure evolution and mechanical hardening of 18-18-0.5N high-nitrogen austenitic stainless steel during cold rolling;18-18-0.5N高氮奥氏体不锈钢冷轧变形过程中的组织演变和形变强化
2.The article introduces microstructure evolution and mechanical hardening of three different kind steels during cold rolling.本文介绍了三种钢在冷轧变形过程中的组织演变和形变强化规律，发现三种钢具有不同的形变强化规律。
5)deformation hardening形变强化
1.Cutting processes and deformation hardening behavior of austenitic high-manganese steel;奥氏体高锰钢的切削过程与形变强化规律
2.The results indicate deformation hardening rule of the material around the crater is approximately described with the exponential decay.结果表明:在平头弹侵彻条件下,弹孔壁材料的形变强化规律可近似用负指数规律描述;靶板内形成大量剪切带、微裂纹等形式的损伤,导致靶板发生变形和冲塞破坏;裂纹按微孔聚集型机制扩展。
6)deformation strengthening变形强化
1.The hydrostatic extrusion technology has a potential advantage in the deformation strengthening to the metals with higher brittleness.含钨量较高的W Ni Fe密度高合金具有密度高、强度与韧性配合较好等特点 ,适合用作动能穿甲弹及防辐射屏蔽材料 ;而静液挤压技术在脆性材料变形强化方面具有很大的潜在优势。
2.In this paper,The microstructures,mechanical properties and aspects of fracture surface of tungsten heavy alloys after hydrostatic extrusion have been experimentally researched,and the deformation strengthening mechanism of tungsten alloys by hydrostatic extrusion has been preliminary discussed.对高比重钨合金经静液挤压变形强化后的力学性能、微观组织及断口形貌进行了分析和研究 ,并对静液挤压这种加工工艺对钨合金材料的变形强化机理进行了初步探讨。