1)brazed joint钎焊接头
1.Effect of rare earth cerium on the microstructure and tensile properties of brazed joint;稀土Ce对Cu-Ag-P钎料钎焊接头组织和性能的影响
2.Residual stresses in brazed joints of ceramic-metal heater;金属/陶瓷发热体直接钎焊接头的应力分析
3.Fracture microstructures and properties of Al-Li alloy brazed joints;铝锂合金钎焊接头断口组织与性能
英文短句/例句
1.Bonding process of pure copper with amorphous Cu-P interlayer非晶Cu-P钎料钎焊接头形成过程
2.Affect of Different Solder on Intension of Cu/W Brazing Joint不同焊料对Cu/W钎焊接头强度的影响
3.Research on the Properties and the Interfacial Reactions of Sn-Zn-Cu(Ni) Lead-free Solders;Sn-Zn-Cu（Ni）无铅钎料及其钎焊接头界面反应研究
4.Microstructure and Mechanical Property of Joint by Amorphous Fillers非晶镍基钎料钎焊接头性能及微观组织的研究
5.Microstructure of Soldering Joint of Rapidly Solidified Sn2.5Ag0.7Cu Solder Alloy快速凝固态Sn2.5Ag0.7Cu钎料钎焊接头的显微组织
6.Study on the Creep Behavior of SnAgCuRE Solder Joints;SnAgCuRE钎焊接头蠕变行为的研究
7.Thermomechanical Fatigue Properties of Lead-Free Solder Joints;无铅合金钎焊接头热疲劳性能的研究
8.Study on micro-performance of resistance brazing joint of Ti and CuTi-Cu电阻钎焊接头微观性能研究
9.Key Factors Effecting on Properties of Ti_3Al Braze Joints影响Ti_3Al钎焊接头性能的关键因素探索
10.The Brazing Technics of the EGR Cooler and the Study on the Corrosion Resistance of the Brazed Joint;废气再循环（EGR）冷却器的钎焊工艺及钎焊接头的耐腐蚀性研究
11.Effects of Brazing Temperature on Vacuum Joint Microstructure and Microhardness of Inconel Superalloy钎焊温度对镍基合金真空钎焊接头组织及硬度的影响
12.Microstructure and Residual Mechanical Property of Thermomechanically-Fatigued Composite Solder Joints;复合钎料钎焊接头热疲劳显微组织与残余力学性能研究
13.Microstructure and Performance of Sn-9Zn Based Lead Free Solder/Cu Solder Joint and Their Interface RegionSn-9Zn基无铅钎料/Cu钎焊接头及界面区组织性能的研究
14.Effect of soldering parameters on the soldered joint microstructure performance of the down quenching SnAgCu solder alloy工艺参数对急冷型SnAgCu系钎料合金钎焊接头组织性能的影响
15.Effect of Cr on Property of Stainless Steel Joint Brazed with Series Ni-P Filler MetalCr对Ni-P系钎料钎焊不锈钢接头性能的影响
16.Study on Soldering Procedure and Joint Properties of Down Quenching SnAgCu Solder Alloy急冷型SnAgCu系钎料合金钎焊工艺及接头性能研究
17.Microstructure and Properties of Vacuum Brazing C_f/C Composites Using Reactive Al Based Filler Metals铝基活性钎料真空钎焊C_f/C复合材料焊接接头的组织及性能
18.Phase Constitution of Soldering Seam and Mechanical Properties of Zn Matrix Filler Metal Soldering Magnesium Alloy AZ31B JointZn基钎料钎焊镁合金AZ31B接头的钎缝物相及力学性能
相关短句/例句
brazing joint钎焊接头
1.Research status of ceramics/metal brazing joint strength;陶瓷/金属钎焊接头强度研究现状
2.The strength,microstructure,interface combine mechanism of brazing joint with electrolytic composite plating Ni-Ti ceramic and metal was analyzed and discussed by SEM,EDX and X-ray.用扫描电子显微镜、能谱仪及X射线衍射仪分析和讨论了复合电镀Ni-Ti陶瓷与金属钎焊接头的强度、微观结构和其界面结合机制。
3.The mechanical property and microstructure of vacuum brazing joint of LF21 aluminum alloy after addition Ni to Al-Si Cu base brazing flux.结果表明,采用添加Ni元素的真空钎料,可提高钎焊接头的剪切强度,其机制在于Ni元素能够改善LF21铝合金真空钎焊接头焊缝及其基体组织的分布。
3)Soldering joint钎焊接头
4)soldered joint钎焊接头
1.Microstructure and characteristics of soldered joint of high strength ZA alloy;高强度ZA合金钎焊接头的显微组织及性能
2.The mechanical properties, structure and compounds of soldered joints were also analyzed.对锌铝合金的钎焊性进行了分析,对ZnCl2 NH4Cl KF钎剂的去膜机理以及Cd Sn Zn钎料各组分的作用进行了阐述;分析了锌铝合金钎焊接头的力学性能、组织和成分;并对钎焊接头进行了无损检测。
3.7Cu lead-free solder, effects of rare earth Cerium on the properties and reliability of soldered joints were studied by the spreading test and shear strength test.7Cu为基础研究对象，在其中添加不同量的稀土铈，通过铺展试验和钎焊接头剪切试验，比较系统地研究稀土铈对Sn-3。
5)solder joints钎焊接头
1.Effects of Ni on the Performance of Sn2.5Ag0.7Cu0.1RE Solder Alloy and Its Solder Joints;Ni对SnAgCuRE钎料及其钎焊接头性能的影响
6)melt-brazed joint熔钎焊接头
1.Formation mechanism of electron beam melt-brazed joint of chromium-bronze and duplex phase stainless steel;铬青铜与双相不锈钢电子束熔钎焊接头形成机制
延伸阅读
电阻焊与钎焊一、电阻焊 1.电阻焊的特点及应用 电阻焊是压焊的主要焊接方法。电阻焊是将焊件组合后，通过电极施加压力，利用电流通过接头的接触面及邻近区域产生的电阻热进行的焊接方法。 电阻焊的主要特点是：焊接电压很低（1～12V）、焊接电流很大（几十～几千安培），完成一个接头的焊接时间极短（0.01～几秒），故生产率高；加热时，对接头施加机械压力，接头在压力的作用下焊合；焊接时不需要填充金属。 电阻焊的应用很广泛，在汽车和飞机制造业中尤为重要，例如新型客机上有多达几百万个焊点。电阻焊在宇宙飞行器、半导体器件和集成电路元件等都有应用。因此，电阻焊是焊接的重要方法之一。 电阻焊按工艺方法不同分为点焊、缝焊和对焊（见挂图）。这里仅介绍点焊。 2.点焊 点焊是焊件装配接接头，并压紧在两电极之间，利用电阻热熔化母材金属，形成焊点的电阻焊方法。点焊多用于薄板的连接，如飞机蒙皮、航空发动机的火烟筒、汽车驾驶室外壳等。 （1）点焊机 点焊机的主要部件包括机架、焊接变压器、电极与电极臂、加压机构及冷却水路等。焊接变压器是点焊电器，它的次级只有一圈回路。上、下电极与电极臂既用于传导焊接电流，又用于传递动力。冷却水路通过变压器、电极等部分，以免发热焊接时，应先通冷却水，然后接通电源开关。
