脱碳层,Decarburized Layer英语短句,例句大全

脱碳层,Decarburized Layer
1)Decarburized Layer脱碳层
1.Decarburized layer appears in the two sides of the crack.裂纹两侧出现了一定宽度的脱碳层,脱碳层内部出现了二次氧化产物。
2.In order to require of the decarburized layer depth of T11A～T13A carbon tool steel wire rod up to the GB/T1298-1986 standard,the correspond heating processes for roughing soaking pit,pusher-type furnace for structural steel and rail and step-by-step furnace for wire were established based on the feature of T11A～T13A carbon tool and process technology in Pan Steel Co.为使攀钢T11A～T13A碳素工具钢盘条的脱碳层深度满足GB/T12 98 1986标准的要求 ,根据T11A～T13A碳素工具钢的特点及攀钢的生产工艺 ,对初轧均热坑、轨梁推钢式加热炉及线材的步进式加热炉制定了相应的加热工艺 ,生产出的T11A～T13A碳素工具钢盘条的脱碳层全部满足GB/T12 98 1986标准的要求。
3.A new method for characterization of softening in a decarburized layer is proposed.提出一种表征脱碳层软化的新方法，该方法借助Ｘ射线应力分析技术测量屈服强度在脱碳层深度方向上的分布。

英文短句/例句

1.specified percentage decarburation规定脱碳率的脱碳层厚度
2.Permissible depth of flaw and decarburized layer裂纹之容许深度及脱碳层
3.Diameter Tolerance, Ovality and Average Decarburized Layer Depth直径公差，偏圆度及脱碳层的平均深度
4.Determination of depth of decarborization of steelGB/T224-1987钢的脱碳层深度测定法
5.The relationship between the thickness of decarbonic layer of metal spring and the temperature and time heated;金属弹簧脱碳层厚度与受热温度和时间的关系
6.RESEARCH ON CHANGE LAW OF DEPTH OF DECARBURIZATION LAYER ON SURFACE OF WIRE BAR对线材表面脱碳层深度变化规律的研究
7.To remove carbon dioxide or carbonic acid from.脱去…的二氧化碳或碳酸
8.ELO-Vac process电炉真空脱碳脱气法
9.Effect of Composition and Grain Size of Ti(C,N) on the Cobalt-rich Layer ofGradient Cemented CarbideTi(C,N)的碳氮比及粒度对脱β层梯度硬质合金的影响
10.Engine-decarbonising chemicals引擎脱碳用化学制剂
11.Impact of 60Si2MnA wire rod decarburization on oil-hardened and tempered steel wire60Si2MnA线材脱碳对油淬火—回火钢丝脱碳的影响
12.This, in turn, react with the iron to form oxide free iron and carbon dioxide.一氧化碳接着又与铁形成脱氧的铁和二氧化碳。
13.Model and effect of slow-release organic carbon-source materials on carbon release and denitrification缓释有机碳源材料释碳模型与生物脱氮效应
14.Influence of carbon to nitrogen ratio on nitrogen and carbon removal by integrative A/O process一体化A/O工艺碳氮比对脱氮除碳的影响
15.Model for the distribution of carburized case depth of spur gear in warm forming after car burizing直齿轮“渗碳-温挤”渗碳层厚度分布模型
16.SiC-HfSi_2-TaSi_2 HIGH TEMPERATURE ANTI-ABLATION COMPOUND COATING ON CARBON/CARBON COMPOSITES碳/碳复合材料SiC–HfSi_2–TaSi_2抗烧蚀复合涂层
17.Iron & Low Carbon as Base Metal低碳钢或铁基层金属
18.fissured carbonate reservoir裂缝性碳酸盐岩储集层

相关短句/例句

decarburization layer脱碳层
1.The change law of depth of decarburization layer on surface of wire bar is researched based the statistics data.根据邢钢线材表面脱碳层深度统计数据的变化规律,对脱碳层深度的变化情况进行了研究。
2.The factors,which influence the quality of wire rod for automobile suspension spring,primarily include chemical composition,the quantity,morphology and distribution of inclusions,gas content,surface quality,decarburization layer,microstructure,mechanical property,dimension tolerance etc.影响轿车悬架簧用弹簧钢线材质量的因素主要有线材化学成分、夹杂物数量和形态分布、气体含量、表面质量、脱碳层、显微组织、力学性能及尺寸精度等,通过采用LF精炼炉和RH炉精炼技术,大方坯轻压下技术和控轧控冷技术,控制冶炼、连铸、加热、轧制等工序的关键参数,转炉冶炼时铁水比不低于90%,吹炼终点w(C)≤0。
3.The fracture of 28Cr2Mo slab during rolling process was studied by determining impurities and microstructure and decarburization layer.对轧制28Cr2Mo钢过程中出现断坯的裂纹部位进行了夹杂、脱碳层及组织分析,并采用瑞典Thermocalc软件对28Cr2Mo钢热力学性质进行了计算。
3)decarbonized layer脱碳层
1.A study of the decarbonized layer of T8A steel;关于T8A钢脱碳层研究
2.Through metallographic examination and microanalysis, it can be observed that at the weld interface of the joints there is a decarbonized layer on the S25C steel side and a carburized layer on the SUS405 steel side.金相及显微分析可见，在焊接接头的结合界面上，Ｓ２５Ｃ钢一侧存在脱碳层，ＳＵＳ４０５钢一侧存在增碳层，这是造成接头组织分布及硬度分布不均匀的主要原因。
4)superficial decarbonization表层脱碳
1.The results indicate that superstandard inclusion of material,which leads to primary microcrack at moveing round confectioning,is the principal reason of the crack under 100KN force,superficial decarbonization at heat-treating decreases the admission compression force of crack.结果表明:原材料内部夹杂物超标是导致产品在绕弯成形时产生初生裂纹,并在热处理后于规定100kN压力试验时产生开裂的主要原因,热处理过程中产生的表层脱碳降低了产品产生开裂的允许压力。
5)Total decarburized layer总脱碳层
6)Fully decarburized layer全脱碳层