1)alumina matrix氧化铝基
1.Study on the friction and wear performance of alumina matrix ceramic materials reinforced by AlTiC;AlTiC增韧补强氧化铝基陶瓷材料磨擦磨损性能
英文短句/例句
1.Core Leach Equipment and Craft of Alumina-base Ceramic Core氧化铝基陶瓷型芯的脱芯设备与工艺
2.Manufacture and Properties of the Al_2O_3-based Ceramics;氧化铝基复合陶瓷的制备和性能测试
3.Effects of ZnO/Y_2O_3 on Properties of Alumina-Based CeramicsZnO/Y_2O_3对氧化铝基陶瓷性能的影响
4.Researched on properties of alumina substrate material prepared by low-temperature sintering低温烧结氧化铝基体材料性能的研究
5.The Study on Modified Alumina Based Catalyst for High Concentration Carbonyl Sulfide Hydrolysis;改性氧化铝基高浓度羰基硫水解催化剂研究
6.The Microstructure and Toughening-Strengthening Mechanism of the Al_2O_3-matrix Composite Ceramics;氧化铝基复相陶瓷的显微结构与强韧化机理
7.Study on the Technology and Mechanism of Alumina Ceramic Prepared from Aluminosilicate Refractory Waste;用硅酸铝质耐火材料废料制备氧化铝基陶瓷的技术及机理研究
8.Wettability of Al/Al_2O_3 system and direct aluminum bonded substrates铝和氧化铝的润湿性及氧化铝陶瓷敷铝基板
9.The principal ore of aluminum, composed mainly of hydrous aluminum oxides and aluminum hydroxides.铝土矿铝的基本矿石，由含水的氧化铝和氢氧化铝组成
10.The Research on the High Aluminum Zinc Based Alloy Intensified by Rare Earth Oxide;稀土氧化物强化的高铝锌基合金研究
11.Ruthenium Catalyst Supported on Alumina for Ammonia Synthesis;氧化铝负载钌基氨合成催化剂的研究
12.alumina boria catalyst氧化铝-氧化硼催化剂
13.Preparation of Titanium Dioxide Nanotube on Anodizing Aluminum Oxide Template;基于阳极氧化铝模板的二氧化钛纳米管制备
14.Model of prediction of flow rate of alumina powder based on PSO-LSSVM基于PSO的氧化铝粉流量LS-SVM预测模型
15.metal-alumina-oxide silicon金属－氧化铝－氧化物硅
16.In this paper, the solidifying structure of alumina short fiber reinforced aluminum-silicon alloy composite is studied on the basis of domestic alumina short fibers.本文在国产氧化铝短纤维基础上,研究了氧化铝短纤维增强铝硅合金复合材料的凝固组织。
17.Finite Element Analysis of Thermal flection Distortion in Hard Alumina Film/Al-allay Substrate System by ANSYS基于ANSYS的硬质氧化铝薄膜/铝合金基体系统热屈曲变形有限元分析
18.Theory and Technology of High Purity Ultrafine Alumina Preparation from Spent Al_2O_3-based Catalyst由废铝基催化剂制备高纯超细氧化铝的理论及技术研究
相关短句/例句
aluminum supported copper oxide铝基氧化铜
3)Al-based oxide铝基氧化物
4)alumina substrate氧化铝基板
5)umina base catalyst氧化铝基催化剂
6)Al/Al2O3铝/氧化铝
延伸阅读
碳化硅纤维补强氧化铝基复合材料分子式：CAS号：性质：以碳化硅纤维为增强体，氧化铝陶瓷为基体在适当的工艺下复合而成的材料。该复合材料具有良好的强度，优异的断裂韧性和高温抗氧化性。以含纤维体积为35％的材料为例，室温和1200℃的四点弯曲强度达477和351MPa，断裂韧性18～23MPa，在1400℃下仍具有良好强度。其主要制造方法有热压法，金属铝直接氧化法(Lanxide process)，溶胶-凝胶法(sol-gel)。其中以Lanxide工艺获得最成功。用该方法制得的单向Nicalon纤维/氧化铝复合材料强度和韧性分别达785MPa和27MPa·m1/2。该复合材料可望用于燃汽轮机和空间结构等。用金属铝直接氮化法工艺制造Nicalon碳化硅纤维/氧化铝燃汽轮机燃烧室部件和火焰稳定器，经过高温台架试验部件未见破坏或损坏。
