1)shear bond strength剪切粘结强度
1.The shear bond strength of three different commercial luting cements to the ceramic material was evaluated.置于37℃蒸馏水里保存24h后,进行剪切粘结强度测试。
2.Objective: this in vitro study was firstly to evaluate the effect of two different bleaching regimens and two weeks post-time bonding on the shear bond strength of dentin to composite resin, and observe the dentin/composite interface of each group under scanning electron microscope.目的:㈠通过用临床两种常用的漂白方法对离体牙进行漂白,采用即刻和延迟2周粘结树脂,分别测定牙本质和树脂剪切粘结强度,并用扫描电镜观察粘结界面超微形态,探讨漂白方法及漂白后粘结时间对牙本质粘结强度的影响,为临床上漂白后牙齿进行树脂粘结修复提供理论依据。
英文短句/例句
1.Comparative study of shear bonding strength on different bonding treatments of different fiber posts in root canal不同纤维桩与根管不同粘结处理修复后剪切粘结强度对比研究
2.A contrast of the shear strength between two enamel adhesion techniques:self-etching and all-etching自酸蚀与全酸蚀粘接系统对牙釉质剪切粘结强度的研究
3.The Effect of Treating Time on the Shear Bond Strength of the Seventh Generation of Adhesive粘结处理时间对第七代粘结剂剪切强度的影响
4.Effect of sandblasting on shear bond strength between rebonded metal brackets and enamel喷砂处理对脱落托槽与牙面粘结的抗剪切强度
5.Indirect methods to measure the interface bond strength include the interlaminar shear strength test.测量界面粘结强度的间接方法包括层间剪切强度试验。
6.testing methods for impact shear strength of adhesive bonds胶粘剂剪切冲击强度试验方法
7.testing methods for shear strength of adhesive bonds by tensile loading用拉伸负荷测定粘合剂剪切强度
8.testing methods for strength properties of adhesives in shear by compression loading胶粘剂压缩剪切强度试验方法
9.Test method for apparent shear strength of pipeline coatings to metal管道防腐层涂料与金属粘结的剪切强度试验方法
10.Effect of Different Treatments of Dentin Surface on Sheer Bond Strength between Different Luting Agents and Dentin.;牙本质表面不同处理方法对粘结剂与牙本质间剪切强度的影响
11.Shear Bond Strength of Orthodontic Brackets Bonded with a Self-etching Adhesive;自酸蚀粘接剂粘接抗剪切强度的实验研究
12.The investigation of shear strength of partly consolidated clay未完全固结软粘土抗剪强度试验研究
13.Experimental study on shear bonding strength of textile reinforced concrete (TRC) for strengtheningTRC加固构件抗剪粘结强度试验研究
14.testing methods for strength properties of adhesives for wood in shear by tension loading胶粘剂拉伸剪切强度测定方法 (木材对木材)
15.Testing method for compressive shear strength of dowel joint by inorganic adhesivesGB/T11177-1989无机胶粘剂套接压缩剪切强度试验方法
16.Testing method for torsional shear strength of doedl joint by inorganic adhesivesGB/T14903-1994无机胶粘剂套接扭转剪切强度试验方法
17.The Influence of Dentin Desensitizers on the Shear Bond Strength of a Total-etch System;脱敏剂对全酸蚀粘接剂剪切强度的影响
18.Effect of Chlorhexidine Application on Shear Bond Strength of Brackets Bonded with Fuji Ortho LC氯己定对FujiOrtho LC粘接托槽抗剪切强度的影响初探
相关短句/例句
Shear bond strength抗剪切粘结强度
3)bond shear strength between pavement layers层间剪切粘结强度
4)shear bond strength剪切粘接强度
1.5 mm/min was used to press samples,and values of shear bond strength(SBS)and types of interface failure were recorded and analyzed statistically.5mm/min的生物力学测试机进行压缩剪切,记录各组剪切粘接强度值和界面断裂类型,并进行统计学分析。
5)shear bond strength粘接抗剪切强度
1.In this study , we bonded resin orthodontic brackets to two kind of commonly - used prosthodontic materials: porcelain and light - cured composite resin with domestic adhesive, ordinary light - cured composite resin and BISCO ORTHO - ONE~? orthodontic Direct Bonding System respectively and then the shear bond strength of the re.本实验通过使用不同的粘接剂粘接树脂托槽与经过不同方式表面处理的瓷和光固化复合树脂修复材料,对其粘接抗剪切强度,影响树脂托槽与修复材料直接粘接的因素以及去粘接后原修复面的完整性进行实验研究。
2.In this study, we bonded metal orthodontic brackets to two kinds of commonly-used prosthodontic materials: porcelain and light-cured composite resin with domestic adhesive and ordinary light-cured composite resin respectively and then the shear bond strength of the metal brackets, the integrity of the prosthodontic surface after debonding and the microsco.本研究使用国产的粘合剂和普通光固化复合树脂粘接金属托槽与瓷、光固化复合树脂两种常用的修复材料，并对其粘接抗剪切强度，去粘接后原修复面的完整性，表面处理后修复面的显微形态结构进行了实验研究。
6)Shear bond strength抗剪粘结强度
延伸阅读
粘结强度粘结强度bonding strength n janjje qjangdu粘结强度(bonding strength)两种材料粘结在一起时，单位界面之间的粘结力。用耐火砖砌筑各种窑炉时，通常在砖与砖之间需用耐火泥浆粘结;某些不定形耐火材并(如投射料、喷涂料、喷补料等)在使用、施工时，要有一定的粘结能力，以使其有效地粘结于施工基体。为了考察粘结剂的性能，确定加入粘结剂的种类和数量，需要测定粘结强度. 中国测定耐火泥浆常温粘结强度的试验方法，分为抗折粘结强度(GB5o24·3)和抗剪粘结强度(GB5o24·4).抗折粘结强度试验方法的要点是用泥浆粘结成试样(图1)，在抗折强度测定仪上进行抗折试验。(图2)介 图2测定抗折粘结强度方法示意图按下式计算抗折粘结强度: R=些 ZbhZ式中R为抗折粘结强度，MPa;F为试样粘结面断裂时的最大载荷，N;L为两支撑辊间的中心距，mm;b为粘结面处试样的宽度，mm;h为粘结面处试样的高度，mm。 抗剪粘结强度的试验方法，是在两块试样之间用耐火泥浆粘结(图3)，干燥后进行剪切试验。 { 阵界‘ 图3测定杭剪粘结强度用试样示意图结果的计算如下: _F 万.~一;州 ~.A式中刀。为抗剪粘结强度;F为试样粘结面断裂时最大载荷;A为试样的粘结面积。 此外，在科研工作中还设计过一些其他方法，如拉伸法(图4)、剪切法(图5)。一自缪一羚 图4拉伸法测定粘结强度示意图一介结界面异 图5剪切法测定粘结强度示意图 不论采取何种方法，应选用自身强度大于被测泥浆粘结强度的试块，否则会出现试块断裂而粘结界面没有断开的现象。 (王通荣)
