1)simple shear test单剪试验
1.Large-scale simple shear test on mechanical properties of interface between concrete face and gravel underlayer;砾石垫层—混凝土接触面力学特性单剪试验研究
2.Mechanical characteristics of the soil-structure interface in response to simple shear tests under constant stress increment ratio paths;土与结构接触面等应力增量比路径单剪试验力学特征分析
3.By using a special two dimensional simple shear test apparatus with rigid lateral platens, simple shear tests are carried out on an assembly of aluminum rods, one of which is then simulated by distinct element method (DEM).用铝棒堆积体作为二维粒状体的模型材料进行单剪试验 ,然后对其用离散单元法进行数值模拟 ,对于宏观应力应变关系 ,两者结果基本吻合。
英文短句/例句
1.Negative shear test on soil-concrete interface using simple shear apparatus土与混凝土接触面反向剪切单剪试验
2.Simple Shear Test and Model Study of Interface Under Constant Stress Increment Ratio Stress Paths接触面等应力增量比路径单剪试验及模型研究
3.Study on Characteristics of Intereface between Undisturbed loess and Concrete by Using Large-sized Single Shear Apparatus原状黄土与混凝土接触面特性的大型单剪试验研究
4.The Comparative Study on the Simple Shear Test and Direct Shear Test of Interface between Soil and Structure土与结构界面模型单剪与直剪试验对比研究
5.Experimental Research of the Single Plate Framing Connection between Truss-Steel Beam and Concrete Wall钢架梁、混凝土墙单剪板连接试验研究
6.Experimental study on seismic performance of a three-layer shear wall structure with single row of steel bars三层单排配筋剪力墙结构抗震性能试验研究
7.Experimental study on seismic performance of medium-height RC shear wall with bi-directional single row of steel bars双向单排配筋中高剪力墙抗震性能试验研究
8.Experimental studies on behavior of stud shear connectors under monotonic loads单调荷载下栓钉连接件受剪性能试验研究
9.Experimental research on behavior of saturated sand under drained monotonic shearing排水条件下饱和砂土单调剪切特性试验研究
10.Experimental Study on the Shear Behavior of High Strength Cold-formed Steel Framing Shear Wall with Single Panel;高强冷弯薄壁型钢立柱单面覆板组合墙体抗剪性能试验研究
11.Experimental Study on Seismic Performance and Analyse of RC Shear Wall with Opening and Bi-Directional Single Row of Steel Bars;双向单排配筋带洞口混凝土剪力墙抗震性能试验与分析
12.Experimental Study on Monotonic Shear Behavior and Cyclic Volumetric Strain Increase Pattern of Saturated Sand;饱和砂土单调剪切特性与循环体变规律的试验研究
13.Study on seismic performance of mid-rise RC shear wall with single row of steel bars and simplified boundary elements简化边缘构造的单排配筋中高剪力墙抗震性能试验研究
14.Three-parameter Generalized Failure Criteria Based on Tension,Compression and Shear Uniaxial Strength基于拉伸、压缩、剪切单轴强度试验值的材料三参数广义强度准则
15.Experimental study on the hysteretic behavior of single-diagonal unbonded steel plate brace encased in reinforced concrete panel单斜无黏结内藏钢板支撑剪力墙滞回性能的试验研究
16.Effect of Orientation of Principal Stress on the Undrained Behavior of Saturated Sand under Monotonic Shearing饱和砂土不排水单调剪切特性试验研究——考虑剪切过程中变化的总主应力方向的影响
17.Pins and grooved pins-Shear testGB/T13683-1992销剪切试验方法
18.testing methods for shear strength of plastics by punch tool塑料剪切强度试验方法
相关短句/例句
single shear test单剪试验
1.The bond behavior between FRP plate and concrete is studied by experiment on a single shear test setup.采用FRP板-混凝土块搭接接头的单剪试验方法研究FRP板与混凝土的粘结性能,为增强粘结效果,对FRP板表面采取了粘结粗砂的措施,试验同时考虑粘砂长度对粘结性能的影响。
2.A single shear test about CFRP-steel member was performed to investigate the shearing bond performance between CFRP sheet and steel member.采用碳纤维布-钢构件搭接接头的单剪试验方法,深入研究了碳纤维布-钢构件的抗剪粘接性能。
3.To study the bond behavior between glass fiber reinforced polymer(GFRP) plate and concrete,36 specimens were tested on a single shear test setup.采用GFRP板-混凝土块搭接接头的单剪试验方法,考察了4种GFRP板与混凝土的连接方式(粘粗砂法、涂环氧胶法、粘剪力键法以及同时粘剪力键和粘粗砂的综合法),同时考虑了粘砂长度、环氧胶类型、混凝土类型和附加GFRP布增强等因素,并提出了一种抗剪设计方法。
3)Single shear testing单面剪切试验
4)monotonic shear test单调剪切试验
5)cyclic simple shear test循环单剪试验
1.Comparison beween the model’s theoretical forecast and the cyclic simple shear test results proves the reliability of the model,and comparison between the model’s theoretical forecast and the Masing’s rule-based models indicates the advantage of the novel model,which can reflect the impact of damping ratio of soil on its dynamic response truly.理论预测结果与循环单剪试验结果的比较,说明了模型的可靠性。
6)improved simple shear test改进单剪试验
延伸阅读
装箱单、重量单、尺码单装箱单、重量单、尺码单 [装箱单、皿t单、尺码单1装箱单(Pack-ing Ust)是说明货物包装情况的单据，包括包装材料、包装方式，以及详细的包装内容，如花色、规格搭配等。进口地海关主要依据装箱单对某一特定内容的包装内容进行检查，也是进口商核对货物的依据。装箱单的内容有:单据名称、卖方名称、唆头、件数、规格、数量、毛净重、签字等。 重量单(Weight ust)是由卖方或第三者提供的，表明货物重量的单据。一般包括皮、毛、净重。它必须和其他单据上所表示的货物重量一致。 尺码单就不详细介绍了。
