偏心载荷,eccentric load
1)eccentric load偏心载荷
1.Failure theory and experiment of the tray in roadway roof with eccentric load;偏心载荷作用下煤巷顶板托盘失效的理论与实验分析
2.Owing to construction,the FRP bolt is often under eccentric load which is harmful for bolt by theory analysis.玻璃钢锚杆作为煤帮支护的理想材料,由于施工等原因经常受到偏心载荷作用,理论分析表明偏心载荷作用是煤帮锚杆极为不利的受力状态。
英文短句/例句

1.EXPERIMENT RESEARCH ON THE FRP BOLT UNDER ECCENTRIC LOAD玻璃钢锚杆受偏心载荷作用试验研究
2.Calculation of the spatial instability problem for the simply supported l-beam under the eccentric loads;简支工字梁在偏心荷载下空间失稳问题的计算
3.The foundation pile improved finite bar element method under oblique eccentric loading倾斜偏心荷载作用下基桩改进有限杆单元法
4.Thin-Walled Steel I-Girders Subjected to Eccentric Patch Loading;薄壁工字形钢梁在小片荷载偏心作用下的承载力
5.Collapse Mechanism and Design Criteria of Eccentrically Braced Steel Frames under Cyclic Load;偏心支撑钢框架在循环荷载作用下的破坏机理及抗震设计对策
6.Behavior Study of K Shape Eccentrically Braced Steel Frames under Cyclic Load;K型偏心支撑钢框架在循环荷载作用下的性能研究
7.Analysis of Pile under Inclined and Eccentric Loads in Layered Soils and Research in Model Test;倾斜偏心荷载下基桩受力分析与室内模型试验研究
8.The Analysis and Design Criteria of Y Style Eccentrically Braced Steel Frames under Cyclic Load;Y型偏心支撑框架循环荷载下滞回性能研究及设计建议
9.Research on the Effect of upper Structure and Loads for Behaviors of Composite Masonry Walls with Holes Which are Eccentrically Compressed上层结构与荷载对开洞组合砖墙出平面偏心受压性能的影响研究
10.TORSIONALLY COUPLED DYNAMIC ANALYSIS OF ASYMMETRIC OFFSHORE PLATFORM SUBJECTED TO WAVE AND EARTHQUAKE LOADINGS地震与波浪荷载作用下偏心海洋平台扭转耦联参数影响分析
11.Monitor and Stress-strain Analysis of Pit Prop Steel Beam Under Eccentric Load偏心荷载下基坑支撑梁钢筋应力应变分析及监测
12.Analysis of the comfortability in designing the Long-span steel truss connective bridge withstanding eccentric concentrated loads受偏心集中荷载作用的钢结构连接天桥设计中的舒适度分析
13.Strength of Ⅰ-Girders with Delta Stiffeners Subjected to Eccentric Patch Loading小片荷载偏心作用下具有三角加劲肋的Ⅰ型梁的强度分析
14.Ultimate Strength of I-Girders Under Eccentric Patch Loading:Derivation of a New Strength Reduction Coefficient小偏心荷载作用下I形截面梁极限强度:推导新强度换算系数
15.A Study of Computation Model with Load-structure Method for Unsymmetrically Loaded Closely-spaced Tunnel;偏压小间距隧道的荷载结构特性研究
16.At supersonic speeds the control load acts mainly on the deflected surface itself, and hence has its centroid even farther to the rear.超音速时操纵载荷主要作用在偏转面本身上,因此它的作用中心甚至更加靠后。
17.Based on the analyzing results, the eccentric loading increased the dynamic-instability district of the arm and would be adverse to its dynamic-stability.结果表明,荷载偏心增大了支臂的动力不稳定区域,不利于支臂的动力稳定。
18.Behavior Study of Y-eccentrically Braced Steel Frames under Cyclic Load Considering Length Changed of Link Beam;考虑耗能段长度变化时Y型偏心支撑钢框架在循环荷载作用下的滞回性能研究
相关短句/例句

eccentric load偏心荷载
1.Accurate method for calculating definite rectangular base foundations under eccentric loads;偏心荷载作用时矩形基础底面面积最小值的计算
2.Calculation of the spatial instability problem for the simply supported l-beam under the eccentric loads;简支工字梁在偏心荷载下空间失稳问题的计算
3.The exact formula for calculating the moment of single foundation under uniaxial eccentric load;单向偏心荷载作用下柱下独立基础弯矩的精确计算公式
3)eccentric loading偏心荷载
4)load eccentricity荷载偏心
1.In order to understand the bearing capacity of steel column in fire after partial damage of fire retardant coating (FRC), calculation and analysis using differential equation of equilibrium are carried out to predict the bearing capacity of hinged steel column with initial flexure and load eccentricity suffering partial damage of FRC.为了得到火灾下防火涂料局部破损后钢柱的承载力,根据平衡微分方程,对防火涂料破损后有初弯曲和荷载偏心的两端铰接钢柱的极限承载力进行了计算和分析。
5)eccentric live loads偏心活荷载
1.On the basis of theoretical study of reference document , the approximate calculation graphic expressions of internal force and an approximate calculation method of internal force increasing coefficient of continuous skew girder bridges are put forward under eccentric live loads.在文献 [3]的理论研究基础上 ,提出了连续斜梁桥在偏心活荷载作用下的内力近似计算图式和内力增大系数的近似计算方法。
6)Constant load eccentricity常荷载偏心
延伸阅读

在AutoCAD中偏心圆锥与偏心圆台实体的画法现在要画一个偏心圆锥,底面在WCS的XY平面上,圆心(0,0,0),半径100,顶点(300,0,400)在ZX平面上. 1)连接PA,PB. A(-100,0,0) B(100,0,0)图1在当前坐标下: 2)延长PA到C,使PA=CA;延长PB到D,使PB=DB;3)连接CD;4)以CD为直径画圆;5)用XLINE命令中的二等分选项作角CPD的角平分线PO,交CD于O;6)过O作CD的垂线,交圆于E,F;图27)用三点UCS命令,取三点为:O,P,C; 8)过点O作PO的垂线GO,交PC于G;图39)再次用三点UCS命令,取三点为O,F,G; 10)现在就可以画椭圆锥了!cone-e-c-捕捉O点-捕捉F点-捕捉G点-a-捕捉P点;图411)回到WCS,剖切椭圆锥 SL-选择椭圆锥-回车-XY-回车-捕捉P点.12)删除辅助线条.图5