1)spraying intensity喷淋强度
1.With a tester designed to study the spraying intensity,a systematic study was performed of the spraying in tensity of the swirling atomizing spraying nozzles under different conditions.试验采用喷淋强度试验装置,对旋流式压力雾化喷嘴的不同条件下喷淋强度进行了系统研究,探讨了其影响因素,并建立了液雾流场分布函数表达式,为烟气净化中旋流喷嘴的设计提供依据。
英文短句/例句
1.Effect of Spraying Intensity on Acid Column Leaching of Low-grade Primary Sulfide Copper Ore Under Catalysis Conditions催化条件下喷淋强度对低品位原生硫化铜矿酸法柱浸的影响
2.Measure Methods of Spray Distribution in Radial Direction of Pressure Atomization Nozzle压力式雾化喷嘴径向喷淋密度的测量方法
3.Properties of water vapor supersaturation under spray scrubbing conditions喷淋洗涤条件下水汽饱和度分布特性
4.a device that releases water from overhead pipes through nozzles that open automatically with the rise in temperature.温度升高时，喷嘴自动打开水能从高架管中自动喷淋的装置。
5.Control of Sprinkling System Based on THI for Cooling Dairy Cows;基于温湿度指数的牛舍喷淋降温系统的控制
6.Thermal sprayed coatings--Determination of adhesion strengthGB/T8642-1988热喷涂层结合强度的测定
7.Thermal sprayed metallic coatings-Determination of shear strengthGB/T13222-1991金属热喷涂层剪切强度的测定
8.Thermal sprayed coatings--Determination of tensile strengthGB/T8641-1988热喷涂层抗拉强度的测定
9.And when shot peening treater, the fatigue strength of the chian will improve 12.3%.经喷丸处理链条疲劳强度可提高12.3％。
10.Numerical Simulation of the Influences of Turbulence Intensity on Fuel Spray;涡流强度对燃油喷雾影响的数值模拟
11.The Infuences of Material Hardness on Shot Peening Strengthing Treatment;材料硬度对喷丸组织强化效果的影响
12.Simulation for Cathodic Electric Field Intensity in Jet Electrodeposition喷射电沉积阴极电场强度的仿真研究
13.The Influence of the Solution Flow Bate on the Absorption Effect in the Falling Film Absorber of the Lithium Bromide Absorption溶液喷淋密度对溴化锂降膜吸收器吸收效果的影响
14.Adhesive strength, hardness and the thermal shock resistance of spraying coating were tested.测试了喷涂层的结合强度、硬度以及抗热震性能。
15.doused her head in the shower;把头放在喷淋浴下；
16.soak-brush-rinse bottle washer浸泡-刷洗-喷淋洗瓶机
17.containment spray injection system安全壳喷淋注入系统
18.core spray recirculation system堆芯喷淋再循环系统
相关短句/例句
Intensified spraying强喷淋
3)spraying width喷淋宽度
1.The process characteristics include a new control method,which eliminated the on-off-on water spraying;the spraying width varied with the slab width;the number of the cooling zone and loop,and the length of the narrow spraying zone increased;almost all the zone used air-water cooling spray nozzles,etc.工艺特点:新的控制方法消除了间隙喷水,喷淋宽度随板坯宽度变化,冷却区数量及回路数量增加,窄边喷淋区长度增加,几乎全部采用气水冷却喷嘴等。
4)spray density喷淋密度
1.Based on experimental apparatus, how the spray density and water temperature affected the heat and mass transfer performance of the evaporative condenser are studied.在蒸发式冷凝器性能测试实验平台基础上,测试了水流参数如喷淋密度和水温对蒸发式冷凝器传热传质性能的影响。
2.The effects of the spray density and the head-on air velocity on the heat transfer performance of the water film were investigated under various operation conditions.建立了蒸发式冷凝器管外水膜传热性能测试实验平台,调节不同操作参数,测试了喷淋密度和迎面风速对管外水膜传热性能的影响。
3.Processing the Zinc alloy white smoke includes the gaseous and granular pollutant simultaneously with the packed tower,investigating the influence degree of pH as well as spray density of absorption fluid to the processing of Zinc alloy white smoke,and inspecting the effect of alkali-acid two stages treatment.为了治理同时含有气态和粒状污染物的锌铸型白烟,采用填料塔对其进行洗涤和吸收,考察了吸收液的pH值以及喷淋密度对锌铸型白烟处理效果的影响,并根据碱洗和酸洗的特点,考察了碱酸两级处理的效果。
5)spraying density喷淋密度
1.Relationships of pressure drop across the packing zone with the apparent velocity and flooding volocity with spraying density are obtained.找出了填料层压降和空塔气速的变化关系，泛点气速和喷淋密度的关系。
2.It is found that the main factor affecting padding + baffle plate pressure drop is gas velocity without spraying;When spraying,it is shown that gas velocity and spraying density jointly affect pressure drop.结果发现:空塔时气速对填料+挡板压降的影响较大;有喷淋时,压降的变化主要是气速、喷淋密度共同作用的结果。
6)leaching intensity淋滤强度
延伸阅读
激光喷码机与喷墨喷码机的比较喷印的图案文字和数码主要包括生产日期、有效期、批号、条形码以及商标图案。防伪标记和中文字样等，是贯彻卫生法和促进包装现代化强有力的设备。这种技术广泛应用于多行业，多材质表面，运行高速，稳定，适配各种车间，生产线工况的包装标刻。应用材质包括纸张、PVC、玻璃、塑料、橡胶、木材、陶瓷、皮革、布料等各种材质。应用对象目前主要分两大类，一类是产品的包装，主要分布在食品、饮料、烟草、酒类及医药行业：另一类是产品本身，即在产品上标注其规格型号等，使其成为产品本身的一部分内容，主要分布在电线电缆、建筑材料、电子产品和商务印刷等行业。
