流变变形,rheological deformation英语短句,例句大全

流变变形,rheological deformation
1)rheological deformation流变变形
1.The modified Burgers model was applied in numerical calculation by the advanced implements in FLAC 3D and ST102 oil tank foundation s rheological deformation were calculated by modified Burgers model enclosed in FLAC 3D.采用FLAC3D所提供的二次开发程序接口,研制了改进的Burgers模型数值计算程序,并将该流变模型计算数值程序嵌入FLAC3D,对ST102大型油罐软土地基在充水预压过程中的流变变形进行数值模拟计算,计算结果与实测结果进行了对比,对比结果显示数值计算结果与实测结果相接近,证明了改进的Burgers流变模型及其参数的合理性。
2)creep deformation流变变形
1.Based on the Duncan E-μ constitutive model used for analyzing soil-rock dams,3 parameters creep model used for studying creep deformation of soil-rock dams is developed and programmed.流变分析表明,三峡工程二期围堰结构的水平和垂直流变变形存在时间上的不同步性,垂直流变位移的稳定时间在堰体结构施工完成后的6个月左右,而水平流变位移的稳定时间只需要3个月。
2.In this paper, a numerical procedure is developed to study the influence of the creep deformation on the separation between concrete slab and cushion layer in high CFRD.考虑堆石体的流变特性,并结合天生桥一级面板堆石坝的现场观测结果,对高面板堆石坝中的面板脱空问题进行了有限元计算分析,研究了坝体流变变形对面板脱空和垫层亏坡问题的影响。
3)deformation and flow形变和流变
4)Rheo-forming流变成形

英文短句/例句

1.The Theoretical、Experimental & Practical Research on Rheological Forming of Metals;金属流变成形的理论、实验与应用研究
2.Investigation on Technique and Theory of Rheoforming for Semi-Solid Aluminum Alloys;半固态铝合金流变成形工艺与理论研究
3.The Research on the Isothermal Rheological Forming of the Titanium Alloy Compressor Disk of WZ9 Helicopter;WZ9直升机钛合金压气机盘等温流变成形研究
4.Study on Fabricating and Rheoforming of In-Situ Synthesized Magnesium Matrix Composites原位镁基复合材料制备及流变成形研究
5.Slurry Preparation by LSPWES Method and Rheocasting of A356 Aluminum Alloy半固态A356铝合金浆料的LSPWES制备和流变成形
6.Effect of Thermal-Fluid Coupled Field on Alloy Microstructure in Continuous Rheo-Extrusion Process连续流变成形过程中热流耦合场对合金组织的影响
7.Formation and Development of Temple Based Unit in Hehuang River Valley during Ming and Qing Dynasty;明清时期河湟流域寺族的形成与演变
8.Rheological Characteristics Of ZrO_2 Ceramic Injection MoldingZrO_2陶瓷注射成形的流变特性
9.Dominant Ideology of British Labour Party;英国工党主流意识形态形成和变化的原因
10.Rheological Studies and Gel Formation of Naked Oat β-Glucan裸燕麦麸β葡聚糖的流变学特性及凝胶形成
11.Research on Technology of Rehoroll-Casting Forming for Semi-solid AZ91D Magnesium Alloy;半固态AZ91D镁合金流变铸轧成形技术研究
12.Study on Rheo-Diecasting Process of Semi-solid Magnesium Alloy;镁合金半固态流变压铸成形技术的研究
13.A Survey on the Formation and Heritage of the Zigu Belief;紫姑信仰的形成及其传承流变中的文化思考
14.On the Formation and Evolution of Literary Nationality in the Global-Cultural Context;论全球化语境中的文学民族性的形成与流变
15.Viewpoint On The Formation, Evolution And Development of The Fistart Branches In Chinese Wushu;武术拳术流派的形成、演变与发展之管见
16.The Study of the Ceramic Paste Rheological Properties in the Paste Extrusion Process挤出成形过程中陶瓷泥料的流变特性研究
17.Study on rheological properties of feedstock for ZrO_2 powder injection molding氧化锆陶瓷注射成形的喂料流变性能研究
18.Flow Stress Constitutive Equation of Spray Forming High-alloyed Tool Steel喷射成形高合金工具钢的流变应力本构方程

相关短句/例句

creep deformation流变变形
1.Based on the Duncan E-μ constitutive model used for analyzing soil-rock dams,3 parameters creep model used for studying creep deformation of soil-rock dams is developed and programmed.流变分析表明,三峡工程二期围堰结构的水平和垂直流变变形存在时间上的不同步性,垂直流变位移的稳定时间在堰体结构施工完成后的6个月左右,而水平流变位移的稳定时间只需要3个月。
2.In this paper, a numerical procedure is developed to study the influence of the creep deformation on the separation between concrete slab and cushion layer in high CFRD.考虑堆石体的流变特性,并结合天生桥一级面板堆石坝的现场观测结果,对高面板堆石坝中的面板脱空问题进行了有限元计算分析,研究了坝体流变变形对面板脱空和垫层亏坡问题的影响。
3)deformation and flow形变和流变
4)Rheo-forming流变成形
5)Rheoforming流变成形
1.Research Progress on Rheoforming Technology of Semi-solid Alloy;半固态合金流变成形技术的研究进展
2.Experimental Study on Twin-roll Strip Rheoforming for Semi-solid Magnesium Alloy;镁合金半固态双辊板带流变成形研究
3.Developing Tendency and Countermeasures of Rheoforming Slurry-making;流变成形浆料制备技术发展动向及其对策
6)Rheological Forming流变成形
1.Failure and Material Selection of the Mold Used for Ferrous Metal in Semi-solid Rheological Forming;半固态金属流变成形模具失效与选材
2.The theory of rheological forming, a deformation theory of greater universal significance, has been developed recent years based on the theories of plastic forming, superplastic forming and creep forming.流变成形理论是近年来在塑性成形原理、超塑性成形、蠕变成形理论的基础上发展起来的、更富普遍性意义的一种成形理论，是流变学在塑性加工领域的具体应用。