1)consolidation characteristic固结特性
1.According to the experimental information, the plane strain FEM based on the Biot consolidation theory, which based on the linear-elastic model, has been used to research the consolidation characteristic for the three kinds of strengthening methods.根据试验段资料，借助比奥固结有限元基于线弹性模型，对三种预压方法的固结特性进行了研究；并将基于邓肯—张非线性弹性模型的数值解与实测值进行了比较。
2.In order to search after its applying to expressway roadbed improvement, this paper studied consolidation characteristic and distortion law hi soft soil under positive and negative action, introducing parse explain and numerical calculation theory.为探索适用于高速公路的真空堆载联合预压法的应用效果，本文详细研究了正负压共同作用下土体的固结特性和变形机理，介绍了有关真空预压的解析解及有限元数值计算理论。
英文短句/例句
1.Study on Consolidation Properties and Deformation Mechanism of Marine Ooze;海相淤泥的固结特性及变形机理研究
2.Experiment Study on Solidifying Characteristic of Fly Ash-Desulphogypsum;粉煤灰—脱硫石膏固结特性的实验研究
3.Experimental study on consolidation properties of two marine soft soils两种滨海相软土固结特性的试验研究
4.Concretion properties of organic-binder oxidate pellets and strengthen measures有机粘结剂氧化球团固结特性及强化措施
5.Creep-Consolidation Characteristics of Soft Soil and Finite Element Analysis of Consolidation of Soft Soil Foundation;软土的蠕变—固结特性及软土地基固结有限元分析
6.Study on Consolidation Properties of Dredger Fill Cofferdam with Variable Permeability;考虑渗透性变化时的吹填土围堰固结特性研究
7.An Experimental Study for the Consolidation of the Typical Clayey Soil in the North China Plain华北平原典型黏性土体固结特性的试验研究
8.Study on the Mechanical Properties and Anchoring Mechanism in Anchored Structure of Underground Cavity地下洞室锚固结构的力学特性与锚固机理研究
9.Research on ground consolidation and settlement features in plastic drainage plate塑料排水板加固地基固结沉降特性研究
10.The Characteristics of Deformation and Strength of Staturated Structural K_0-Consolidated Loess;饱和结构性K_0固结黄土的变形强度特性研究
11.On the Stress-Strain-Strength Characteristics of Quasi-Overconsolidated Clay拟似超固结粘土的应力-应变-强度特性
12.Analysis of Dynamic and Thermal Characteristics of Fixed Joint in Machine Tool;机床固定结合面动态与热态特性分析
13.Test Study on Consolidation and Creep Characteristics of Nanning Expansive Soils;南宁膨胀土固结与蠕变特性试验研究
14.Experimental Study on Pore Water Pressure Behaviors in Soft Soil Consolidation in Nansha Port南沙港区软土固结孔压特性试验研究
15.Creep Characteristics for Consolidated-Undrained Triaxial Compression of Yingkou Soft Soil营口软土的固结不排水剪切蠕变特性
16.Characteristics of unsaturated core soil in earth-rock dam under consolidated undrained test非饱和心墙料的固结不排水试验特性
17.Equivalent consolidation deformation properties and one-dimensional analysis method of unsaturated soils非饱和土等效固结变形特性与一维固结变形分析方法
18.Study on Dynamic Properties of Anisotropic Saturated Clay;各向异性固结饱和软粘土动力特性研究
相关短句/例句
Structure natural characteristics结构固有特性
3)consolidation deformation properties固结变形特性
1.The special consolidation deformation properties result in the engineering mechanics of "hard on top and soft underneath".特殊的固结变形特性导致红粘土层形成上硬下软的工程特性,这种特性将对地基变形和边坡稳定产生不良影响,对此提出加固方法和措施。
4)solidification characteristics凝固特性
1.The paper summarizes the history of refractory elements addition,relates their influences on the solidification characteristics and microstructure,prospects the problems that still need to be solved and the future investigation trends.总结了在镍基单晶高温合金的发展过程中难熔元素添加的特点,综述了难熔元素对镍基单晶高温合金的凝固特性与凝固组织的影响,并指出了其中存在的问题,展望了未来研究发展的方向。
2.Directional solidification characteristics of successfully shaped y-TiAl alloys is then presented and investigated in relation with the experimental parameters.本文利用课题组自行设计的真空宽调速电磁成形定向凝固实验设备，以Ti-48％Al(at％)为实验材料，采用电磁成形定向凝固技术，对极活泼的γ-TiAl工程合金无污染定向凝固组织制备工艺进行了系统的研究，并对包晶系TiAl基金属间化合物的非平衡定向凝固特性进行了初步探讨，主要研究内容及结论如下： 1。
5)Inherent characteristics固有特性
1.In order to obtain the natural frequencies and vibration,the inherent characteristics of interface structure is analyzed by simulating the actual working environment.针对挠性传输载体与连接器接触的接口,运用ANSYS仿真分析软件,建立实际工作状态下接口结构的仿真模型,对接口结构进行固有特性仿真分析,得出其固有频率和固有振型。
6)solidification characteristic凝固特性
1.Effect of lithium on solidification characteristics of pure copper;Li对纯Cu凝固特性的影响
2.The casting temperature, casting speed, water flow rate of secondary cooling system and other process parameters are determined according to the solidification characteristics of 45 steel, such as low liquidus temperature, wide solidus and liquidus co-areas, low-strength slab shell under high-temperature, and to the existing equipment conditions of Caster 3.根据45钢液相线温度低、固液共存两相区宽及铸坯坯壳高温强度低的凝固特性和3#连铸机现有的设备状况,确定了浇注温度、拉速及二次冷却配水量等工艺参数。
3.The formation mechanism of TiC and TiB_2 particulates was studied,and the solidification characteristic of melting-pool of argon arc cladding was examined.并分析了TiC和TiB2颗粒的形成机理和氩弧熔池的凝固特性。
延伸阅读
固结1.牢固团结。 2.凝结;郁结。
