1)Stoker-fired boiler层燃炉
1.Study on soot formation regularity in coal pyrolysis process in stoker-fired boiler by fixed-bed;基于固定床上层燃炉煤热解碳黑形成规律的研究
2.Few works has been mentioned for soot formation derived from lump-coal combustion in stoker-fired boiler.研究层燃炉煤燃烧的碳黑形成机理,对减少污染物排放和提高燃烧效率有重要意义。
英文短句/例句
1.The Experimental Studies on Calcium-injection Desulfurization During High Temperature Combustion in Fired Bed;层燃炉炉内高温燃烧喷钙脱硫的试验研究
2.Study on Combustion and Dechlorination Characteristics of RDF Which is Suitable for Grate-Fired Furnace;可用于层燃炉的RDF固氯特性和燃烧性能的研究
3.Numerical Simulation of Municipal Solid Waste Combustion in a Fixed Bed;层燃炉排上城市固体垃圾燃烧过程的数值模拟
4.Experimental Study of the Influence on the Combustion Charicteristics in the Stoker Boiler by Air Distribution Modes;配风方式对层燃炉燃烧特性影响的试验研究
5.STUDY ON GENERATION CHARACTERISTICS OF SO_2 FROM MEDIUM AND SMALL LAYER BURNING BOILERS FIRING SOFT COAL中小型燃用烟煤层燃炉SO_2生成特征的研究
6.NO_x Emission Factors from Medium and Small Layer Burning Boilers Firing Soft Coal中小型烟煤层燃炉NO_x排放因子的研究
7.Experimental Study on Soot Formation Mechanism and Emission Control Methods Derived from Lump Coal Combustion in Stoker Fired Boiler;层燃炉煤燃烧碳黑形成机理的实验研究与排放控制方法
8.Analysis of the Accident Caused by Using Biomass Fuel Instead of Coal in Grate-firing Boiler层燃燃煤锅炉改烧生物质燃料引起的事故分析
9.Primary Studies on Applications of Stratified Combustion in Backward Moving Chain Grate Boilers正转链条炉排锅炉分层燃烧技术应用初探
10.Study on the Slagging Characteristics of Biomass Briquette Layer-burning Boiler;生物质成型燃料层燃锅炉结渣特性的研究
11.Analysis to Accident of the Layer Coal-Fired Boiler after Changing Combustion Biomass Fuel层燃煤锅炉改烧生物质燃料引起的事故分析
12.The Development of 84 MW Large-capacity Grate Firing Water-fire Tube Hot Water Boilers84MW大型层燃水火管热水锅炉的开发
13.The application of fuzzy control in the bed temperature control system of burned coal boilers模糊控制在燃煤锅炉床层温度控制中的应用
14.The Design and Development of Large-capacity Stoker-fired Corner-tube Hot Water Boiler新型大容量层燃角管热水锅炉设计开发
15.Experimental Study on the Combustion of Simulated Municipal Solid Wastes in a Fixed Bed;层燃式城市固体垃圾焚烧炉床内燃烧过程试验研究
16.Numerical Simulation of Flow Field in the Bottom Burner Region of Tangentially Fired Furnace四角切圆燃烧锅炉底层燃烧器区域流场数值模拟
17.Study on High Temperature Corrosion Resistance and Mechanisms of Fe/Cr Coatings for Protection of Boilers in Coal-burning Power Plants;燃煤电站锅炉用新型Fe/Cr涂层耐高温腐蚀性能和机理的研究
18.Research and Development on System of New Coatings for Protection of Boiler Tubes in Coal-Fired Power Station;燃煤电站锅炉管道新型防护涂层系统研究与开发
相关短句/例句
stoker[英]['st??k?(r)][美]['stok?]层燃炉
1.Sensitive pressure transducer was used to record the combustion pressure fluctuation in furnace to study the combustion pressure fluctuation of “puffs” in stoker.针对层燃炉冒正压时的燃烧“喘息”现象,利用微压传感器对炉膛燃烧压力波动进行了测量,采用自相关函数结合功率谱密度的方法分析了频谱特征。
3)stoker boiler层燃炉
1.Most of the stoker boilers in China are operated under low efficiency situation and release a great deal of pollutants, so they have already been the high energy-consumption facilities that our country intends to bring under control in recent years.配风的研究对层燃炉提高效率具有举足轻重的意义。
4)layer burning boilers层燃炉
1.The influences of boiler output,excess air coefficient,coal volatility and nitrogen content on NO_x emission factors were investigated using statistical analysis of NO_x field data and coal analysis data from 86 medium and small layer burning boilers firing soft coal.以86台中小型烟煤层燃炉(额定出力≤65 MW)的燃料特性和NOx排放实测数据为基础,采用统计分析方法,分析了锅炉出力、过量空气系数、燃煤挥发分〔w(挥发分)〕和燃煤含氮量〔w(N)〕对NOx排放因子的影响,研究了NOx排放因子的确定方法。
2.The influences of boiler output,excess air coefficient,coal sulphur content on sulphur conversion rates and SO_2 generation factors in coal combustion were investigated by statistical analysis method using SO_2 field data and coal analysis data from 87 medium and small layer burning boilers firing soft coal,actual capacity of boilers≤70 MW.以87台中小型燃烟煤层燃炉(≤70MW)的燃料特性分析数据和SO2排放实测数据为基础,利用统计分析方法,分析了锅炉出力、过量空气系数、燃煤硫含量对燃烧过程中硫转化率和SO2产生系数的影响,研究了硫转化率和SO2产生系数的确定方法,获得了我国中小型燃烟煤层燃炉的硫转化率和SO2产生系数。
5)grate-fired boiler层燃煤炉
1.Technique for retrofitting grate-fired boilers into natural gas-fired boilers;浅谈层燃煤炉改燃天然气技术
6)grate firing boiler层燃锅炉
1.Study of the cornstalk in the grate firing boiler combustion characteristics, maintaining safe and economic operation of the boiler is of great significance.研究玉米秸秆在层燃锅炉内的燃烧特性,对于保持锅炉的安全经济运行具有重要意义。
延伸阅读
钢板涂层炉钢结构安装钢板涂层炉钢结构安装steel construction installation of plate coating oven (图2)。烘烤过程中挥发出来的涂料溶剂有爆炸的可壳由下而上分段交替安装，施工中必须保持多段柱组能性，为此，烘烤炉的结构要求既能封闭气体防止外装后的垂直度和各层梁的标高，并作出完整记录。最后逸，又能保证有意外爆炸时炉壳会轻易裂开而不致伤应普遍刷一遍油漆。人。整个炉体采用轻型钢结构框架围护。炉壳板是用两炉壳安装对于水平位置的炉子，可将分段制造块薄层钢板中间充填隔热材料，钢板端部压制成凹凸的炉壳依次吊在已装好的钢平台上，然后逐段校正，使截面，拼嵌而成。整个炉壳处于同一水平和中心线上，壳体各段对位后 再焊成整体。当立式布置时，炉壳随支支晋墙珍 、2典型的重。，的涂后烘烤炉横断面示意、拿{{裴置翼默;纂瑟髦 炉子安装完后，应随即将炉内所有杂 物和灰尘清除干净。 炉体结构安装一般在厂房建成后吊装，吊机应(张泽湘)利用厂房内的桥式起重机，也可用汽车式起重机或履带式起重机、卷扬机等。包括炉体支架安装和炉壳安装两部分。 炉体支架安装炉体支架常用H型钢、工字钢、槽钢、角钢等组成的柱、梁框架结构，用螺栓组装校正后采用焊接。按先立柱后安装梁和斜撑的顺序逐件组装。若起重能力和场地允许，最好在地面组装成片后再吊装。立柱吊装前，应划出中心标记，并以连接梁的牛腿为基准划出标高标记。利用柱底垫铁，及时校正好立柱中心垂直度和标高，并用地脚螺栓固定。节点组装螺栓应在各杆件校正后全部固紧。为使施工方便，钢梯、走台、柱杆应同步安装。立式加热炉炉体较高，其支架钢结构柱子由多段组成，通常可采取支架钢结构和炉gangbon tucenglu gangJlegou anzhuong 钢板涂层炉钢结构安装(steel eonstruction installation of plate eoating oven)钢板涂 层炉是用于对钢板进行镀前加热或涂后供干的生产设 备。其中，典型的加热炉为热镀锌或热镀锡生产线上的 带钢镀前加热炉，典型的烘干炉为涂层生产线上的带 钢涂漆后的烘烤炉，均由钢炉壳和支撑炉壳的钢支架 以及加热用燃烧气体供给管与燃烧废气排放管等组 成。 炉体结构因镀前加热炉和涂后烘干炉而异。 (l)镀前加热炉。有卧式布置和立式布置两种。卧 式布置时，长条形的炉壳安放在支撑钢构架上，起支撑 作用。立式布置时，炉壳分排垂直安装在支撑钢结构的 空格中(图1)。
