1)High temperature parts高温部件
1.In accordance with the working conditions of the gas turbine engine and the principles of chemical reaction, this paper discusses in detail the mechanism of hot corrosion caused by corrosive media - Na2SO4, NaCl and V2O5 in the high temperature parts of the gas turbine engine.根据燃气涡轮发动机的工作环境及化学反应的原理，本文详细讨论了因腐蚀介质──Ｎａ２ＳＯ４、ＮａＣｌ、Ｖ２Ｏ５引起的燃气涡轮发动机高温部件热腐蚀的机理。
2.In order to realize the safe operation of steam turbine unit,suitable materials of high temperature parts must be selected.超超临界汽轮机的高温部件是汽轮机组中最容易出现损坏事故的部分,为保证机组的安全运行,须对高温部件选择合理的材料。
英文短句/例句
1.Material Analysis for High-temperature Components of Ultra Supercritical Pressure Boilers超超临界压力锅炉高温部件材料简析
2.Cooling Design for High Temperature Parts of Ultra-supercritical 1000 MW Steam Turbine1000MW超超临界汽轮机高温部件的冷却设计
3.Research on Numerical Simulation and Lifetime of High-temperature Components Creep Damage under Multiaxial Stress State;多轴应力状态下高温部件蠕变损伤的数值模拟及寿命研究
4.Research on the Deformation and Creep Life of the High Temperature Parts of Steam Turbine of the Thermal Generating Unit;火力发电机组汽轮机高温部件变形及蠕变寿命的研究
5.APPLICATION OF THE CONDITION MONITORING AND LIFE MANAGEMENT SYSTEM ON HIGH-TEMPERATURE PARTS OF ULTRA-SUPERCRITICAL 1000MW UNIT超超临界1000MW机组高温部件状态监测寿命安全管理系统的应用
6.Materials Selection and Preventing Solid Particle Erosion Measures of Ultra-supercritical Steam Turbine's High Temperature Parts超超临界汽轮机高温部件材料选择与防止固粒侵蚀措施
7.Advanced Materials and Cooling Technologies for High Thermal Load Components in Ultra Supercritical Steam Turbine超超临界汽轮机高温部件材料和冷却技术之探讨
8.Hot-rolled heat-resisting superalloy bars for rotating partsGB/T14993-1994转动部件用高温合金热轧棒材
9.The Technique Rebuilding on the High Temperature Reheater of B&W BoilerB&W锅炉高温再热器部件改造实践
10.Water seal of high temperature resisting material isolates spring working parts from water during relief.在泄压时,耐高温材料的水密封部件将水与其它活动部件隔离开来
11.An experimental study of the characteristics of diorite melt composition under different degree of melting高温高压条件下闪长岩部分熔融产物的反常现象
12.Set the number of degrees that any heated component can exceed its assigned set-point temperature before an over temperature fault occurs.严格限定所有受热零部件温度高于所设定最高运行温度的度数，以防设备过热而出现故障。
13.The prefabricated parts can also be made.高温热风管道内衬，加热炉内衬等部位，可制成预制构件。
14.Structural parts requiring high strength; machine parts,truck chassis parts.用于需要高温强度的结构部分，接写零件及货车底盘。
15.STUDY ON THE LIFE EVALUATION AND OPERATION ANALYSIS EXPERT SYSTEM FOR BOILERS' HIGH TEMPERATURE BEARING ELEMENTS;锅炉高温承压部件寿命预测及运行分析专家系统的研究
16.Study on the Operation Analysis Expert System for Boller s High Temperature Bearing Elements;火电厂锅炉高温承压部件运行分析专家系统的研究
17.Maglev Charactericstics of HTS YBCO Bulk Above Permanent Magnet Guideway under External Disturbances外部扰动条件下高温超导YBCO块材在永磁轨道上的磁悬浮性能
18.maximum assessed fuel element temperature燃料元件最高设定温度
相关短句/例句
high temperature compression part高温承压部件
3)Boiler high temperature part锅炉高温部件
4)high temperature and high pressure parts of boiler锅炉高温、高压部件
5)high temperature position高温部位
6)high temperature component高温构件
1.The optimum preventive maintenance strategy and maintenance period for high temperature components;高温构件最优预防维修策略及维修周期
2.Remaining safety and useful life of high temperature components are always degraded by service induced material damage including creep, thermal fatigue, over heat oxidation, carburization, etc.高温构件在服役过程中所受到的损伤 ,如蠕变、热疲劳、过热氧化和渗碳等时刻都在缩短高温构件的使用寿命和剩余安全裕度。
延伸阅读
将UG里的一个装配部件输出成单个部件文件法一： 关闭（turn off）FileàOptions->Load Options下"Partial Loading "选项 打开装配部件 选择File->Export->Part 在"Part Specification"下选择"new" 选择"Specify Part"，指定输出部件文件名称及位置 将"Object Selection Scope"设定为"All Objects" 选择"Class Selection->Select All"高亮所有对象 按"OK" 该种方法特点：每一个部件的特征都会汇集在新部件的MNT里。可以方便编辑。法二：闭（turn off）File->Options->Load Options下"Partial Loading "选项 打开装配部件 Application->Assembly Assemblies->Components->Create New，给出想要输出的部件文件名及路径。 如下图1，在ANT上双击新产生的部件文件，使其成为工作部件。 Assemblies->WAVE Geometry Linker，将设置改为"Body"，选择所有组件的体。 将"Create Non-associative"开关设为"On"，见下图2 将产生的部件设成显示部件，仅保存刚产生的新部件，不保存旧的装配部件。
图1
图2 该种方法特点：每一个部件在新部件的MNT里只会显示一个link的特征。没有相应特征可以编辑。
