1)gas solid flow characteristics气固流动特性
1.The influence of the arrangements of pipes on gas solid flow characteristics in the dense section of standpipe in the circulating fluidized bed is studied on a cold state experiment platform.在冷态试验台上研究了循环流化床料腿密相段中不同管束布置方式对气固流动特性的影响。
英文短句/例句
1.Study on Hydrodynamics in Circulating Fluidized Beds for Chemical-Looping Combustion of Coal;燃煤循环流化床置换燃烧气固流动特性研究
2.EFFECTS OF THE GAS-SOLID PHASE FLOW CHARACTERISTICS IN CIRCULATING FLUIDIZED BED AT DIFFERENT MIXING GAS DISPOSAL MODE混合气流布置方式对循环流化床气固流动特性的影响
3.Effect of Secondary Air Jets on Hydrodynamics of a Square Circulating Fluidized Bed二次风射流对方形循环流化床气固流动特性影响的研究
4.An Experimental and Numerical Study of the Gas-Solid Flow Characteristics in the Circulating Fluidized Bed Desulfurizer Reactor;循环流化床脱硫器气固流动特性实验研究与模拟计算
5.Study on Structural Arrangement and Gas-solid Flow Characteristics of a New Circulating Fluidized Bed Boiler新型循环流化床锅炉结构布置及气固流动特性的研究
6.Research on Solid-gas Two-phase Flow Character Inside the Pulverized Coal Exhauster;排粉风机内部气固两相流动特性研究
7.Study on Characteristics of the Gas-Solid Two Phase Flow in Magnetically Fluidized Bed and Its Application;磁流化床气固两相流动特性及其应用的研究
8.Investigation of Gas-Solid Two-Phase Flow Behavior in Fluidized Bed by Means of Les-Dsmc Method;应用LES-DSMC方法研究流化床气固两相流动特性
9.Flow Characteristics Investigation of Gas Liquid Solid Exterior Circulation Fluidized Bed;气液固三相外循环流化床流动特性的研究
10.The Experimental Study of the Characteristic of Gas-solid Two Phases Flow Around Square Cylinders by PIV;气固两相方柱绕流流动特性的PIV实验研究
11.The Experimental Study of the Characteristic of Gas-solid Two Phases Flow Around Circular Cylinders by PIV;气固两相圆柱绕流流动特性PIV测试与研究
12.The Investigation of Experiment and Numerical Simulation on Flow Characteristic in Gas-Fluidized Bed气固流化床流动特性的实验研究与数值模拟
13.Flow Properties and Pressure Drop of Gas-Liquid-Solid Natural Circulating in Fluidized-Bed气-液-固自然循环流化床中的流动特性和压降
14.Numerical Simulation and Experiment on the Gas Solid Flow and Combustion Character in Circulating Fluidized Bed Combustion for Solid Medical Waste;固态医疗垃圾循环流化床气固流动与燃烧特性数值分析及实验
15.Pressure fluctuation in a gas-solid fluidized bed of Geldart B classification particleGeldart B类颗粒气固流化床内的压力波动特性(英文)
16.Numerical Simulation of Hydrodynamics for Gas-solid Two-phase Flows of Nano Particles纳米颗粒气固两相流动特性的数值模拟
17.Numerical Study of the Gas-Solid Flow Characteristics in a High Efficiency Particulate Air Filter高效过滤器内气-固两相流动特性的数值研究
18.Numerical Simulation of Isothermal Gas-Solid Two-Phase Flow Behavior in Solid Rocket Engine;固体火箭发动机内气固两相等温流动特性的数值分析
相关短句/例句
gas-solid flow characteristics气固流动特性
1.The experimental study was carried out on a cold test rig of circulating fluidized bed(CFB) boiler for the gas-solid flow characteristics in the inlet flue duct of the high temperature cyclone separator.在循环流化床(CFB)锅炉冷模试验台上,对高温旋风分离器入口烟道内的气固流动特性进行了试验研究。
3)gas-solid flow characteristic气-固流动特性
4)gas solid two phase flow characteristics气固两相流动特性
1.In view of this, a pulverized coal regulating device has been developed based on the gas solid two phase flow characteristics.针对风扇磨制粉系统燃用混煤时燃烧经济性和稳定性差的现状 ,根据气固两相流动特性开发研制了锅炉煤粉调节器。
5)characteristics of gas-solid flow气固运动特性
6)airflow characteristics气流流动特性
1.Numerical simulation of airflow characteristics in furnace of six-corner tangentially fired boiler;六角切圆炉膛气流流动特性的数值模拟
延伸阅读
橡胶流动特性分子式:CAS号:性质:橡胶的流动特性即高聚物分子运动的黏流特性。这种黏流特性具体表现在两个方面:一是胶料的黏度随温度增高而降低,这种黏度与温度的依存关系可用下式表示:黏度。式中,A为常数;E为黏流活化能;R为气体常数;T为绝对温度。二是胶料的黏度随切变速率(即加工机械速度)的增大而降低。以上两个黏流特性表明橡胶加工中胶料的加工温度与切变速度是十分重要的、需要严格控制工艺条件。还应指出,天然橡胶胶料温度对黏度的变化率小于丁苯及丁腈胶料,在加工中需注意。