Grf/Al复合材料,Grf/Al-MMCs英语短句,例句大全

Grf/Al复合材料,Grf/Al-MMCs
1)Grf/Al-MMCsGrf/Al复合材料
2)Al SiC w/Al compositesAl-SiC_w/Al复合材料
3)B4C/Al compositesB4C/Al复合材料
1.The phase composition of B4C/Al composites fabricated by pressureless infiltration was analyzed,and th.分析了无压浸渗法所制备B4C/Al复合材料的相组成,并测试了其力学性能。
4)SiCp/Al MMCsSiCp/Al基复合材料
1.In order to analyze the weldability of SiC particle reinforced aluminum metal matrix composites(SiCp/Al MMCs),plasma arc in-situ welding of SiCp/Al MMCs was carried out using argon-nitrogen mixture as plasma gas with Ti-Mg mixed powder as in-situ material.为分析SiCp/Al基复合材料的焊接性,以Ti-Mg混合粉末作为填充材料,采用氮氩混合等离子气体对SiCp/Al基复合材料进行等离子弧原位焊接。
2.Plasma arc "in-situ" welding of SiCp/Al MMCs were carried out using argon-nitrogen mixture as plasma gases with Ti-Ni alloying as "in-situ" material.以Ti-Ni合金作为填加材料,采用氮氩混合等离子气对SiCp/Al基复合材料进行等离子弧原位焊接。
3.In this paper,SiCp/Al MMCs were selected as research objects,and process and mechanism of SiCp/6061Al MMCs by plasma arc welding(Ar and N2 as ionized gas, Ar as fielded gas) were systematically studied.研究表明填加Al-Si-Ti-Ni合金对SiCp/Al基复合材料进行等离子弧原位焊接,填加材料中Ti含量为5%时,可以有效抑制有害相Al_4C_3的生成,得到的焊缝组织较为致密,没有气孔、微观裂纹等缺陷,接头强度较之不加填充材料时有较大提高,达到226MPa,提高了接头的力学性能。
5)SiC_P/Al compositesSiC_P/Al复合材料
1.Study of electroless Ni plating with palladium-free activation on the surface of SiC_p/Al composites;SiC_p/Al复合材料表面无钯活化化学镀镍的研究
2.A simple model was introduced for describing the effect of porosity on the thermal conductivity of spark plasma sintered(SPS) consolidated SiC_p/Al composites in terms of an effective medium approximation(EMA) scheme.本文基于有效介质近似原理(EMA)提出一简易模型(MEMA),用于描述孔隙对放电等离子烧结(SPS)SiC_p/Al复合材料热导率的影响规律。

英文短句/例句

1.Influence of SiC_P reinforcement on corrosion behaviour of SiC_P/Al composites增强体SiC_P对SiC_P/Al复合材料腐蚀行为的影响
2.Tensile mechanical properties of SiC_P/Al compositesSiC_P/Al复合材料的拉伸性能
3.Influence of Particles Size-grading on Wear Performance of SiC_P/Al Composites颗粒级配对SiC_P/Al复合材料摩擦磨损性能的影响
4.Preparation and Thermal Expansion Propertise of SiC_P/Al Composites by Vacuum Pressure Infiltration Precess;真空压力浸渗法制备SiC_P/Al复合材料及热膨胀性能研究
5.Fabrication of nano-SiC_p/Al composite by high energy ball millingnano-SiC_p/Al复合材料的高能球磨制备工艺
6.Experiments of ultra-precision turning of SiC_p/Al compositesSiC_p/Al复合材料的超精密车削试验
7.Electromagnetic Centrifugal Casting of SiC_p Reinforced Al and Al-Cu Matrix Composites;电磁离心凝固SiC_p增强Al及Al-Cu基复合材料研究
8.The Research on Properties of SiC_p/Al Composite for Electronic Packaging;电子封装SiC_p/Al 复合材料性能及影响因素研究
9.Fabrication and Properties of SiC_p/Al Electrical Packaging Composites by Spark Plasma Sintering;SiC_p/Al电子封装复合材料的SPS烧结及性能研究
10.Studies on Preparation, Microstructures and Properties of the SiC_p/Al Composites;SiC_p/Al复合材料制备工艺和微结构及性能研究
11.Effect of Particle Size on the Damping Property of SiC_p/Al Composites颗粒尺寸对SiC_p/Al复合材料阻尼性能的影响
12.Effect of Si addition on the microstructure and thermo-physical of SiC_p/Al compositesSi含量对SiC_p/Al复合材料组织和性能的影响
13.Surface Observation and Analysis of the Milling Damage of Al/SiC_p CompositesAl/SiC_p复合材料铣削加工损伤形貌与分析
14.Effects of Hot Pressed Treatment on Microstructures and Thermal Properties of Spraying SiC_p/Al Composites热压对喷涂SiC_p/Al复合材料组织和热性能的影响
15.Effect of Isothermal Forging on Distribution of Particles of SiC_p/Al Composites等温锻造对SiC_p/Al复合材料颗粒分布的影响
16.Compressive property investigation of SiC_p/Al functionally gradient materialsSiC_p/Al功能梯度复合材料的压缩性能研究
17.Investigation on Cutting Temperature in Green Machining of SiC_p/Al Composites绿色切削SiC_p/Al复合材料的刀具温度研究
18.Research and Development on Thermal Conductivity of SiC/Al Composites Applied to Electronic Packaging电子封装SiC_p/Al复合材料导热性能研究与进展

相关短句/例句

Al SiC w/Al compositesAl-SiC_w/Al复合材料
3)B4C/Al compositesB4C/Al复合材料
1.The phase composition of B4C/Al composites fabricated by pressureless infiltration was analyzed,and th.分析了无压浸渗法所制备B4C/Al复合材料的相组成,并测试了其力学性能。
4)SiCp/Al MMCsSiCp/Al基复合材料
1.In order to analyze the weldability of SiC particle reinforced aluminum metal matrix composites(SiCp/Al MMCs),plasma arc in-situ welding of SiCp/Al MMCs was carried out using argon-nitrogen mixture as plasma gas with Ti-Mg mixed powder as in-situ material.为分析SiCp/Al基复合材料的焊接性,以Ti-Mg混合粉末作为填充材料,采用氮氩混合等离子气体对SiCp/Al基复合材料进行等离子弧原位焊接。
2.Plasma arc "in-situ" welding of SiCp/Al MMCs were carried out using argon-nitrogen mixture as plasma gases with Ti-Ni alloying as "in-situ" material.以Ti-Ni合金作为填加材料,采用氮氩混合等离子气对SiCp/Al基复合材料进行等离子弧原位焊接。
3.In this paper,SiCp/Al MMCs were selected as research objects,and process and mechanism of SiCp/6061Al MMCs by plasma arc welding(Ar and N2 as ionized gas, Ar as fielded gas) were systematically studied.研究表明填加Al-Si-Ti-Ni合金对SiCp/Al基复合材料进行等离子弧原位焊接,填加材料中Ti含量为5%时,可以有效抑制有害相Al_4C_3的生成,得到的焊缝组织较为致密,没有气孔、微观裂纹等缺陷,接头强度较之不加填充材料时有较大提高,达到226MPa,提高了接头的力学性能。
5)SiC_P/Al compositesSiC_P/Al复合材料
1.Study of electroless Ni plating with palladium-free activation on the surface of SiC_p/Al composites;SiC_p/Al复合材料表面无钯活化化学镀镍的研究
2.A simple model was introduced for describing the effect of porosity on the thermal conductivity of spark plasma sintered(SPS) consolidated SiC_p/Al composites in terms of an effective medium approximation(EMA) scheme.本文基于有效介质近似原理(EMA)提出一简易模型(MEMA),用于描述孔隙对放电等离子烧结(SPS)SiC_p/Al复合材料热导率的影响规律。
6)Al-Fe compositesAl-Fe复合材料