接触疲劳,contact fatigue英语短句,例句大全

接触疲劳,contact fatigue
1)contact fatigue接触疲劳
1.Effect of ceramic additive in lubricating oil on contact fatigue and wear performance of steel/steel friction pair;陶瓷润滑油添加剂对钢-钢接触疲劳及磨损性能的影响
2.Study on the contact fatigue resistance of Cr12V and Cr12MoV steels;Cr12V与Cr12MoV钢的接触疲劳性能研究
3.Factors to affect the contact fatigue performance;影响接触疲劳性能的因素

英文短句/例句

1.Influence of rolling contact fatigue loads on stress intensity coefficients of rail surface contact fatigue crack滚动接触疲劳载荷对铁轨表面接触疲劳裂纹应力强度系数的影响
2.Finite element analysis on the contact fatigue life of high speed angular contact ball bearings高速角接触球轴承接触疲劳寿命的有限元分析
3.Standard of test method for surface load capacity of gearsGB/T14229-1993齿轮接触疲劳强度试验方法
4.The Contact Fatigue and Wear Resistance of ADI奥贝球墨铸铁的接触疲劳与耐磨性能
5.Surface Contact Fatigue Failure Analysis on the Cam of CNG EngineCNG发动机凸轮表面接触疲劳失效分析
6.Research on effect of bearing steel contact fatigue lifeGCr15轴承钢的接触疲劳寿命影响因素
7.Study on Contact Fatigue Failure of Tractor Second Shaft Gear拖拉机二轴齿轮接触疲劳损坏的研究
8.Rolling contact fatigue of microalloying case carburized gear steels微合金化渗碳齿轮钢的接触疲劳性能
9.Metallic materials-Rolling contact fatigue testGB/T10622-1989金属材料滚动接触疲劳试验方法
10.Spalling was a major form of contact fatigue failures in nitriding steel.氮化钢的主要接触疲劳破坏形式是剥落。
11.On the Mechanism of Dynamic Detection of Contact Fatigue Cracks by Eddy--Current Testing涡流法动态检测接触疲劳裂纹机理研究
12.Rolling Contact Fatigue Life of Silicon Nitride Ceramic Balls;氮化硅陶瓷球的滚动接触疲劳寿命研究
13.Analysis on Several Key Technologies of the Gear Contact Fatigue Test;齿轮接触疲劳试验中若干关键技术的研究
14.Study of the Effect of Lubricant s Viscosity on Geared Fatigue Life;润滑油粘度对齿轮接触疲劳寿命影响的研究
15.Cause Analysis on the Lower Contact Fatigue Strength of Nitrided Part渗氮件接触疲劳强度不够高的原因分析
16.Investigation of Contact Fatigue Mechanism of Plasma Spraying Fe-based Coating等离子喷涂铁基涂层的接触疲劳失效机理研究
17.Experimental Study on Signal Response of Contact Fatigue Failure of Sprayed Coating喷涂层接触疲劳失效信号响应试验研究
18.Cause for Short Contact Fatigue Life of S55C Ball Bearing SteelS55C轴承钢滚动接触疲劳寿命较低原因分析

相关短句/例句

thermo-contact fatigue热接触疲劳
1.Development of the high temperature sliding wear and thermo-contact fatigue testing machine;高温滑动磨损与热接触疲劳试验机的开发
3)rolling contact fatigue滚动接触疲劳
1.Effects of surface defects on rolling contact fatigue in 10Cr4Ni4Mo4V;预制表面缺陷对钢滚动接触疲劳性能的影响
2.Rolling Contact Fatigue Life of Silicon Nitride Ceramic Balls;氮化硅陶瓷球的滚动接触疲劳寿命研究
3.Influence of rolling contact fatigue loads on stress intensity coefficients of rail surface contact fatigue crack滚动接触疲劳载荷对铁轨表面接触疲劳裂纹应力强度系数的影响
4)rolling contact fatigue method滚动接触疲劳法
1.The adhesion property of Au/NiCr/Ta multi-layered metallic films was investigated by the indentation method,rolling contact fatigue method and scratch method with both friction and acoustic emission modes.针对Al2O3基体上磁控溅射沉积的Au/NiCr/Ta多层金属薄膜,用压痕法、滚动接触疲劳法、摩擦力和声发射两种模式同时监测的划痕法,对比研究了金属薄膜与基体的结合性能。
5)Contact Fatigue Life接触疲劳寿命
1.Metallurgical Quality and Contact Fatigue Life of Bearing Steel Produced by Continuous Casting and Ingot Casting;连铸和模铸轴承钢的冶金质量及接触疲劳寿命
2.The steel by deep nitriding possessed excellent microhardness gradient and favorable distribution of residual compressive stresses,and the contact fatigue life of nitrided steel under the given load showed a great improvement in relation to carburized 18CrNi4A steel.深氮化试件具有优良的硬度梯度和残余压应力分布,与渗碳件相比接触疲劳寿命提高3。
3.The end queching curve,the grain size of austenite and the contact fatigue life of different steels used for cold roll were measured.测定了不同冷轧辊用钢的端淬曲线、奥氏体晶粒度和接触疲劳寿命,结果表明:新型冷轧辊用钢的淬透深度达35~40 mm,且具有低的过热敏感性和高的接触疲劳寿命。
6)contact fatigue properties接触疲劳性能
1.The comparative study of contact fatigue properties between the n-SiO2/Ni coating and the nickel coating prepared by electro-brush plating was carried out by means of microstructure characterization and taking account of effect of heat treatment on it.用电刷镀技术制备了n-SiO2/Ni复合刷镀层,分析了复合镀层的微观组织,测试了该镀层的接触疲劳性能,考察了热处理对组织和接触疲劳性能的影响,并与纯镍镀层进行了对比。