冲蚀磨损,erosion wear英语短句,例句大全

冲蚀磨损,erosion wear
1)erosion wear冲蚀磨损
1.Effect of erosion wear on epoxy bond coating with nanometer fillers;纳米填料对环氧胶粘涂层冲蚀磨损性能的影响
2.Study on erosion wear properties of epoxy adhesive coating;环氧胶粘涂层冲蚀磨损特性研究
3.Analyses of erosion wear characteristic and structure research on hydraulic valve;液压阀冲蚀磨损特性分析与结构探讨

英文短句/例句

1.Solid-Liquid Two-Phase Flow Erosion Wear Properties of Si_3N_4-SiC CompositeSi_3N_4-SiC复相耐磨材料的冲蚀磨损性能
2.Study on erosion resistant nano epoxy adhesive coating环氧胶粘纳米涂层冲蚀磨损性能研究
3.Development of Nickel-Base Cored Wire Against Corrosion and Erosion at Elevated Temperature;抗高温冲蚀磨损镍基粉芯线材的研制
4.The Study of Erosion Resistance of Nanostructured WC-Co Coatings;纳米WC-Co涂层抗冲蚀磨损研究
5.Research on the Erosion Wear of Reactive Sintering Silicon Carbide;反应烧结SiC陶瓷冲蚀磨损性能研究
6.Research on the Coupling Characteristics of Anti-Erosive Wear of Desert Lizard;沙漠蜥蜴耐冲蚀磨损耦合特性的研究
7.Study on Erosion-Wear Resistance of Carbon Steel and Stainless Steel碳钢不锈钢材料抗冲蚀磨损性能研究
8.Effect of Different Abrasive Particle Hardness on Erosion Resistant Performance of ZTA Structure Ceramics不同磨粒对ZTA结构陶瓷冲蚀磨损性能的影响
9.Investigation of erosion properties of particle reinforced epoxy wear resistant coating颗粒增强环氧耐磨涂层的冲蚀磨损特性研究
10.Preparation and Solid-Liquid Erosive Wear Property of Sialon-Sic Ceramic CompositeSialon-SiC耐磨陶瓷的制备及液固冲蚀磨损性能研究
11.The results show that the abrasion of coatings was influenced by many factors, such as attack angle, impact speed, and abradant dosage etc.结果表明 :涂层的冲蚀磨损受到攻角、冲速、磨料量等多种因素的影响。
12.Slurry Erosion Resistance of Alundum Reinforced Polymer Composite Material;刚玉增强聚合物复合材料冲蚀磨损性能的研究
13.Study on Structure and Property of the Erosion-resistant Alloys at High Temperature;抗高温冲蚀磨损合金组织与性能的研究
14.Research on the Slurry Erosion Wear of SiC Particles Reinforced Steel Matrix Surface Composite Material;SiC/钢基表面复合材料冲蚀磨损性能研究
15.The Study of Test Method of Erosion Resistance of Refractory at High Temperatures;耐火材料高温耐冲蚀磨损性能试验方法研究
16.Research on Erosion Wear Mechanisms of Ceramic Sandblasting Nozzles Using FEA Methods;基于有限元法的陶瓷喷砂嘴冲蚀磨损机理研究
17.Erosion Wear Behavior of Slotted Screen Liner for Sand Control石油防砂割缝筛管的冲蚀磨损性能研究
18.A Study of Low-stress Washing Abrasive Wear of W-alloy White Cast Irons钨系合金白口铸铁低应力冲蚀磨料磨损的研究

相关短句/例句

erosion[英][i'r?u??n][美][?'ro??n]冲蚀磨损
1.Study on Erosion Wear Mechanisms of WC-Co Coatings Prepared by Supersonic Plasma Spraying;超音速等离子喷涂WC-Co涂层的冲蚀磨损机理研究
2.The study of erosion resistance of sprayed nickel based alloy coating under the impacting of coke partcles;镍基喷涂层抗焦粒冲蚀磨损性能的研究
3)erosive wear冲蚀磨损
1.The results show that the erosive wear resistances of the two heat treated Cr-Mn-Cu alloy white cast iron materials are 1.以铸态铬锰铜合金白口铸铁为对比材料,考察了热处理后的铬锰铜合金白口铸铁的抗冲蚀磨损性能,并对试验材料的冲击断口形貌、抗冲蚀磨损失效机理和冲蚀磨损横切面的金相组织进行了分析。
2.The goal of this research was to identify the relationship between composition and mechanical properties of clay toughened epoxy resins and their erosive wear resistance.研究了粘土改性环氧树脂的浆液体冲蚀磨损性能。
3.The goal of this research is to identify the relationship between composition and mechanical properties of polyurethane (PU) toughened epoxy resins and their erosive wear resistance.研究了聚氨酯(PU)增韧环氧树脂(EP)的浆液体冲蚀磨损性能。
4)Abrasion[英][?'bre??n][美][?'bre??n]冲蚀磨损
1.It has been investigated that the influnce of the component's forming and physics properties of the materials on the mechanism of abrasion of the test composite materials.探讨了材料组分及形态、材料物理性能等因素对环氧树脂基复合材料冲蚀磨损机理及抗磨性能的影响，研究表明，树脂基复合材料的冲蚀磨损以表面粒子剥落和开裂剥落为主，材料的抗磨性主要受其内聚力及填料形状和粒度的影响。
2.The high temperature abrasion resistance as well as its mechanism of the CrB coating was studied through field test,which was done by depositing the coating on the surface of the water-wall tubes in a circulating fluidized bed boiler.用超音速电弧喷涂方法制备CrB颗粒增强的MMC涂层,利用金相显微镜、扫描电镜(SEM)及电子探针(EPMA)分析方法,对涂层的微观组织及微区成分进行分析;在实际循环流化床锅炉水冷壁上进行现场试验以检测涂层的耐高温冲蚀磨损性能,对涂层冲蚀表面的微观形貌进行分析,研究涂层的耐磨机理。
3.The correlative studies on erosive wear rules in two-phase flow experiment conditiion,numerical simulation and numerical prediction on the two-phase flow abrasion,and optimization of anti-abrasive design of hy.工作在固液两相流条件下的水力机械普遍存在破坏程度不一的冲蚀磨损作用 ,给工程实践和经济效益带来严重的阻碍和巨大的损失。
5)erosion resistance冲蚀磨损
1.Study on microstructure and erosion resistance of Al_2O_3 reinforced Ni-base alloy coating;氧化铝增强镍基合金涂层的组织与耐冲蚀磨损性能研究
2.Metallographic examination, hardness and erosion resistance tests showed that the softer the austenite or austenite + martensite surfacing layers, the better erosion resistance at large angle erosion; while surfacing layers with small amounts of precipitat.通过金相分析、硬度测定和冲蚀磨损试验,表明堆焊层主要为奥氏体或奥氏体+马氏体组织,堆焊层硬度较低,具有良好的抗大角度冲蚀磨损性能。
3.Mechanisms and erosion resistance of pressless (PL) sintered SiC, hot-pressed (HP)SiC, hot-isostatic-pressed (HIP) SiC ceramics are discussed in this paper.研究了无压（PL）；热压（HP），热等静压（HIP）同烧结SiC陶瓷的室温冲蚀磨损行为热等静压SiC陶瓷具有良好的综合力学性能和细致的组织结构，其冲蚀磨损耐磨性比无压和热压烧结SiC陶瓷要
6)abrasion[英][?'bre??n][美][?'bre??n]磨损冲蚀