1)heat treatment temperature热处理温度
1.Effects of heat treatment temperature on the preparation of nanometer TiO_2 by melt-phase separation process;热处理温度对熔融分相法制备纳米TiO_2影响的研究(英文)
2.Study on heat treatment temperature of EMD used for Li-MnO_2 batteries;Li-MnO_2电池用EMD热处理温度的研究
3.Influence of heat treatment temperature after the pressure expansion on the electromechanical properties of cellular polypropylene electret;压力膨化后的热处理温度对PP蜂窝膜驻极体机电性质的影响
英文短句/例句
1.Effect of Heat Treatment Temperature on Properties of Lightweight Castable热处理温度对轻质浇注料性能的影响
2.Influences of Grain and Heat Treatment Temperature on Properties of Phosphate Products粒度和热处理温度对磷酸盐制品性能的影响
3.Effect of annealing temperature and cooling rate on the properties of sol-gel derived ZnO:Al thin films热处理温度及冷却速度对ZnO:Al薄膜性能的影响
4.Influence of Heat Treatment Temperature on Microstructure and Micro-hardness of Deposited Metal热处理温度对熔敷金属组织及其硬度的影响
5.Research on Heat Treatment Temperature Measure & Control System for Forging Steel Crankshaft on a Large Scale;大规模锻钢曲轴热处理温度测控系统的研制
6.Effect of Heat Treatment Temperature on Property of Bauxite Based Spray Coatings热处理温度对铝矾土基喷涂料性能的影响
7.Effect of Heat Treatment Temperature on Property of Mullite-Bauxite Castable Refractory热处理温度对莫来石-铝矾土浇注料性能的影响
8.Effect of Heat Treatment Temperature on Properties of Calcined Flint Clay-Bauxite Castable Refractory热处理温度对焦宝石-铝矾土浇注料性能的影响
9.Relationship between preoxidized PAN fiber structure and heat treatment temperaturePAN预氧化纤维结构与热处理温度的关系
10.Study on heat-treatment temperature of ZnO nanoparticles synthesized by precipitation method沉淀法合成ZnO纳米粒子热处理温度的研究
11.Influence of Heat Treatment Temperature on High Calcium Fly Ash's Volume Stability热处理温度对高钙灰体积安定性的影响
12.Detection of Heating Endpoint Temperature for Fish by SDS-PAGE MethodSDS-PAGE电泳法检测鱼肉热处理终点温度
13.Study on aging temperature of ZL210A casting aluminum alloyZL210A铸造铝合金热处理时效温度的研究
14.Furnace and Thermal Processes- Equipment with a temperature gauge used for processing wafers. A constant temperature is required for the process.炉管和热处理-温度测量的工艺设备，具有恒定的处理温度。
15.Analysis and Treatment of Temperature Deviation of High Temperature Superheater Tube Wall of 410t/h Boiler410t/h锅炉高温过热器管壁温度偏差的分析处理
16.Selection and Adjustment for Heat Treatment Temperature of Mild Structural Alloy Steel低碳合金结构钢热处理加热温度的选择与调整
17.Effects of temperature and holding time on the semi-solid isothermal heat-treated microstructure of ZL104 aluminum alloy等温温度和时间对ZL104铝合金半固态等温热处理组织的影响
18.When general considerations are discussed, thermal processes are expressed as timeemperature relationships.从全面考虑,热处理用时间温度的关系表述。
相关短句/例句
heat-treatment temperature热处理温度
1.Influence of heat-treatment temperature on the properties of YSZ electrolyte film prepared by magnetron sputtering;热处理温度对磁控溅射法制备YSZ电解质薄膜性能的影响
2.Study on heat-treatment temperature of ZnO nanoparticles synthesized by precipitation method沉淀法合成ZnO纳米粒子热处理温度的研究
3.The influence of heat-treatment temperature on the structure and mechanical properties of PAN-based carbonfiber has been investigated,which provides a theory basis for further raising of the mechanical properties ofcarbon fiber.考察了热处理温度对ＰＡＮ基碳纤维结构和力学性能的影响，为进一步提高碳纤维的力学性能提供了理论依据。
3)Annealing temperature热处理温度
1.The Sn-doped In_2O_3 thin films were prepared on the glass substrates at different annealing temperatures by sol-gel method with InCl_3·4H_2O and SnCl_4·5H_2O as precursors.采用溶胶-凝胶法以铟、锡氯化物为前驱物制备不同热处理温度下的ITO膜,对制备的ITO膜样品进行X射线衍射分析。
2.The structural development, spectroscopic of these films with increasirlg annealing temperature have been investigated using XRD,FT - IR anti - reflection spectra, Raman scattering spectra and atomic force microscopy (AFM).用XRD、FT－IR反射光谱、Raman光谱以及原子力显微镜（AFM）研究了薄膜随热处理温度的结构变化过程以及薄膜中有机物的挥发。
4)heating temperature热处理温度
1.The influences of precursor,oxygen pressure and heating temperature on the microstructure and properties of the thin films have been discussed.综述了采用软化学方法制备VO2薄膜的工艺技术特点,以前驱物的划分为主线,着重探讨了前驱物的选择、氧分压和热处理温度等工艺条件对其物相结构与性能的影响,对反应热力学进行了初步的探讨。
5)Thermal treatment technology热处理温度制度
6)heat treatment temperature window热处理温度窗口
延伸阅读
橡胶热处理分子式：CAS号：性质：胶料以较高温度在混炼之初加热一段时间，以利于配合剂的分散，或者有益于提高硫化胶的物理性能，这种操作谓之橡胶热处理。例如，丁基橡胶有冷流性，内聚力低，不易包辊，可先行加入热处理剂(如对二亚硝基苯1～1.5份)，再在直接蒸汽或热空气中(150℃左右)加热2～4h。或是在密炼机中投入生胶后即加热处理剂，胶温升至120～200℃进行热处理。又例如乙丙橡胶经热处理可提高硫化胶的物理性能，硅橡胶及氟橡胶的第二段硫化是在热烘箱中以200℃左右的高温空气中加热6～24h，也是一种热处理工艺。
