TRIP钢,TRIP steel英语短句,例句大全

TRIP钢,TRIP steel
1)TRIP steelTRIP钢
1.Hot deformation and subsequent austempering of TRIP steel;TRIP钢热变形等温淬火
2.Advance in Research on Evolution of Structure in TRIP Steels during TMP and Heat Treatment;TRIP钢TMP和热处理过程中的组织演变
3.A study of microstructure of high strength cold-rolled TRIP steel using EBSD techniques;高强度冷轧TRIP钢显微组织的EBSD研究

英文短句/例句

1.Study on the Microstructures and Mechanical Properties of CMnAl-TRIP Steels;CMnAl-TRIP钢组织性能的研究
2.Properties of Laser Welded Vanadium-added TRIP Steels激光焊接含钒TRIP钢的组织和性能
3.Microstructure and Mechanical Properties of TRIP Steel Containing Nb含铌TRIP钢的组织与力学性能研究
4.STUDY ON AXIOTAXY IN HIGH MANGANESE TRIP STEEL BY EBSDEBSD研究高Mn TRIP钢伪线织构
5.Study on Working-hardening Behaviour of TRIP-assisted Steels During Plastic DeformationTRIP钢塑性变形时加工硬化行为研究
6.Research on Microstructure Evolution Laws of Low-C-Si-Mn TRIP Steels低碳-硅-锰系TRIP钢的组织演变规律研究
7.Cutting Technology of Disc Shear for 80 kg Grade TRIP Steel Plate80kg级TRIP钢带圆盘剪剪切工艺
8.Influence of Substitution of Al for Si on Mechanical Properties of TRIP Steel以A1代Si对TRIP钢力学性能的影响
9.Microstructure and mechanical properties of CMnAlCu-TRIP steelCMnAlCu-TRIP钢组织和力学性能研究
10.Microstructure Evolution of Low-Carbon Si-Mn TRIP Steel During Step CoolingTRIP钢在分段冷却过程中的相变行为
11.MICROSTRUCTURE AND MECHANICAL PROPERTIES OF TRIP STEEL CONTAINING VANADIUM AND TITANIUM含钒钛TRIP钢的组织和力学性能研究
12.Heat Treatment Process and Performance Analysis of Martensite TRIP Steel;马氏体基体TRIP钢的热处理工艺与性能分析
13.Review on the Relation between Heat Treatment and Retained Austenite Formation of Cold Rolled TRIP-aided Steels冷轧TRIP钢的热处理与残留奥氏体形成的关系
14.Microstructure and Stability of Retained Austenite in a High Al-Containing TRIP Steel高铝TRIP钢的微观组织与残余奥氏体稳定性研究
15.Analysis on microstructure and properties of low Si and high Al cold rolled TRIP steel低Si和高Al冷轧TRIP钢的组织和性能分析
16.Relation between Processing and Retained Austenite Formation of Hot Rolled TRIP-aided Steels热轧TRIP钢的加工工艺与残余奥氏体形成的关系
17.Microstructure and mechanical properties of hot rolled C-Mn-Si TRIP steel based on dynamic transformation基于动态相变热轧C-Mn-Si系TRIP钢的组织及性能
18.Research on TRIP steel with Nb and Mo by thin slab casting and rolling process薄板坯连铸连轧Nb-Mo微合金TRIP钢的研究

相关短句/例句

TRIP steelsTRIP钢
1.Feasibility analysis of producing hot rolled TRIP steels using TSCR process;薄板坯连铸连轧生产热轧TRIP钢可行性分析
2.Effects of different alloying elements on TRIP steels were described in detail and the processing applied respectively to hot rolled and cold rolled TRIP steels was introduced in order to offer information for trial production of TRIP steels.为了给TRIP钢的试制提供参考,对各种合金元素在TRIP钢中的作用进行了描述,并介绍了热轧和冷轧TRIP钢的处理工艺。
3.Static softening between passes of TRIP steels A and B was measured by double-pass compression test.B两种TRIP钢进行了软化率曲线的测定。
3)hot rolled TRIP steel热轧TRIP钢
4)Al Containing TRIP Steel含铝TRIP钢
5)Si-free TRIP steel无硅TRIP钢
1.Bainite, ferrite and a large amount of stably retained austenite were obtained through austempering immediately after intercritical annealing of Si-free TRIP steel.无硅TRIP钢采用临界区加热等温淬火热处理,获得铁素体,贝氏体及大量稳定残余奥氏体的三相组织·通过对其显微组织观察,断口形貌分析,与高硅TRIP钢力学性能的相互比较,探讨了无硅TRIP钢相变诱发塑性的行为·结果表明:无硅TRIP钢在拉伸变形过程中,应变诱导相变,相变诱发塑性;其拉伸断口形貌呈韧性断口特征;经790℃加热在400℃等温5min时,抗拉强度达到754MPa,延伸率达到36%,综合性能(强塑积)达到27144MPa%的最高值
6)SiMn TRIP steel硅锰TRIP钢
1.6×10-6s-1, total elongation of the high carbon SiMn TRIP steel increased from 14%～15% to about 22%; yield strength increased from 1 015MPa to 1 198MPa, and tensile strength from 1 448MPa to 1 546MPa, the volume fraction of retained austenite in tensile specimens was reduced.68Mn高碳硅锰TRIP钢室温低应变速率下的拉伸性能。