1)cyclic deformation循环形变
1.Tensile behaviors of ultrafine grained copper (UFG-Cu) processed by equal channel angular pressing (ECAP) were investigated at room temperature in the as-processed state and after cyclic deformation treatment.研究了循环形变处理对等通道转角挤压方法(ECAP)制备的超细晶铜(UFG—Cu)室温拉伸行为的影响。
2.A study has been performed relating to the micromechanisms of cyclic deformation in polycrystalline copper and aluminium under low cycle impact fatigue (LCIF) loading.对面心立方结构多晶纯铜和纯铝在低周冲击疲劳载荷下循环形变的微观机制进行了研究。
3.It was shown that the appearance ofDBs seems to be a general phenomenon in difFerently oriented crystals during cyclic deformation.系统研究了循环形变铜单晶体中宏观形变带的产生规律和特征及相应的位错结构，并对其形成机制进行了综合探讨。
2)cyclic deformation循环变形
1.Numerical relationship between hardness and microstructure of JLF-1 steel after cyclic deformationJLF-1钢高温循环变形后硬度与微观结构的数值关系
2.To investigate the microstructural stability,stress-strain response and fatigue fracture of a new generation γ-TiAl alloy with high Nb content under cyclic deformation,Low aycle fatigue tests under total strain controlling were carried out in the temperature range of 550℃～750℃ Deformed microstructures and fatigue fracture surfaces were observed.为研究新一代高Nb含量γ-TiAl合金在低周疲劳过程中双态组织稳定性对应力-应变响应和疲劳断裂过程的影响,测试了Ti-47Al-5Nb合金在总应变控制条件下550℃～750℃温度范围的低周疲劳性能,并观察了循环变形后的显微组织,缺陷特征和断口形貌。
3.The monotonic tensile and uniaxial cyclic deformation behaviors of the SiC_p/6061A1 alloy composites were simulated numerically by using elastic-plastic finite element code ABAQUS, and the simulated results were compared with the corresponding experiments in order to discuss the reasonability of the finite element simulation.在细观分析模型的基础上,利用ABAQUS有限元程序对T6热处理后不同体积分数的颗粒增强SiC_p/6061Al合金复合材料的单调拉伸行为和单轴循环变形行为进行了有限元数值模拟；同时,通过与相应的实验结果的比较对模拟效果进行了评价。
英文短句/例句
1.High-temperature cyclic deformation and damage behavior of ultrafine-grained copper超细晶铜的高温循环变形及损伤行为
2.Cyclic Deformation Behavior and Fatigue Damage Mechanism of Copper Bicrystals;铜双晶体的循环变形行为与疲劳损伤机制
3.Study on Bauschinger Effect of Zircaloy-4 during Cyclic Deformation;Zr-4合金在循环变形过程中的Bauschinger效应研究
4.Effect of cyclic deformation at elevated temperature on microstructure of steel JLF-1高温循环变形对JLF-1钢微观结构的影响
5.Cyclic accumulative deformation of bucket foundation on soft clay strata软土地基桶形基础循环累积变形研究
6.On the deformation of soft clay subjected to cyclic loading循环荷载作用下软黏土变形特性研究
7.Study of deformation of rock salt under cycling loading and unloading循环加、卸载下盐岩变形特性试验研究
8.Experimental study on shearing deformation behavior of saturated clay under cyclic stress循环应力下饱和黏土剪切变形特性试验研究
9.Analysis and Calculation of Tooth Shape for Recirculating Ball Type Variable-Ratio Steering Gear变速比循环球式转向机的齿形分析与计算
10.A Study on Cyclic Shear Behavior and Softening Deformation of Saturated Clay;饱和黏土循环剪切特性与软化变形的研究
11.Experimental Research on Deformation Characteristics of Rock under Cyclic Loading;循环载荷作用下岩石变形特性的试验研究
12.Long Term Cumulative Deformation of Silt Induced by Repeated Loading粉土在循环荷载作用下的累积变形研究
13.Experimental Study on Cumulative Deformation of Silty Sand Roadbed under Repeated Loading循环荷载作用下粉砂土路基累积变形试验研究
14.Analysis of dynamic strength and deformation of Wenzhou overconsolidated soft clay under cyclic loading循环荷载下温州超固结软土动强度与变形分析
15.TEST STUDY ON DEFORMATION FIELD EVOLUTION OF ROCK MATERIAL UNDER CYCLIC LOAD循环载荷作用下岩石材料变形场演化试验研究
16.STUDY ON STRENGTH AND DEFORMATION OF PLASTIC CONCRETE UNDER CYCLIC LOADING AND UNLOADING循环加卸载下塑性混凝土强度及变形特性
17.Effect of Liquefaction on Cyclic Deformation of Soil Layers循环荷载下液化对土层水平往返变形的影响
18.Study on Elastic Deformation Limit and Cyclic Fatigue Test of Cobalt-chromium Alloy Cast Clasps;钴铬合金铸造卡环弹性形变限度及循环疲劳的研究
相关短句/例句
cyclic deformation循环变形
1.Numerical relationship between hardness and microstructure of JLF-1 steel after cyclic deformationJLF-1钢高温循环变形后硬度与微观结构的数值关系
2.To investigate the microstructural stability,stress-strain response and fatigue fracture of a new generation γ-TiAl alloy with high Nb content under cyclic deformation,Low aycle fatigue tests under total strain controlling were carried out in the temperature range of 550℃～750℃ Deformed microstructures and fatigue fracture surfaces were observed.为研究新一代高Nb含量γ-TiAl合金在低周疲劳过程中双态组织稳定性对应力-应变响应和疲劳断裂过程的影响,测试了Ti-47Al-5Nb合金在总应变控制条件下550℃～750℃温度范围的低周疲劳性能,并观察了循环变形后的显微组织,缺陷特征和断口形貌。
3.The monotonic tensile and uniaxial cyclic deformation behaviors of the SiC_p/6061A1 alloy composites were simulated numerically by using elastic-plastic finite element code ABAQUS, and the simulated results were compared with the corresponding experiments in order to discuss the reasonability of the finite element simulation.在细观分析模型的基础上,利用ABAQUS有限元程序对T6热处理后不同体积分数的颗粒增强SiC_p/6061Al合金复合材料的单调拉伸行为和单轴循环变形行为进行了有限元数值模拟；同时,通过与相应的实验结果的比较对模拟效果进行了评价。
3)cycles-deformation循环-变形
4)circular deformation behavior循环变形行为
1.The result shows that, the circular deformation behavior of two-phase steel not only relates to the evolutional process of the dislocation configuration of the microstructure, but also is affected by the intensity, type and loading modes of the circular load.结果表明 ,双相钢的循环变形行为 ,不仅与组织中位错组态的演变过程有关 ,同时也受循环载荷大小、类型以及加载方式所影响。
5)Stochastic cyclic deformation随机循环变形
6)low temperature cyclic deformation低温循环变形
延伸阅读
循环系统的进化鱼的循环系统
