板翅式回热器,Plate-fin recuperator
1)Plate-fin recuperator板翅式回热器
1.Investigations on heat transfer performance of a plate-fin recuperator;板翅式回热器传热性能研究
2.Numerical simulation and experimental study on plate-fin recuperator in microturbine板翅式回热器试验与数值模拟研究
3.A lumped parameter model was proposed to research dynamic performances of plate-fin recuperator in high-temperature gas-cooled reactor with direct helium turbine cycle(HTGR-GT).针对高温气冷堆直接氦气透平循环中的板翅式回热器,研究提出一仅考虑回热器芯部热容的集总参数模型,即无限大芯部热容的集总参数模型,并利用四阶龙格-库塔方法求解该模型,求解过程中考虑温度对气体物性的影响。
2)Plate-finned heat recovery equipment板翅式热回收器
3)Plate-fin heat exchanger板翅式换热器
1.Dynamic performance simulation of plate-fin heat exchangers in small scale MRC-LNG plant;小型MRC天然气液化装置中板翅式换热器动态特性仿真研究
2.Research progress of plate-fin heat exchanger in china;板翅式换热器的研究进展
3.Three dimensional numerical simulation on surface performance of a plate-fin heat exchanger.;板翅式换热器翅片表面性能的三维数值模拟
英文短句/例句

1.Experimental Study on Processing Quality of Fins in Plate-fin Heat Exchanger;板翅式换热器翅片加工质量的实验研究
2.Performance Analysis and Experimental Study of Plate-Fin Heat Exchanger;板翅式换热器的性能分析与实验研究
3.Fluid Flow Distribution and Heat Transfer in Plate-Fin Heat Exchangers;板翅式换热器物流分配特性及换热的研究
4.Experimental study on thermal performance and pressure drop characteristic of plate-fin heat exchanger板翅式换热器的热工性能和压阻特性实验研究
5.The plate-fin beat exchanger is one of our characteristic products.铝制板翅式换热器是我公司的一大特色产品。
6.Analysis of frequent troubles in plate-fin heat exchangers employed by 1500m~3/h ASU and solutions“1500”空分板翅式换热器频繁故障的分析及处理
7.Applications of the Comprehensive Performance Optimum in the Design of Plate-Fin Heat Exchangers综合性能优化在板翅式换热器设计中的应用
8.Flow distribution properties of header configuration in plate-fin heat exchangers板翅式换热器封头结构的物流分配特性
9.Experimental Study and Numerical Simulation on Surface Performance of Plate-fin Heat Exchanger;板翅式换热器翅片表面性能试验研究与数值模拟
10.Study on Numerical Simulation of Fluid Flow and Heat Transfer of Plate-Fin Heat Exchangers in Equipment LNG5;LNG5设备中板翅式换热器流动与传热数值模拟研究
11.The flow maldistribution parameter S decreases from 1.210 to 0.209 and the ratio of the maximum velocity to the minimum decreases from 23.163 to 1.756.此研究结果对于板翅式换热器的优化设计具有重要意义。
12.Experimental Research on Fatigue Failure of Tig Welded Joint in Aluminum Alloy Plate-Fin Heat Exchanger;铝合金板翅式换热器氩弧焊接头疲劳断裂试验研究
13.Analysis of Air Channel Blockage in the High-pressure Plate-fin Heat Exchanger for Internal-compression Air Separation Unit内压缩流程空分设备高压板翅式换热器空气通道堵塞的分析
14.Research on the method for calculating allowable external pipe load applied to brazed aluminum heat exchanger based on limit analyse基于极限分析的铝板翅式换热器封头许用接管载荷计算方法研究
15.Hangzhou Hangyang Co., LTD, which is the largest base for manufacturing plate-fin heat exchanger in China, has acceded to the advanced ranks of heat exchanger manvfacturing industry.杭氧作为中国最大的板翅式换热器生产基地,已步入世界换热器制造业的先进行列。
16.fin-tube coil heat exchanger翅状盘管式热交换器
17.The Energy Saving Analysis of Using Plate-fin Total Heat Exchangers in a Typical Building;典型建筑使用静止型板翅式全热交换器的节能研究
18.Analysis of the Applicability of Membrane-based Energy Recovery Ventilators in Different Climatic Zones of China;板翅式全热交换器在不同地区应用的适用性分析
相关短句/例句

Plate-finned heat recovery equipment板翅式热回收器
3)Plate-fin heat exchanger板翅式换热器
1.Dynamic performance simulation of plate-fin heat exchangers in small scale MRC-LNG plant;小型MRC天然气液化装置中板翅式换热器动态特性仿真研究
2.Research progress of plate-fin heat exchanger in china;板翅式换热器的研究进展
3.Three dimensional numerical simulation on surface performance of a plate-fin heat exchanger.;板翅式换热器翅片表面性能的三维数值模拟
4)plate-fin heat exchanger铝板翅式换热器
1.Experimental Investigation of surface performance of aluminum fins on plate-fin heat exchanger;铝板翅式换热器翅片表面性能的试验研究
5)Plate Fin Heat Exchanger板翅式换热器
1.Efficiency study of plate fin heat exchanger with principle of field synergy;场协同下板翅式换热器效率的研究
2.A technical development of developing, designing and manufacturing of plate fin heat exchanger for petroleum and chemical engineering are described.阐述石油化工板翅式换热器的开发设计和制造技术进展。
3.The flow nonumiformity and effects of different distributior s configuration on flow distribution performance in plate fin heat exchanger was studied.分析了不同结构导流片对板翅式换热器内部物流分配不均匀性的影响 ,通过改变导流片的内部结构 ,对其导流性能进行了研究 。
6)plate-fin heat exchangers板翅式换热器
1.Based on the study of the flow maldistribution in (plate-fin) heat exchanger,the effect of staggered(perforated) plate header configuration on outlet flow and heat transfer in plate-fin heat exchangers was experimentally studied.在对板翅式换热器内部物流分配研究的基础上,研究了错排孔板型结构封头对板翅式换热器出口流动与换热的影响。
2.This general solution can be used to analyze the dynamic response of plate-fin heat exchangers by simplifying the dynamic behavior of fins with Pingaud model.应用Pingaud模型对板翅式换热器翅片的动态特性进行简化,从而使该通用解可用来求解多股流板翅式换热器的动态特性。
延伸阅读

板翅式热交换器(platewingheatexchanger)板翅式热交换器(platewingheatexchanger)铝制板翅式热交换器是在数层平金属板之间紧密地放置波纹状的金属导热翅片,并在每一层的四周加上封条,于温度近600℃的盐溶液炉中整体铅焊而成。翅片的主要作用是强化传热,也有增强两金属板强度的作用,在这种热交换器中相邻两通道之间的热交换,一部分通过平板传递热量,但绝大部分热量是通过波纹翅中传递的,因为平板之间均有波纹翅片,因而大大增加了传热面积,所以它的单位体积内的传热面积比一般管式热交换器大10倍以上,达到4000~5000m2/m3。通过各通道之间的不同组合,可得到逆流、错流等形式的热交换器。它具有单位体积传热面积大、传热效率高、流体阻力小、热容量小、结构紧凑及同时允许几种介质进行热交换等优点。