燃料试验,fuel test
1)fuel test燃料试验
英文短句/例句

1.Research on Direct Injection Diesel Engine Burning Bio-diesel Mixed Fuelby Experiment直喷式柴油机燃用生物柴油混合燃料试验研究
2.high temperature experimental subassembly高温试验燃料分组件
3.fuel assembly stability test燃料集合体稳定性试验
4.Study on Test Method for Fuel Consumption on Gas Automobile;燃气汽车燃料消耗量试验方法的研究
5.Experimental Research on G180 Diesel Engine Burning MethanolG180柴油机燃用甲醇燃料的试验研究
6.Combustion Characteristics Test of Combustible Solid Compound Fuel可燃固废复合燃料的燃烧性能试验研究
7.Grate Firing Characteristics of Typical Biomass Fuels典型生物质燃料层燃燃烧特性的试验研究
8.Experimental study on the combustion and flow process in a scramjet with strut injector超燃冲压发动机支板喷射燃料的燃烧过程试验
9.Knock test reference fuels-Reference fuel-n-HeptaneGB/T11117.2-1989爆震试验参比燃料参比燃料正庚烷
10.Knock test reference fuels-Reference fuel-iso-OctaneGB/T11117.1-1989爆震试验参比燃料参比燃料异辛烷
11.Knock test reference fuels-Reference fuel grade tolueneGB/T11117.3-1989爆震试验参比燃料参比燃料级甲苯
12.The Influence of Aviation Fuel Water Reaction Test Condition on Test Result航空燃料水反应试验条件对试验结果的影响
13.Test method for flammability of cellular plastics--Horizontal burning methodGB/T8332-1987泡沫塑料燃烧性能试验方法水平燃烧法
14.Experimental Study on the Control of HCCI Combustion and Emissions by Means of Fuel Design Concept;燃料设计控制HCCI燃烧与排放的试验研究
15.Development and Test Study on Biomass (Straw) Briquettes Combution Equipment;生物质(秸秆)成型燃料燃烧设备研制及试验研究
16.Numerical and Experimental Study on Direct Liquid Injection and Combustion in CI Engine Fueled with Liquefied Alternative Fuels;液化代用燃料直喷燃烧的数值模拟与试验研究
17.Experimental Study on HCCI Engine with DME/Methanol Dual Fuel;二甲醚/甲醇双燃料均质压燃发动机的试验研究
18.Experiments Study on the Effects of Fuel Physical and Chemical Properties on Homogeneous Charge Compression Ignition Combustion;燃料理化特性对均质压燃影响的试验研究
相关短句/例句

test fuel试验燃料
3)fuel tester燃料试验器
4)fuel experimental station燃料试验站
5)Fuel economic performance test燃料经济性试验
6)pumpability test for fuel oil燃料泵送试验
延伸阅读

燃料泵送试验分子式:CAS号:性质:用于确定工业燃料可采用的最低冷贮存温度及最低导温度(作为在实际使用中的泵送性能)的一种试验。将试样热处理后加到弗兰提便携式黏度计杯中,杯浸于82℃浴中保持20min,然后急冷至预定温度。15min后起动黏度计,再过5min后使浴温按0.5℃/min速度冷却。测定表面黏度为0.6Pa·s和2.5Pa·s时的温度分别作为最低输导温度和最低冷贮存温度。